ParkOhio Holdings Corp. - 10-Q quarterly report FY

Indicate by check mark whether the registrant:

      Yes þ   Noo

Indicate by check mark whether the registrant is an accelerated filer (as defined in Exchange Act Rule 12b-2).

      Yes þ   Noo

Number of shares outstanding of registrant’s Common Stock, par value $1.00 per share, as of July 29, 2005: 10,927,298.

The Exhibit Index is located on page 25.

See notes to consolidated financial statements.

      The consolidated financial statements include the accounts of Park-Ohio Holdings Corp. and its subsidiaries (the “Company”). All significant intercompany transactions have been eliminated in consolidation.

      The accompanying unaudited consolidated financial statements have been prepared in accordance with accounting principles generally accepted for interim financial information and with the instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by accounting principles generally accepted in the United States for complete financial statements. In the opinion of management, all adjustments (consisting of normal recurring accruals) considered necessary for a fair presentation have been included. Operating results for the three-month and six-month periods ended June 30, 2005 are not necessarily indicative of the results that may be expected for the year ending December 31, 2005. For further information, refer to the consolidated financial statements and footnotes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2004.

      On December 16, 2004, the Financial Accounting Standards Board (“FASB”) issued SFAS No. 123 (revised 2004), “Share-Based Payment”, which is a revision of SFAS No. 123, “Accounting for Stock-Based Compensation”. SFAS No. 123(R) supersedes APB Opinion No. 25, “Accounting for Stock Issued to Employees”, and amends SFAS No. 95, “Statement of Cash Flows”. Generally, the approach in SFAS No. 123(R) is similar to the approach described in SFAS No. 123. However, SFAS No. 123(R) requires all share-based payments to employees, including grants of employee stock options, to be recognized in the income statement based on their fair values. Pro forma disclosure is no longer an alternative.

      On April 15, 2005, the Securities and Exchange Commission provided a phased-in implementation process for SFAS No. 123(R), which will now be effective for the Company on January 1, 2006. Early adoption will be permitted in periods in which financial statements have not yet been issued. The Company expects to adopt SFAS No. 123(R) as of January 1, 2006. SFAS No. 123(R) permits public companies to adopt its requirements using one of two methods: (1) a “modified prospective” method in which compensation cost is recognized beginning with the effective date (a) based on the requirements of SFAS No. 123(R) for all share-based payments granted after the effective date and (b) based on the requirements of SFAS No. 123 for all awards granted to employees prior to the effective date of SFAS No. 123(R) that remain unvested on the effective date; or (2) a “modified retrospective” method which includes the requirements of the modified prospective method described above, but also permits entities to restate based on the amounts previously recognized under SFAS No. 123 for purposes of pro forma disclosures, either (a) all prior periods presented or (b) prior interim periods of the year of adoption. The Company plans to adopt SFAS No. 123(R) using the “modified prospective” method.

      As permitted by SFAS No. 123, the Company currently accounts for share-based payments to employees using APB Opinion No. 25’s intrinsic value method and, as such, generally recognizes no compensation cost for employee stock options. Accordingly, the adoption of SFAS No. 123(R)’s fair value method could have a significant impact on the results of operations, although it will have no impact on the Company’s overall financial position. The impact of adoption of SFAS No. 123(R) cannot be predicted at this time because it will depend on levels of share-based payments granted in the future. However, had the Company adopted SFAS No. 123(R) in prior periods, the impact of that standard would have approximated the impact of SFAS No. 123 as described in the disclosure of pro forma net earnings and earnings per share in Note G

below. SFAS No. 123(R) also requires the benefits of tax deductions in excess of recognized compensation cost to be reported as a financing cash flow, rather than as an operating cash flow as required under current accounting guidance. This requirement will reduce net operating cash flows and increase net financing cash flows in periods after adoption. While the Company cannot estimate what those amounts will be in the future (because they depend on, among other things, when employees exercise stock options), the amount of operating cash flows recognized in prior years was zero because the Company did not owe federal income taxes due to the recognition of net operating loss carryforwards for which valuation allowances had been provided.

      In the fourth quarter of 2004, the FASB issued SFAS No. 151, “Inventory Costs”, an amendment of Accounting Research Bulletin No. 43, Chapter 4. The amendments made by SFAS No. 151 clarify that abnormal amounts of idle facility expense, freight, handling costs and wasted materials (spoilage) are to be recognized as current-period charges and will require the allocation of fixed production overheads to inventory based on the normal capacity of the production facilities. The guidance is effective for inventory costs incurred during fiscal years beginning after June 15, 2005. Earlier application is permitted for inventory costs incurred during fiscal years beginning after November 23, 2004. The Company does not expect the adoption will have a material impact on the Company’s financial position, results of operations or cash flows.

      The American Jobs Creation Act of 2004 (the “Jobs Act”) was signed into law in October 2004. The Jobs Act provides, among other things, for a tax deduction on qualified domestic production activities and introduced a special one-time dividends received deduction on the repatriation of certain foreign earnings to a U.S. taxpayer, provided certain criteria are met. The FASB issued FASB Staff Position 109-1 to provide guidance on the application of FAS 109 and FASB Staff Position 109-2 to provide accounting and disclosure guidance for the repatriation provision. The Company is reviewing the implication of the Jobs Act, recently released treasury guidance and the FASB staff positions and does not expect the Jobs Act will have a material impact on the Company’s financial position, results of operations or cash flows.

      On August 23, 2004, the Company acquired substantially all of the assets of the Automotive Components Group (the “Amcast Components Group”) of Amcast Industrial Corporation. The purchase price was approximately $10.0 million in cash and the assumption of approximately $9.0 million of operating liabilities. The acquisition was funded with borrowings under the Company’s revolving credit facility. The purchase price and the results of operations of Amcast Components Group prior to its date of acquisition were not deemed significant as defined in Regulation S-X. The results of operations for Amcast Components Group have been included in the Company’s consolidated results since August 23, 2004.

      The tentative allocation of the purchase price has been performed based on the assignment of fair values to assets acquired and liabilities assumed.

      The tentative allocation of the purchase price is as follows:

      The Company has a plan for integration activities and plant rationalization. In accordance with FASB EITF Issue No. 95-3, “Recognition of Liabilities in Connection with a Purchase Business Combination”, the Company recorded accruals for severance, exit and relocation costs in the purchase price allocation. A reconciliation of the beginning and ending accrual balances is as follows:

      On April 1, 2004, the Company acquired the remaining 66% of the common stock of Japan Ajax Magnethermic Company (“Jamco”) for cash existing on the balance sheet of Jamco at that date. No additional purchase price was paid by the Company. The purchase price and the results of operations of Jamco prior to its date of acquisition were not deemed significant as defined in Regulation S-X. The results of operations for Jamco have been included in the Company’s consolidated results since April 1, 2004.

      The components of inventory consist of the following:

      At June 30, 2005, capital stock consists of (i) Serial Preferred Stock, of which 632,470 shares were authorized and none were issued, and (ii) Common Stock, of which 40,000,000 shares were authorized and 11,649,810 shares were issued, of which 10,921,465 were outstanding and 728,345 were treasury shares.

      The following table sets forth the computation of basic and diluted earnings per share:

      The Company accounts for stock-based compensation in accordance with the provisions of APB Opinion No. 25, “Accounting for Stock Issued to Employees”, and related interpretations using the intrinsic value method, which resulted in no compensation cost for options granted. Had compensation cost for stock options granted been determined based on the fair value method of SFAS Nos. 123 and 148, “Accounting for Stock-Based Compensation”, net income and earnings per share would have been as follows:

      The Company adopted SFAS No. 132 (revised 2003), “Employers’ Disclosures about Pensions and Other Postretirement Benefits” which requires the disclosure of the components of net periodic benefit cost recognized during interim periods.

      The Company operates through three segments: Integrated Logistics Solutions (“ILS”), Aluminum Products and Manufactured Products. ILS is a leading supply chain logistics provider of production components to large, multinational manufacturing companies, other manufacturers and distributors. In connection with the supply of such production components, ILS provides a variety of value-added, cost-effective supply chain management services. Aluminum Products manufactures cast aluminum components for automotive, agricultural equipment, heavy-duty truck and construction equipment. Aluminum Products also provides value-added services such as design and engineering, machining and assembly. Manufactured Products operates a diverse group of niche manufacturing businesses that design and manufacture a broad range of high quality products engineered for specific customer applications.

      Results by business segment were as follows:

      Total comprehensive income was as follows:

      The components of accumulated comprehensive loss at June 30, 2005 and December 31, 2004 are as follows:

      The Company has responded to the economic downturn in 2001, 2002 and 2003 by reducing costs in a variety of ways, including restructuring businesses and selling non-core manufacturing assets. These activities generated restructuring and asset impairment charges in these years, as the Company’s restructuring efforts continued and evolved. For further details on the restructuring activities, see Note P to the audited financial statements contained in the Company’s Annual Report on Form 10-K for the year ended December 31, 2004.

      The accrued liability balance for severance and exit costs and related cash payments during the six months ended June 30, 2005 consisted of:

      The Company estimates the amount of warranty claims on sold products that may be incurred based on current and historical data. The actual warranty expense could differ from the estimates made by the Company based on product performance. The following table presents the changes in the Company’s product warranty liability:

      The effective income tax rate for the six-month period ended June 30, 2005 was 10% compared to 12% for the corresponding period in 2004. Only foreign and state income taxes were provided for in both periods because federal income taxes were offset by net operating loss carryforwards that were not recognized previously. At December 31, 2004, the Company had net operating loss carryforwards of approximately $47.7 million. In accordance with the provisions of SFAS No. 109 “Accounting for Income Taxes”, the tax benefits related to these carryforwards and other deferred tax assets have been reserved as of December 31, 2004.

      The Company believes, based on the weight of available evidence, it is more likely than not that all of the Company’s deferred tax assets will not be realized as required by SFAS No. 109.

      On July 20, 2005, the Company completed the acquisition of the assets of Purchased Parts Group, Inc. (“PPG”) for $7.0 million in cash, $2.0 million in a short-term note payable and the assumption of approximately $12.0 million of trade liabilities. The acquisition was funded with borrowings under the Company’s bank revolving credit agreement. The purchase price and the results of operations of PPG prior to its date of acquisition were not deemed significant as defined in Regulation S-X. The Company is currently evaluating the assignment of fair values to assets acquired and liabilities assumed.

Board of Directors and Shareholders

Park-Ohio Holdings Corp.

      We have reviewed the accompanying consolidated balance sheet of Park-Ohio Holdings Corp. and subsidiaries as of June 30, 2005 and the related consolidated statements of income for the three-month and six-month periods ended June 30, 2005 and 2004, the consolidated statement of shareholders’ equity for the six-month period ended June 30, 2005 and the consolidated statements of cash flows for the six-month periods ended June 30, 2005 and 2004. These financial statements are the responsibility of the Company’s management.

      We conducted our review in accordance with the standards of the Public Company Accounting Oversight Board (United States). A review of interim financial information consists principally of applying analytical procedures and making inquiries of persons responsible for financial and accounting matters. It is substantially less in scope than an audit conducted in accordance with the standards of the Public Company Accounting Oversight Board, the objective of which is the expression of an opinion regarding the financial statements taken as a whole. Accordingly, we do not express such an opinion.

      Based upon our review, we are not aware of any material modifications that should be made to the consolidated financial statements referred to above for them to be in conformity with U.S. generally accepted accounting principles.

      We have previously audited, in accordance with standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheet of Park-Ohio Holdings Corp. and subsidiaries as of December 31, 2004 and the related consolidated statements of income, shareholders’ equity, and cash flows for the year then ended, not presented herein, and in our report dated March 10, 2005, we expressed an unqualified opinion on those consolidated financial statements. In our opinion, the information set forth in the accompanying consolidated balance sheet as of December 31, 2004, is fairly stated, in all material respects, in relation to the consolidated balance sheet from which it has been derived.

Cleveland, Ohio

August 8, 2005

      Our consolidated financial statements include the accounts of Park-Ohio Holdings Corp. and its subsidiaries. All significant intercompany transactions have been eliminated in consolidation. Financial information for the three-month and six-month periods ended June 30, 2005 is not directly comparable to the financial information for the same period in 2004 primarily due to acquisitions.

      We are an industrial supply chain logistics and diversified manufacturing business, operating in three segments: ILS, Aluminum Products and Manufactured Products. ILS provides customers with integrated supply chain management services for a broad range of high-volume, specialty production components. ILS customers receive various value-added services, such as engineering and design services, part usage and cost analysis, supplier selection, quality assurance, bar coding, product packaging and tracking, just-in-time and point-of use delivery, electronic billing and ongoing technical support. The principal customers of ILS are in the heavy-duty truck, electrical controls, automotive and other vehicle, industrial equipment, power sports equipment, lawn and garden equipment, and semiconductor equipment industries. Aluminum Products casts and machines aluminum engine, transmission, brake, suspension and other components for automotive, agricultural equipment, construction equipment and heavy-duty truck original equipment manufacturers (“OEMs”), primarily on a sole-source basis. Aluminum Products also provides value-added services such as design and engineering and assembly. Manufactured Products operates a diverse group of niche manufacturing businesses that design and manufacture a broad range of highly-engineered products including induction heating and melting systems, pipe threading systems, industrial oven systems, rubber products, and forged and machined products. Manufactured Products also produces and provides services and spare parts for the equipment it manufactures. The principal customers of Manufactured Products are OEMs and end-users in the steel, automotive, oil and gas, rail, and aerospace and defense industries. Sales, earnings and other relevant financial data for these three segments are provided in Note I to the consolidated financial statements.

      In the first six months of 2005, we experienced continued growth, with record-high sales of $457.7 million and increased earnings compared to the same period in 2004.

      During 2004, we experienced the increased sales and profitability previously forecast, as the manufacturing economy returned to growth, particularly in three of our customer industries; heavy-duty truck, semiconductor equipment and equipment for steel manufacturing. Net sales in 2004 increased 30% compared to 2003. Profitability increased at a rate higher than that of sales, primarily due to cost reductions from our restructuring during the downturn in 2001, 2002 and 2003. During those years, we consolidated 28 supply chain logistics facilities and closed or sold 11 manufacturing plants.

      During 2004, we reinforced the long-term availability and attractive pricing of our liquidity, by refinancing both of our major sources of borrowed funds: senior subordinated notes and the bank revolving credit agreement. In November 2004, we sold $210.0 million of 8.375% Senior Subordinated Notes due 2014. We used the net proceeds to fund the tender and early redemption of $199.9 million of 9.25% Senior Subordinated Notes due 2007. We incurred debt extinguishment costs primarily related to premiums and other transaction costs associated with the tender and early redemption and wrote off deferred financing costs totaling $6.0 million associated with the repurchased senior subordinated notes. In December 2004, we amended our bank revolving credit agreement, extending its maturity to six years so that it now expires in December 2010, increasing the credit limit so that we may borrow up to $200.0 million subject to an asset based formula, and providing lower interest rate levels. Borrowings under the bank revolving credit agreement are secured by substantially all our assets. We had approximately $52.3 million of unused borrowing availability at June 30, 2005. Funds provided by operations plus available borrowings under the bank revolving credit agreement are expected to be adequate to meet our cash requirements.

      We acquired substantially all of the assets of the Amcast Components Group on August 23, 2004 for $10.0 million cash and the assumption of approximately $9 million of operating liabilities. We acquired the remaining 66% of the common stock of Japan Ajax Magnethermic Company (“Jamco”) on April 1, 2004 for cash existing on the balance sheet of Jamco at that date. On July 20, 2005, we completed the acquisition of the

assets of Purchased Parts Group, Inc. for $7.0 million in cash funded with borrowings under the Company’s bank revolving credit agreement, $2.0 million in a short-term note payable and the assumption of approximately $12.0 million of trade liabilities.

      Net sales increased by 16% in the first six months of 2005 compared to the same period in 2004. ILS sales increased primarily due to general economic growth, particularly as a result of significant growth in the heavy-duty truck industry, the addition of new customers, and increases in product range sold to existing customers. Aluminum Products sales increased in the first six months of 2005 primarily due to $37.7 million of sales from manufacturing plants acquired in August 2004 from the Amcast Components Group, partially offset by volume decreases in the automotive industry. Manufactured Products sales increased primarily in the induction, pipe threading equipment and forging businesses. Of this increase, $3.5 million was due to the April 2004 acquisition of the remaining 66% of the common stock of Jamco.

      Cost of products sold increased 18% in the first six months of 2005 compared to the same period in 2004, while gross margin decreased to 15.4% from 16.2% in 2004. ILS gross margin decreased primarily due to steel price increases and changes in product mix. Aluminum Products gross margin decreased primarily due to a combination of the addition of the lower-margin Amcast business and product mix and pricing changes. The $37.7 million of sales from the acquired Amcast business generated significantly lower margins than the existing Aluminum Products business. We expect margins at the acquired plants to increase over time as a result of anticipated post-acquisition cost reductions, price increases and new business. Gross margin in the Manufactured Products segment increased, primarily as a result of increased sales and overhead efficiencies achieved in the induction equipment, pipe threading equipment and forging businesses.

      Consolidated SG&A expenses increased 12% in the first six months of 2005 compared to the same period in 2004. Approximately $2.3 million of the SG&A increase was due to the acquisitions of Jamco and Amcast

Components Group, while bonus expenses of $1.1 million and Sarbanes-Oxley compliance costs of $.6 million also contributed to the increased SG&A expenses. The remainder of the increase was primarily due to increased sales and production volumes. SG&A expenses as a percent of sales decreased by ..4%. SG&A expenses were reduced in the first six months 2005 compared to 2004 by a $.2 million increase in net pension credits reflecting improved returns on pension plan assets.

      Interest expense increased $.9 million in the first six months of 2005 compared to the same period in 2004, primarily due to higher average debt outstanding, partially offset by lower average interest rates during the first six months of 2005. The increase in average borrowings resulted primarily from higher working capital requirements and the purchase of Amcast Components Group in August 2004. The lower average borrowing rate in the first six months of 2005 was due primarily to the lower interest rate of 8.375% on our senior subordinated notes sold in November 2004 compared to the 9.25% interest rate on the senior subordinated notes outstanding during the first six months of 2004. The average borrowing rate in the first six months of 2005 was also reduced by decreased interest rates under our bank revolving credit agreement.

      Income taxes of $1.5 million were provided in the six-month period ended June 30, 2005, a 10% effective income tax rate, compared to income taxes of $1.6 million provided in the corresponding period of 2004, a 12% effective income tax rate. In both periods, these taxes consisted primarily of state and foreign taxes on profitable operations. In neither period did the income tax provision include federal income taxes. At December 31, 2004, our subsidiaries had $47.7 million of net operating loss carryforwards for federal tax purposes. We have recognized a tax benefit for these loss carryforwards only to the extent that they offset our first and second quarter 2005 federal tax provisions.

      Net sales increased 14% in the second quarter of 2005, compared to the same quarter in 2004. ILS sales increased primarily due to general economic growth, particularly as a result of significant growth in the heavy-duty truck industry, the addition of new customers, and increases in product range sold to existing customers. Aluminum Products sales increased in the second quarter of 2005 due to $18.7 million of sales from manufacturing plants acquired in August 2004 from the Amcast Components Group, partially offset by volume decreases in the automotive industry. Manufactured Products sales decreased in the induction and pipe threading equipment businesses, primarily due to timing of capital equipment orders, and in the rubber products business primarily due to weak sales in the automotive industry.

      Cost of products sold increased 16% in the second quarter of 2005 compared to the same quarter in 2004, while gross margin decreased to 15.5% from 16.8% in 2004. ILS gross margin decreased primarily due to steel price increases and changes in product mix. Aluminum Products gross margin decreased primarily due to a combination of the addition of the lower-margin Amcast business and product mix and pricing changes. The $18.7 million of sales from the acquired Amcast business generated significantly lower margins than the existing Aluminum Products business. We expect margins at the acquired plants to increase over time, as a result of anticipated post-acquisition cost reductions, price increases and new business. Gross margin in the Manufactured Products segment increased, primarily as a result of slightly higher margins on capital equipment contracts in the second quarter of 2005.

      Consolidated SG&A expenses increased 3% in the second quarter of 2005 compared to the same quarter in 2004 primarily due to a $.8 million increase due to the acquisition of Amcast Components Group. SG&A expenses as a percent of sales decreased by 1%. SG&A expenses were reduced in the second quarter of 2005 compared to the same period in 2004 by a $.1 million increase in net pension credits reflecting improved returns on pension plan assets.

      Interest expense increased $.5 million in the second quarter of 2005 compared to the same period in 2004, primarily due to higher average debt outstanding, partially offset by lower average interest rates during the second quarter of 2005. The increase in average borrowings resulted primarily from higher working capital requirements and the purchase of Amcast Components Group in August 2004. The lower average borrowing rate in the second quarter of 2005 was due primarily to the lower interest rate of 8.375% on our senior subordinated notes sold in November 2004 compared to the 9.25% interest rate on the senior subordinated notes outstanding during the second quarter of 2004. The average borrowing rate in the second quarter of 2005 was also reduced by decreased interest rates under our bank revolving credit agreement.

      Income taxes of $.7 million were provided in the three-month period ended June 30, 2005, a 9% effective income tax rate, compared to income taxes of $1.0 million provided in the corresponding period of 2004, a 13% effective income tax rate. In both periods, these taxes consisted primarily of state and foreign taxes on profitable operations. In neither period did the income tax provision include federal income taxes. At December 31, 2004, our subsidiaries had $47.7 million of net operating loss carryforwards for federal tax purposes. We have recognized a tax benefit for these loss carryforwards only to the extent that they offset our first and second quarter 2005 federal tax provisions.

      Our liquidity needs are primarily for working capital and capital expenditures. Our primary sources of liquidity have been funds provided by operations and funds available from existing bank credit arrangements and the sale of our senior subordinated notes. On July 30, 2003, we entered into a new bank revolving credit agreement with a group of banks. On November 5, 2003, this credit agreement was amended to provide a facility for our subsidiaries in Canada and the United Kingdom. On December 29, 2004, we amended this credit agreement to extend the maturity to six years, increase the credit line, provide lower interest rate brackets and modify certain covenants to provide greater flexibility. Under the terms of the bank revolving credit agreement, as amended (“Credit Agreement”), we may borrow up to $200.0 million subject to an asset based formula. The Credit Agreement is secured by substantially all our assets. Borrowings under the Credit Agreement, which expires on December 31, 2010, will be used for general corporate purposes.

      Amounts borrowed under the Credit Agreement may be borrowed at the Company’s election at either (i) LIBOR plus 75 — 225 basis points or (ii) the bank’s prime lending rate. The LIBOR-based interest rate is dependent on the Company’s Debt Service Coverage Ratio, as defined in the Credit Agreement. Under the Credit Agreement, a detailed borrowing base formula provides borrowing availability to the Company based on percentages of eligible accounts receivable, inventory and fixed assets. As of June 30, 2005, the Company had $135.6 million outstanding under the Credit Agreement and approximately $52.3 million of unused borrowing availability.

      Current financial resources (working capital and available bank borrowing arrangements) and anticipated funds from operations are expected to be adequate to meet current cash requirements for the next 12 months and through 2010, when the Credit Agreement matures. The future availability of bank borrowings under the Credit Agreement is based on the Company’s ability to meet a Debt Service Coverage Ratio covenant, which could be materially impacted by negative economic trends. Failure to meet the financial covenant could materially impact the availability and interest rate of future borrowings. At June 30, 2005, the Company was in compliance with the Credit Agreement’s Debt Service Coverage Ratio covenant.

      The ratio of current assets to current liabilities was 2.23 at June 30, 2005 versus 1.97 at December 31, 2004. Working capital increased by $29.0 million to $198.8 million at June 30, 2005 from $169.8 million at December 31, 2004.

      During the first six months of 2005, we used $16.7 million from operating activities compared to $7.8 million used in the same period of 2004. The increase in operating cash usage of $8.9 million was primarily the result of a reduction in accounts payable and accrued expenses of $14.1 million in the first six months of 2005 compared to an increase of $37.5 million in the first half of 2004. The increase in accounts payable and accrued expenses in first half 2004 was primarily due to purchases of inventory to support increased sales, which averaged $33.9 million per quarter higher in first and second quarters of 2004 than in fourth quarter 2003. Smaller increases in the first and second quarter sales were recorded in 2005. In addition, accounts receivable increased $9.2 million in the first six months of 2005 compared to year-end 2004, primarily due to increased sales. This was less than the $41.3 million increase in accounts receivable in first half 2004, primarily due to a lower rate of sales growth in 2005. During the first six months of 2005, we invested $7.7 million in capital expenditures. These activities, less a net increase in borrowing of $17.5 million, resulted in a decrease in cash of $5.7 million in the first six months of 2005.

      We do not have off-balance-sheet arrangements, financing or other relationships with unconsolidated entities or other persons. From time to time we enter into forward contracts on foreign currencies, primarily the euro, purely for the purpose of hedging exposure to changes in the value of accounts receivable in those currencies against the US dollar. However, at June 30, 2005, no such hedge contracts were outstanding. We currently use no other derivative instruments.

      Our results of operations are typically stronger in the first six months than the last six months of each calendar year due to scheduled plant maintenance in the third quarter, which coincide with customer plant shutdowns, and holidays in the fourth quarter.

      The timing of orders placed by our customers has varied with, among other factors, orders for customers’ finished goods, customer production schedules, competitive conditions and general economic conditions. The variability of the level and timing of orders has, from time to time, resulted in significant periodic and quarterly fluctuations in the operations of our business units. Such variability is particularly evident at the capital equipment businesses, included in the Manufactured Products segment, which typically ship a few large systems per year.

      This Form 10-Q contains certain statements that are “forward-looking statements” within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act. The words “believes”, “anticipates”, “plans”, “expects”, “intends”, “estimates” and similar expressions are intended to identify forward-looking statements. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance and achievements, or industry results, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. These uncertainties and other factors include, but are not limited to, such things as: general business conditions and competitive factors, including pricing pressures and product innovation; demand for our products and services; raw material availability and pricing; changes in our relationships with customers and suppliers; the financial condition of our customers, including the impact of any bankruptcies; our ability to successfully integrate recent and future acquisitions into existing operations, including our recent acquisition of the assets of Purchased Parts Group, Inc.; changes in general domestic economic conditions such as inflation rates, interest rates, tax rates and adverse impacts to us, our suppliers and customers from acts of terrorism or hostilities; our ability to meet various covenants, including financial covenants, contained in our revolving credit agreement and the indenture governing our senior subordinated notes; increasingly stringent domestic and foreign governmental regulations, including those affecting the environment; inherent uncertainties involved in assessing our potential liability for environmental remediation-related activities; the outcome of pending and future litigation and other claims, including without limitation, asbestos claims; dependence on the automotive and heavy-duty truck industries, which are highly cyclical; dependence on key management; and dependence on information systems. Any forward-looking statement speaks only as of the date on which such statement is made, and we undertake no obligation to update any forward-looking statement, whether as a result of new information, future events or otherwise. In light of these and other uncertainties, the inclusion of a forward-looking statement herein should not be regarded as a representation by us that our plans and objectives will be achieved.

      The consolidated financial statements at June 30, 2005, and for the three-month and six-month periods ended June 30, 2005 and 2004, have been reviewed, prior to filing, by Ernst & Young LLP, our registered public accounting firm, and their report is included herein.

      We are exposed to market risk including changes in interest rates. We are subject to interest rate risk on borrowings under our Credit Agreement, which consisted of borrowings of $135.6 million at June 30, 2005. A 100 basis point increase in the interest rate would have resulted in an increase in interest expense of approximately $.7 million during the six months ended June 30, 2005.

      Our foreign subsidiaries generally conduct business in local currencies. During the first six months of 2005, we recorded an unfavorable foreign currency translation adjustment of $.7 million related to net assets located outside the United States. This foreign currency translation adjustment resulted primarily from the weakening of the US dollar in relation to the Canadian dollar. Our foreign operations are also subject to other customary risks of operating in a global environment, such as unstable political situations, the effect of local laws and taxes, tariff increases and regulations and requirements for export licenses, the potential imposition of trade or foreign exchange restrictions and transportation delays.

      Under the supervision of and with the participation of our management, including our chief executive officer and chief financial officer, we evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15(d)-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this quarterly report.

      Based on that evaluation, our chief executive officer and chief financial officer have concluded that, as of the end of the period covered by this report, our disclosure controls and procedures were effective.

      There have been no changes in our internal control over financial reporting that occurred during the second quarter of 2005 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

      We are subject to various pending and threatened lawsuits in which claims for monetary damages are asserted in the ordinary course of business. While any litigation involves an element of uncertainty, in the opinion of management, liabilities, if any, arising from currently pending or threatened litigation will not have a material adverse effect on our financial condition, liquidity or results of operations.

      At June 30, 2005, we were a co-defendant in approximately 1,000 cases asserting claims on behalf of approximately 9,000 plaintiffs alleging personal injury as a result of exposure to asbestos. These asbestos cases generally relate to the production and sale of asbestos-containing products and allege various theories of liability, including negligence, gross negligence and strict liability and seek compensatory and, in some cases, punitive damages.

      In every asbestos case in which we are named as a party, the complaints are filed against multiple named defendants. In substantially all of the asbestos cases, the plaintiffs either claim damages in excess of a specified amount, typically a minimum amount sufficient to establish jurisdiction of the court in which the case was filed (jurisdictional minimums generally range from $25,000 to $75,000), or do not specify the monetary damages sought. To the extent that any specific amount of damages is sought, the amount applies to claims against all named defendants.

      There are only five asbestos cases, involving 22 plaintiffs, that plead specified damages. In each of the five cases, the plaintiff is seeking compensatory and punitive damages based on a variety of potentially alternative causes of action. In three cases, the plaintiff has alleged compensatory damages in the amount of $3.0 million for four separate causes of action and $1.0 million for another cause of action and punitive damages in the

amount of $10.0 million. In another case, the plaintiff has alleged compensatory damages in the amount of $20.0 million for three separate causes of action and $5.0 million for another cause of action and punitive damages in the amount of $20.0 million. In the final case, the plaintiff has alleged compensatory damages in the amount of $0.41 million and punitive damages in the amount of $2.5 million.

      Historically, we have been dismissed from asbestos cases on the basis that the plaintiff incorrectly sued one of our subsidiaries or because the plaintiff failed to identify any asbestos-containing product manufactured or sold by us or our subsidiaries. We intend to vigorously defend these asbestos cases, and believe we will continue to be successful in being dismissed from such cases. However, it is not possible to predict the ultimate outcome of asbestos-related lawsuits, claims and proceedings due to the unpredictable nature of personal injury litigation. Despite this uncertainty, and although our results of operations and cash flows for a particular period could be adversely affected by asbestos-related lawsuits, claims and proceedings, management believes that the ultimate resolution of these matters will not have a material adverse effect on our financial condition, liquidity or results of operations. Among the factors management considered in reaching this conclusion were: (a) our historical success in being dismissed from these types of lawsuits on the bases mentioned above; (b) many cases have been improperly filed against one of our subsidiaries; (c) in many cases, the plaintiffs have been unable to establish any causal relationship to us or our products or premises; (d) in many cases, the plaintiffs have been unable to demonstrate that they have suffered any identifiable injury or compensable loss at all, that any injuries that they have incurred did in fact result from alleged exposure to asbestos; and (e) the complaints assert claims against multiple defendants and, in most cases, the damages alleged are not attributed to individual defendants. Additionally, we do not believe that the amounts claimed in any of the asbestos cases are meaningful indicators of our potential exposure because the amounts claimed typically bear no relation to the extent of the plaintiff’s injury, if any.

      Our cost of defending these lawsuits has not been material to date and, based upon available information, our management does not expect its future costs for asbestos-related lawsuits to have a material adverse effect on our results of operations, liquidity or financial position.

      The Company held its annual meeting of shareholders on May 26, 2005. The shareholders approved the elections of three directors to serve until the annual meeting of stockholders in the year 2008. The votes cast for each nominee were as follows:

      There were no abstentions or broker non-votes.

      The following exhibits are included herein:

      Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.