================================================================================ SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-K [X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 (NO FEE REQUIRED) FOR THE FISCAL YEAR ENDED JUNE 30, 2002 OR [ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from __________ to __________ COMMISSION FILE NUMBER 000-27548 LIGHTPATH TECHNOLOGIES, INC. (Exact name of registrant as specified in its charter) DELAWARE 86-0708398 (State or other jurisdiction of (I.R.S. Employer incorporation or organization) Identification No) http://www.lightpath.com 3819 OSUNA, NE 87109 ALBUQUERQUE, NEW MEXICO (Zip Code) (Address of principal executive offices) Registrant's telephone number, including area code: (505) 342-1100 SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT: NONE SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT: CLASS A COMMON STOCK, $.01 PAR VALUE Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities and Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. YES [X] NO [ ] Check if there is no disclosure of delinquent filers in response to Item 405 of Regulation S-B contained in this form, and no disclosure will be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X] The registrant's operating revenue for its most recent fiscal year. $12,506,582 The aggregate market value of the registrant's voting stock held by non-affiliates (based on the closing sale price of the registrant's Common Stock on the Nasdaq National Market, and for the purpose of this computation only, on the assumption that all of the registrant's directors and officers are affiliates) was approximately $11,938,915 on August 1, 2002. The number of shares outstanding of each of the issuer's classes of common stock, as of the latest practical date: Common Stock, Class A, $.01 par value 20,677,071 shares CLASS OUTSTANDING AT AUGUST 23, 2002 DOCUMENTS INCORPORATED BY REFERENCE Portions of the Registrant's Proxy Statement for the 2002 Annual Meeting of Stockholders are incorporated by reference into Part III of this report. ================================================================================
LIGHTPATH TECHNOLOGIES, INC. FORM 10-K INDEX ITEM PAGE ---- ---- PART I Description of Business 2 Description of Property 32 Legal Proceedings 32 Submission of Matters to a Vote of Security Holders 33 PART II Market for Common Equity and Related Stockholder Matters 34 Selected Financial Data 36 Management's Discussion and Analysis of Financial Condition and Results of Operations 38 Quantitative and Qualitative Disclosure About Market Risk 49 Financial Statements and Supplementary Data 49 Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 49 PART III Directors and Executive Officers, Compliance with Section 16(a) of the Exchange Act 50 Executive Compensation 53 Security Ownership of Certain Beneficial Owners and Management 53 Certain Relationships and Related Transactions 53 Exhibits, Financial Statement Schedules, and Reports on Form 8-K 54 INDEX TO CONSOLIDATED FINANCIAL STATEMENTS F-1 SIGNATURES 56 CERTIFICATION 57 1
LightPath Technologies, Inc. - Form 10K, June 30, 2002 PART I ITEM 1. DESCRIPTION OF BUSINESS. GENERAL LightPath is a manufacturer of families of high-performance fiber-optic collimator and isolator products, GRADIUM(R) glass lenses and other optical materials used to produce products that manipulate light. We operate through two operating segments; optoelectronics and fiber telecommunications ("telecom"), and traditional optics (e.g. lenses used in lasers, data storage, bar coding, medical equipment, consumer optics, etc.). We manufacture and sell the following types of telecom products: (i) collimators, (ii) isolators and (iii) molded aspheric lenses. Collimators are assemblies that are used to straighten and make parallel diverging light as it exits a fiber. An isolator is used to prevent the back reflection of optical signals that can degrade transmitter and amplifier performance. Molded aspheres are used in telecom applications to couple laser to fiber, fiber to fiber and fiber to other optical devices. Collimators, isolators, molded aspheres and other optical components are used throughout fiber optic systems. Such systems are used by the telecommunications industry with a goal of increased bandwidth, through the development of all optical networks, by combining multiple light streams from individual transmissions onto a single optical fiber. We are also planning to develop other products related to the optoelectronics and telecommunications industry through licenses and relationships with other manufacturers. SEE "CURRENT FOCUS ON PRODUCTS" BELOW. LightPath was incorporated under Delaware law in June 1992 as the successor to LightPath Technologies Limited Partnership, a New Mexico limited partnership (the "Partnership"), formed in 1989, and its predecessor, Integrated Solar Technologies Corporation, a New Mexico corporation ("ISOTEC"), organized in 1985. From our inception in 1985 until June 1996, we were classified as a development stage enterprise that engaged in basic research and development. Our initial objective in 1985 was to improve solar energy technology by creating an optical material that could efficiently bend light from varying angles in order to track the path of the sun across the sky. During this stage, we believe that most of our product sales were to persons evaluating the commercial application of GRADIUM glass (SEE - PRODUCTS: GRADIUM) or using the products for research and development. In 1987, we realized that our early discoveries had much broader application, and we expanded our focus to imaging optics applications. During fiscal year 1997, our operational focus began to shift to product development and sales. We completed numerous prototypes for production orders and received catalog sales of standard lens profiles. We also began to offer standard, computer-based profiles of GRADIUM glass that engineers use for product design. In fiscal year 1998, we began to explore the development of products for emerging markets such as optoelectronics, photonics and solar due to the number of potential customer inquiries into the ability of GRADIUM glass to solve optoelectronic problems, specifically in the areas of fiber telecommunications. In 1998, the resolution of packaging and alignment issues, along with advances made by LightChip Inc. ("LightChip") with WDM equipment, led us to develop a strategy to enter the telecom optical components market. This strategy is built around automated production of telecom components using laser fusion and fiber attachment techniques we developed. We also maintained our emphasis on optical materials where we gained expertise during the development of GRADIUM glass. During fiscal 1998, sales of lenses to the traditional optics market continued with increases in sales of lenses used in the YAG laser market, catalog and distributor sales and lenses used in the wafer inspection markets. During this time, we reorganized internally and realigned our marketing efforts with the purpose of expanding our focus to include the optoelectronics and fiber telecommunications markets in addition to the traditional optics market. See "Sales and Marketing - Optoelectronics and Fiber Telecommunications." In designing our optoelectronic devices, we focused on automation of the manufacturing process. Although many other manufacturers in this industry rely on offshore production to control costs, we believe that automation of the 2
LightPath Technologies, Inc. - Form 10K, June 30, 2002 manufacturing process can yield significant costs savings over the long term. Our patented laser fusion and fiber attachment techniques are highly automated, and we believe these techniques provided improved quality and flexibility to increase manufacturing capacity in response to growth in demand. Our automation concept was expanded upon with our fiscal 2000 acquisition of Horizon Photonics, Inc. ("Horizon") where we employ the use of robotic systems in manufacturing of isolators. In April 2000, we acquired Horizon, a California corporation originally founded in July 1997. Horizon utilizes automated production platforms to manufacture passive optical components for the telecommunications and data communications markets. We acquired all of the outstanding shares of Horizon for approximately 1.4 million shares of Class A Common Stock and $1 million in cash (an aggregate purchase price of approximately $40.2 million, based on the trading price of our common stock). Horizon manufactures isolator products at their Walnut, California facility. In September 2000, we acquired Geltech, Inc. ("Geltech"), a Delaware corporation originally founded in May 1985. Geltech is a manufacturer of precision molded aspheric optics used in the active telecom components market to provide a highly efficient means to couple laser diodes to fibers or waveguides. Geltech also produces lens arrays for optical switches and other applications. We acquired all of the outstanding shares of Geltech for an aggregate purchase price of approximately $28.5 million, comprised of 822,737 shares of Class A common stock (valued at $27.5 million based on the trading price of our common stock) and approximately $1 million in acquisition costs. Geltech manufactures products at its facilities in Orlando, FL. During fiscal 2002, Geltech expanded its manufacturing facility, which will include integrating some of the automation techniques utilized at our other facilities. Our first significant dealings in the telecommunications segment began in June 1997, when we announced we had joined with Invention Machine Corporation to form a joint venture company, LightChip, to develop, manufacture and market the next generation of wavelength division multiplexing ("WDM") systems for use by telecommunication carriers, CATV companies, local area networks and wide area networks system integrators. WDM systems are needed by the telecommunications industry to increase bandwidth by combining multiple light streams from individual transmissions onto a single optical fiber. We formed LightChip in order to serve the growing metro WDM market. Since 1998, LightChip has received approximately $91 million from the issuance of common stock and four series of convertible preferred stock. The initial investors included AT&T Ventures and LightPath. Subsequent investors also include Morgenthaler Ventures, J.P. Morgan Capital and Berkeley International. Our current percentage ownership of LightChip is approximately 13% of total preferred and common shares. LightChip successfully demonstrated a WDM model and had prototypes of several products available in fiscal 2000. LightChip's first product sales occurred in calendar 2001. We licensed the use of GRADIUM glass to LightChip for specific applications. We anticipate no short-term revenue from LightChip. In May 2002 we wrote down our investment in LightChip by $6.3 million to reflect pricing of an equity round of financing at a price per share that was lower than the carrying value of LightPath's investment in LightChip. The telecommunications market has been severely depressed and valuations of start up companies have decreased dramatically. If further funding is at a rate lower than the cost of our previous investment in LightChip we will be required to write down our investment to the current market value. LightChip's business is at an early stage, and the volatile nature of the telecommunications industry makes our investment in LightChip subject to significant risks and uncertainties. OPERATING SEGMENTS AND PRODUCTS We manufacture and sell the following types of telecom products: (i) collimators, (ii) isolators and (iii) molded aspheric lenses and (iv) modules. We also manufacture traditional optics products including: (i) GRADIUM glass products, lenses, prisms and (ii) molded aspheric lenses. GRADIUM glass is an optical quality glass material with varying refractive indices used for optics such as lenses for YAG lasers. Molded aspheres are used in non-telecom applications such as optical data storage, high precision printing, bar coding and by manufacturers of medical equipment. 3
LightPath Technologies, Inc. - Form 10K, June 30, 2002 COLLIMATORS We offer two product levels of collimators: - collimating lenses; and - standard collimators. COLLIMATING LENSES We offer two types of lenses for use in telecommunication applications: TL and GPX-series. Our TL-series lenses are 1.8 mm diameter collimating, rod lenses and are available in 0.18, 0.23 and 0.25 pitch-equivalent lenses. These lenses have an optional angles facet to control back reflection and for ease of assembly. Our TL-series lenses provide a high degree of collimation, design customization, and have tight piece-to-piece control. Customized TL-series lenses with larger diameters can provide beam diameters greater than 2 mm. Our GPX series lenses are available in a wide variety of sizes and focal lengths. These lenses provide high quality aberration control and are easily customized. They are sold separately for assembly into customers' components and are also incorporated into our large beam collimator. These GRADIUM collimating lenses can replace homogeneous lenses with, in many cases, immediate improvements in performance, repeatability and cost. STANDARD COLLIMATOR We demonstrated our first passive optoelectronic product, a single mode fiber collimator assembly ("SMF Assembly") in February 1998. Our SMF Assembly and subsequently improved versions of the standard collimator which offer high quality performance in the areas of back reflection and insertion loss. It is also more compact and we believe it can be manufactured at a significantly lower cost than the competitive products currently available in commercial quantities. The collimator is a key element in all fiber optic systems, including WDM equipment. Collimators straighten and make parallel, diverging light as it exits a fiber. Our standard collimator provides high quality performance in back reflection and insertion loss and can withstand in excess of 10 watts of optical power. This entry level product currently used by the telecommunications industry prevents light from diverging as it exits a fiber, and shepherds it into the next piece of equipment or fiber. ISOLATORS We have developed a family of products that utilize a proprietary micro-fixture design and robotic platform process. This automated process allows for micro-optics to be mounted in small transferable fixtures that are processed in arrays and converted into a variety of optical components and component subsystems. Our platform is capable of producing products such as isolators, gain flatteners, attenuators, filter assemblies, and other volume-oriented optic assemblies for the WDM market. To date, we are manufacturing a qualified family of free-space, laminate and contract-specific isolators. In 2001, we released a new line of isolator assemblies for application in the metro and access telecom markets. This line is based on a flexible manufacturing platform which can address a wide range of customer specifications while supporting lower cost applications. The optical isolator is used to prevent the back reflection of optical signals that can degrade transmitter and amplifier performance. We have developed and qualified an automated platform process that avoids the traditional pitfalls of producing optical isolators. Applicable to a variety of passive optical components, our automated platform process has proven to be an efficient and low cost method for manufacturing isolators without machining tiny metal fixtures and without utilizing a significant level of manual labor. We believe our isolator has a competitive advantage for a certain segment of OEM business, since our proprietary platform allows us to produce unique designs at competitive prices in a flexible, automated process. 4
LightPath Technologies, Inc. - Form 10K, June 30, 2002 MOLDED ASPHERES, MOLDED LENS ARRAYS AND DIFFRACTION GRATINGS The telecom industry has a need for molded aspheres for laser-to-fiber coupling, tunable lasers, DFB lasers and device coupling. Corning Inc. developed the technology we employ for molding a proprietary low melting temperature glass into an asphere lens. With our September 2000 acquisition of Geltech, LightPath obtained the process, key personnel and equipment, and also secured a perpetual license to all Corning's intellectual property associated with the development of precision molded optics. We have continued to refine the process and develop the markets for aspheric lenses. Our focus is on providing custom optical solutions to meet unique customer needs in the rapidly changing telecommunications market as well as extending our customer base in markets outside of telecom. We provide aspheric lenses of sizes up to 15mm, and we are a developer of sub-millimeter optics. We have also developed a line of molded lens arrays. We have developed a process to mold lens arrays capable of producing optical components with very small lens diameters and very high lens density (for example, 40,000 optical elements in a two-inch diameter array). Although we have a unique and proprietary line of all-glass diffraction gratings (StableSil(R)) for telecom applications, there currently is no significant activity in the market for this product line and we have discontinued further development efforts in this area. MODULES We have introduced a number of modules which will combine two or more of our current components, such as the isolator and molded aspheres, into a subassembly. During fiscal 2002 we began to expand modules offerings and to automate the manufacturing of modules to take advantage of low cost assembly. Current passive optical modules include the OASIS(TM) and Vectra(TM) collimator arrays. The expansion of these modules will continue into fiscal 2003. GRADIUM GRADIUM glass is an optical quality glass material with varying refractive indices, capable of reducing optical aberrations inherent in conventional lenses and performing with a single lens tasks traditionally performed by multi-element conventional lens systems. We believe that GRADIUM glass lenses provide advantages over conventional lenses for certain applications. By reducing optical aberrations and the number of lenses in an optical system, we believe that GRADIUM glass can provide more efficient light transmission and greater brightness, lower production costs, and a simpler, smaller product. While we believe that other researchers have sought to automate production of passive optical components and to produce optical quality lens material with the properties of GRADIUM glass, we are not aware of any other person or firm that has developed a repeatable manufacturing process comparable to our abilities or with the ability to produce such material on a prescribable basis. PRODUCTS IN DEVELOPMENT The current focus of our development efforts has been to develop new products based on our optical and automation platforms in the areas of isolators, optical subassemblies, micro-collimators and lens arrays for use in the telecommunications field, and other markets which use optical components. Our original process patent is for producing an optical quality material, GRADIUM glass, with an "axial" gradient refractive index (i.e., the index gradient runs parallel to the optical lens axis, rather than perpendicular to the lens axis or "radial"). The GRADIUM glass designated curve is achieved by the controlled combination of multiple glass optical densities. We have developed a set of proprietary software design tools so that the light upon leaving the glass can be precisely modeled. GRADIUM glass lenses can be produced across a large diameter range (currently 1mm-100mm). Growth in our manufacturing capabilities has led to improved yield and automation, advancing our goal of producing competitively priced products. 5
LightPath Technologies, Inc. - Form 10K, June 30, 2002 We were issued a patent in fiscal year 2000 for the development of a process utilizing high-powered lasers for fusion, splicing and polishing of optical material to include optical fiber. This patent is the basis of our collimator production technology. We were issued our first of three patents relating to our robotic assembly platform used for the manufacturing of isolators in fiscal year 2001 and have several other patents in process. We have approximately 50 US and foreign patents in the areas of precision molded optics and Sol-Gel technologies. We also hold the right to certain materials we believe are key to the development of high precision molded optics. In addition, we utilize other optical materials and specialized optical packaging concepts to manipulate light and perform research and development for optical solutions in the fiber telecommunications and traditional optics markets. MODULES During fiscal 2001, we introduced a number of modules which will combine two or more of our current components, such as the isolator and molded aspheres, into a subassembly. During fiscal 2002 we began to expand modules offerings and to automate the manufacturing of modules to take advantage of low cost assembly. Current passive optical modules include the OASIS(TM) and Vectra(TM) collimator arrays. The expansion of these modules will continue into fiscal 2003. Demand for modules is driven by specific customer needs. Utilizing automation techniques, we are able to provide active alignment of multiple components and deliver a subsystem optimized for the customers unique needs with very low insertion loss. SWITCHES AND COLLIMATOR ARRAYS During fiscal 2002, we had planned on shipment of the 1XN opto-mechanical switch based upon a patent licensed from Herzel Laor. Due to the current economic environment, we elected to suspend expenditures required to launch this product in fiscal 2002. We will concentrate instead on development of further enhancements to existing product lines. Using the automated alignment techniques learned in production of the 1XN opto-mechanical switch, we proceeded with the development of collimator arrays. We successfully shipped prototypes of this product in the fourth quarter of fiscal 2002 and intend to expand in this area in fiscal 2003. SOL-GEL TECHNOLOGY We have developed a replication process to manufacture glass diffractive optical components using Sol-Gel technology. This process allows the fabrication by replication of these complex optics at a fraction of the cost of conventional technologies such as photolithography and reactive-ion etching. In addition, we have produced other Sol-Gel based components including the high volume manufacture of silica substrates for optically active windows used in toxic gas detection and the development and production of unique solid-state calibration filters. We have practiced Sol-Gel technology for several years and have successfully addressed many different markets over the years. We have significant knowledge in this field with protection through extensive know-how, trade secrets, and 7 issued patents. In 2000, we introduced a line of all-glass gratings in response to the anticipated demand from the telecommunications industry for the fabrication of DWDM and other devices requiring high performance and sturdy gratings. These all-glass gratings present significant advantages over available gratings due to outstanding environmental resistance, high performance and low cost. 6
LightPath Technologies, Inc. - Form 10K, June 30, 2002 Although we continued to pursue the development of additional products based on Sol-Gel technology and had included in our new product plans inorganic waveguides, active waveguides and arrayed waveguide gratings to be used in telecommunications applications, we have delayed these development efforts due to the current economic environment. We have elected to delay expenditures required to launch these products until we see a substantial increase in demand from our customers and the market. BUSINESS STRATEGY Our management and marketing focus historically has been organized with the intent of serving two separate markets: (1) optoelectronics and fiber telecommunications ("telecom"), and (2) traditional optics (e.g. lenses used in lasers, data storage, bar coding, medical equipment, consumer optics, etc.). We believe that GRADIUM glass and other optical materials can potentially be marketed for use in many optics and optoelectronics products. During the last 18 months, the telecom equipment market has slowed dramatically, including the optical components segment of the market. As service providers rapidly cut their capital spending budgets, inventories of hardware systems, subsystems, and components grew quickly due to a lag in vendors adjusting their build rates to the downturn in demand. Although inventories are believed to be dropping, there is still a sizeable inventory of components that must be consumed before supply and demand come back in balance. We believe this reduction in demand for telecom components will continue into fiscal 2003, therefore, we are adjusting our business plans. In June 2002 we announced plans for fiscal 2003 where we intend to consolidate lens product lines in Florida and reorganize internally into three groups; the Optical Lens Group; the Laser Component Group; and the Optical Integration Group. The Optical Lens Group will manage the collimator and aspheric lens products, which continues as the core capability for LightPath. These product lines will be consolidated in the Orlando, Florida facility. We believe the aspheric lens product line, in particular, has broad applicability to market segments beyond telecom. We are aggressively pursuing new opportunities in the application areas of medical devices, barcode scanners, optical data storage, machine vision, sensors, and environmental monitoring. In response to our customers' requirements for a second site capability and optical packaging solutions, we intend to increase our emphasis on the integrated platform segment of our business within the Laser Component Group. We have had great success with our isolator product line, and as our customers ask for more demanding optical performance we see a great opportunity to provide the entire solution from laser to fiber. The Laser Component Group will be investing a modest amount in capital expenditures and research and development, in support of optical generation and detection applications, such as transmitters, transceivers and pumps. The Optical Integration Group will allow LightPath to augment current passive optical packages such as OASIS(TM) and Vectra(TM) collimator arrays with new innovative passive optical modules, such as multiport and hybrid devices, to provide effective optical management solutions for our customers. OPTOELECTRONICS AND FIBER TELECOMMUNICATIONS (TELECOM PRODUCTS) Optoelectronics technologies consist of an overlap of photonics and electronics and are key enablers of "Information Age" technologies, such as fiber optic communications, optical data storage, laser printers, digital imaging, and sensors for machine vision and environmental monitoring. The telecom/datacom networks have experienced explosive growth. The dramatic rise of the Internet, office automation, videoconferencing, local and wide area networking, and remote access telecommunications has fueled the demand for more and more network capacity in both long-haul telecommunications and cable television networks. Given the inherently faster speed of light signals in fiber-optic networks and their immunity from electromagnetic interference, fiber-optic systems are replacing existing copper wire networks for long-haul (more than 600 kilometers) telecommunications networks. Cable television networks are also shifting to 7
LightPath Technologies, Inc. - Form 10K, June 30, 2002 fiber-optic solutions for the distribution of signals from the broadcast station to the local cable distribution hubs. Today, fiber-optic cable is the primary medium for long-haul telecommunications and cable television networks and is making inroads to replace copper in the shorter distance "metro loops" that serve larger metropolitan and other public networks with transmission distances of less than 100 kilometers. COLLIMATORS Prior to 1998, we targeted various optoelectronic industry market niches as potential purchasers of our GRADIUM glass products. During 1998, we began the development of products for the emerging optoelectronics markets, specifically in the areas of fiber telecommunications. We demonstrated our first passive optoelectronic product, the SMF Assembly, in 1998. This product is manufactured with automated production techniques we developed which utilizes laser fusion and fiber attachment. During 1999 and 2000, we expanded this product line, demonstrating to the telecommunication optical components industry that we can provide low cost products and solutions to meet their telecom-related collimator needs. ISOLATORS AND WDM SYSTEMS The demand for increased bandwidth in fiber-optic networks has led to the widespread use of a once-theoretical method for transmitting multiple signals at slightly different wavelengths through a single fiber to achieve efficient use of fiber capacity. This technique, known as wavelength division multiplexing, or WDM, requires separate source lasers transmitting slightly different wavelengths for each signal or "channel" and more complex modulators and optical amplifiers to control and amplify the signal in the network. WDM systems, originally developed for eight separate channels in 1996, are currently being designed to carry as many as 128 separate channels with 0.4 of a nanometer in differentiation between wavelengths. In theory, a single pair of optical fibers can carry more than 10 terabits of information per second, which is roughly equivalent to 156 million voice channels or 500,000 simultaneous two-way HDTV channels. Through our investment in LightChip, we have positioned ourselves with products that are designed for use within WDM systems. With our acquisition of Horizon, we acquired automated production of passive optical components for the telecommunications and data communications markets. We believe our primary strength is the design of optical subassemblies for automation. Our team has a comprehensive background in the field of fiber optics, taking research efforts "off the bench" and into manufacturing. Drawing upon years of experience in automation, optoelectronic package design and testing, and a multitude of technical disciplines, we have demonstrated novel solutions for today's WDM design and processing challenges. By targeting product families and creating common platforms for each, we can rapidly tailor variations within a family, as the customer demands, without major process or tooling changes. This philosophy is evident in our proprietary micro-fixture design and automated platform manufacturing process. This platform allows robots to mount micro-optics in small transferable fixtures that can be processed at various levels and converted into a variety of finished products. We believe our isolator has a competitive advantage for a certain segment of OEM business, since our proprietary platform allows us to produce unique designs at competitive prices in a flexible, automated process. In fiscal 2002, we went into production on a new line of isolator assemblies for application in the metro and access telecom markets. This new line is based on a flexible manufacturing platform which can address a wide range of customer specifications while attracting lower cost applications. ASPHERIC LENSES Lenses in telecommunications applications perform two major tasks. One is for the collimation of light as it emerges from the fiber. This collimated light then passes through multiple components including isolators, filters, and a second collimator, before returning back into a fiber. The second major task is coupling light at the output of a laser diode to a fiber or waveguide. Aspheric lenses and lens arrays are used in both of these configurations. 8
LightPath Technologies, Inc. - Form 10K, June 30, 2002 Telecom products manufactured using this technology include aspheric lenses, sub-millimeter lenses and lens arrays. Several new products using this technology are under development. These new products include low-cost aspheric lenses, anamorphic lenses, cross cylinder lenses and multifunctional optical components. All of these products also have key relevancy for many different market applications outside of the telecommunications market. SWITCHES In 1999, we entered into an exclusive licensing agreement with Herzel Laor for the commercialization of two fiberoptic opto-mechanical switch technologies. In August 2000 we introduced the LP1600 opto-mechanical switch. The LP1600 is a 1xN optical switch, which is designed to route one incoming fiber into one-of-many output fibers. The current design allows customers to select custom configurations of 4 to 24 output channels. The LP1600 had patent applications filed and was sold in small quantities in fiscal 2002. We planned to manufacture the LP1600 at our Albuquerque locationhowever, due to the current economic environment we suspended expenditures required to launch this product in fiscal 2002. OTHER PRODUCTS We are currently developing additional optoelectronics products based on our proprietary technologies. Key strategic alliances with technology and marketing partners to design, build and sell next generation integrated components and devices may be considered in the future. However, we do not currently have any agreements, other than those discussed above, to enter into any strategic alliances for this purpose. TRADITIONAL OPTICS LASER MARKETS FOR GRADIUM LENSES We initially emphasized laser products because we believed GRADIUM lenses could have a substantial immediate commercial impact in laser products with a relatively small initial investment. The majority of lens sales is due to optics used by YAG lasers. Generally, optical designers can substitute our standard GRADIUM glass components for existing laser lens elements. Lasers are presently used extensively in a broad range of consumer and commercial products, including fiber optics, robotics, wafer chip inspection, bar code reading, document reproduction and audio and video compact disc machines. Because GRADIUM glass can concentrate light transmission into a much smaller focal spot than conventional lenses, we believe, and customers test results confirm, that GRADIUM glass has the ability to improve the current standard of laser performance. In 1998, our distributor, Permanova Lasersystems AB of Sweden, completed a lengthy trial and testing period on GRADIUM YAG lenses which they qualified into systems produced by Rofin-Sinar GmbH, a major OEM manufacturer of high-powered CO2 and YAG lasers, headquartered in Germany. Our growth strategy is to increase our emphasis on key laser market niches and establish the necessary products and partnership alliances to sell into Europe and Asia as well as the U.S. market. During fiscal 1999, LightPath and Rodenstock Prazisionsoptik GmbH (Rodenstock) executed an agreement to transfer to Rodenstock the exclusive, application-related utilization and distribution of GRADIUM lenses throughout Europe. The agreement was for an initial five-year period. Rodenstock sold their precision optics division to Linos AG, a pioneer in the field of photonics, in June 2000. We believe our agreement and relationships will continue to grow under the Linos AG/Rodenstock alliance. We also have established relationships with eight additional foreign distributors. MOLDED ASPHERES Through our acquisition of Geltech, we purchased the rights to the Precision Molded Optics process. Our traditional optics product applications are molded aspheres used in optical data storage, high precision printing, bar coding and by manufacturers of some medical equipment. 9
LightPath Technologies, Inc. - Form 10K, June 30, 2002 ORIGINAL EQUIPMENT MANUFACTURERS ("OEMS") In addition to laser applications, through our printed and Internet on-line catalog, we offer a standard line of GRADIUM glass lenses for broad-based sales to optical designers developing particular systems for OEMs or in-house products. Because complex systems contain many optical components, and GRADIUM glass lenses can be utilized to reduce the number of lens elements in such systems, we believe that GRADIUM glass lenses can simplify the design and improve the performance of complex optical systems. However, design and production of an optical product is a lengthy process, and it may take years for producers to redesign complex optical systems using GRADIUM glass, reconfigure the product housing, re-engineer the assembly process and commence commercial quantity orders for GRADIUM glass components. Accordingly, we intend to focus our long-term marketing efforts on emerging industries, such as optoelectronics and fiber telecommunications designed in next-generation optical systems, and performance driven industries that are seeking to optimize performance of existing optical products. We believe OEM relationships may improve our ability to develop more sophisticated technology development methods and products, although there can be no assurances in this regard. Such OEM relationships have been utilized in the development of prototype lenses for manufacturers of endoscopes and wafer chip inspection equipment. We will evaluate future OEM projects based on a number of factors, including our assessment of the OEM's ability to fund the design effort for the project and expected impact upon future sales. SALES AND MARKETING Extensive product diversity and varying levels of product maturity characterize the optics industry. Product markets range from consumer (e.g., cameras, copiers) to industrial (e.g., lasers, data storage), from products where the lenses are the central feature (e.g., telescopes, microscopes) to products incorporating lens components (e.g., robotics, semiconductor production equipment). Emerging technology markets require optics for bandwidth expansion and data transfer improvement in the drive to achieve an all optical network. As a result, the market for our products is highly segmented and no single marketing approach will allow us to access all available market segments. Since fiscal 1998, our primary marketing objective has been the development and marketing of passive components for the optoelectronics segment of the telecommunications industry and laser based products in the general optics product arena. The narrowing of our product focus was in response to the opportunities in the emerging optoelectronics market where we believe we have key advantages and our success in sales of laser based products. We believe our key advantages are: - we have developed packaging solutions for optoelectronic products; - we have been able to develop patentable processes with optical materials that provide product solutions; and - through automation, we have developed low cost production techniques. Combining these elements, we believe we have the opportunity to enter into key optical telecommunications markets with products that are enabling and cost effective. Although the same design constraints and technological shortcomings of conventional optical technology and materials restrict all optical products, we believe that our proprietary manufacturing processes, as well as the high quality associated with GRADIUM glass, results in a competitive advantage over other glass products currently available in our targeted markets. With our acquisitions, we have added to our line of passive optical components while maintaining our emphasis on low cost production from automation, and added a product line sold into the active optical component markets as well as products to be sold into DWDM systems. 10
LightPath Technologies, Inc. - Form 10K, June 30, 2002 OPTOELECTRONICS AND FIBER TELECOMMUNICATIONS In order to be more accessible to potential customers we have divided our sales staff into the following territorial areas because of their high concentrations of telecom users: - NorthWest - SouthWest - MidWest - SouthEast - NorthEast In addition, we have formalized relationships with eight industrial, optoelectronics and medical component distributors located in foreign countries to assist in distribution of telecom products outside the United States. Because the optics industry is highly fragmented, we utilize distributors and our Internet site (www.lightpath.com) as vehicles for broader promotion of our telecom products. We have placed, and will continue to place, print media advertisements in various trade magazines and will participate in appropriate domestic and foreign trade shows. The target market for our current products is concentrated within several industry experts such as Corning, Inc., JDS Uniphase Corporation and Alcatel Optronics. The lens and standard collimator are used in free space applications where coupling to an optical fiber is required. We are developing these initial products into families of products as variations are made to meet specific customer requirements. Our focus will be on the standard collimator as we believe that the standard collimator will replace the collimating lens in many applications. Since many of our targeted customers currently assemble their own collimators, our sales approach will be to highlight the standard collimator price/performance ratio (value) and compare that to the customer's internal costs plus their lost opportunity cost. During fiscal 2001, our large beam collimator was selected as the primary customized collimator built specifically for Corning's PurePath(TM) Wavelength Selective Switch. This product utilizes both a GRADIUM lens and a standard collimator which takes advantage of the unique properties of both components. Telecom product sales for fiscal years 2002, 2001, and 2000 were approximately $8.3 million, $21.1 million, and $1.5 million, respectively, primarily generated by targeting our sales efforts on collimators and isolators, entry level products currently used by the telecommunications industry. Our major telecom customers in fiscal 2002, 2001 and 2000 included Finisar Corp., Agere Systems, Inc., Lucent, Inc., Corning, Inc. and JDS Uniphase Corporation. Our marketing plan for isolators targets niche players in the telecom/datacom markets with high volume potential for the next decade. Specifically, we are focusing on the following market segments: (i) WDM long-haul system manufacturers, (ii) cable television carrier system manufacturers, (iii) "metro loop" system manufacturers, and (iv) Fiber Channel/Gigabit Ethernet system manufacturers. The largest isolator customers were Finisar Corp. with sales of approximately $2.4 million in fiscal 2002, and Agere Systems, Inc. ("Agere") (formerly the Microelectronics division of Lucent Technologies Inc.) with sales of $11.4 million and $900,000 in fiscal 2001 and 2000, respectively. These customers represent two platforms: free space isolators and a low-cost isolator platform to be used in the metro access markets. Our marketing plan for molded aspheres targets the asphere lenses used with DFB lasers and tunable lasers, major customers being Alcatel and other telecom companies. In addition, we are focusing on several high volume non-telecom opportunities in defense, medical devices, other laser applications as well as data storage. In addition to our telecom products business, we are planning to provide modules where several of our components are integrated with automation to provide a subassembly to the customer. We have introduced a number of modules which will combine two or more of our current components, such as the isolator and molded aspheres, into a subassembly. During fiscal 2002 we began to expand 11
LightPath Technologies, Inc. - Form 10K, June 30, 2002 modules offerings and to automate the manufacturing of modules to take advantage of low cost assembly. Current passive optical modules include the OASIS(TM) and Vectra(TM) collimator arrays. We believe these modules have the potential to provide higher gross profit margins than the individual components. We are also addressing our customers DWDM needs by focusing our development team efforts on a "micro-collimator" assembly to target numerous requests for manufacturing services related to collimating packages. Our micro lens array has application in optical switching, waveguide coupling and fiber array coupling. Generally, inquiries for these products have been coming from producers of next generation switches, MEMS and other optical devices requesting assistance with packaging and volume production. STRATEGIC ALLIANCES WDM MODEL AND DWDM PROTOTYPES Since fiscal 1997, we have entered into strategic alliances with other companies in an effort to quickly enter into the optoelectronics markets. For example, we currently own approximately 13% of the preferred and common shares outstanding of LightChip. LightChip successfully demonstrated a WDM model and DWDM prototypes with product sales beginning in calendar 2001. We licensed the use of GRADIUM glass, as well as any newly developed intellectual property, in the field of fiber-optic communication systems, components and devices to LightChip. We have retained the rights to the specific areas of fiber collimators, isolators, amplifiers, circulators, couplers, splitters and fiber-optic switches. SWITCHES In 1999, we entered into an exclusive licensing agreement with Herzel Laor for the commercialization of two fiberoptic opto-mechanical switch technologies. In August 2000 we introduced the LP1600 opto-mechanical switch. The LP1600 is a 1xN optical switch, which is designed to route one incoming fiber into one-of-many output fibers. The current design allows customers to select custom configurations of 4 to 24 output channels. The Company planned to manufacture the LP1600, for which patent applications have been filed, at its Albuquerque location. Due to the current economic environment we elected to suspend expenditures required to launch this product in fiscal 2002. TRADE SHOWS We have displayed our product line additions and enhancements at various trade shows each year. During the third quarter of fiscal 2002, the Company announced five new products designed for use in both long-haul and metropolitan area (metro) networks which we displayed at the March 2002 Optical Fiber Communication Conference ("OFC") held in Anaheim, California. These five new products are examples of how we believe LightPath can provide added value to our customers. Each one utilizes advanced manufacturing technology to `build-in' much of the optical alignment work that was formerly performed by the customer. They also underscore LightPath's strategic directive of broadening our base of innovative optical components and assemblies by combining application specific engineering with automated manufacturing. These shows provide an opportunity for us to meet with potential customers, distribute information and samples of our products and to discuss test results from samples previously sent. TRADITIONAL OPTICS Prior to our IPO in 1996, our resources had been applied primarily to research and development; consequently, LightPath and GRADIUM glass were not introduced to the commercial market. Promotion of our products through the Internet, trade advertising in industrial magazines and participation in numerous domestic and foreign trade shows increased interest and awareness of our products, resulting in additional lens sales. Traditional optics lens sales for fiscal years 2002, 2001 and 2000 were approximately $4.2 million, $5.1 million and $768,000, respectively. The growth in 2001 was primarily due to the 12
LightPath Technologies, Inc. - Form 10K, June 30, 2002 acquisition of Geltech's traditional optics business in September 2000, which accounted for $4 million of traditional optics sales in fiscal 2001. Asphere products are used in data storage and by manufacturers of medical equipment. Lens sales are primarily due to sales of lenses for laser and wafer chip inspection markets. Our sales efforts in targeting laser applications, an area where GRADIUM lenses increase the quality of YAG laser beams and reduce the focal spot size, has received market acceptance. Our primary customers in fiscal 2002, 2001 and 2000 included Presstek, Coherent, Gerhard Franck Optronik GmBH and Permanova Laser Systems AB. INDUSTRIAL AND OPTOELECTRONIC DISTRIBUTORS IN FOREIGN COUNTRIES We have formalized relationships with eight industrial and optoelectronic distributors located in foreign countries. Because the optics industry is highly fragmented, we utilize distributors and the Internet as vehicles for broader promotion of GRADIUM glass products. Our Internet web site (www.lightpath.com) is one source of information on GRADIUM glass, and potential customers can view products from our catalog. We have placed, and will continue to place, print media advertisements in various trade magazines and will participate in selected domestic and foreign trade shows. We have developed a network of selected independent optical engineering firms to promote the sale of GRADIUM glass products. Presently, eight optical engineering firms provide such optical design services and support. PROMOTIONAL AND EDUCATION ACTIVITIES FOR OPTICAL DESIGNERS As part of our marketing strategy, we have provided promotional and educational activities concerning GRADIUM glass and its properties, intended to familiarize and educate optical engineers from numerous, high performance optics markets. We presently have six standard profiles of GRADIUM glass that engineers can use for product design, and we will continue to develop more profiles as required. Our existing GRADIUM glass profiles are compatible with established software design programs utilized by optical designers, enabling designers to integrate GRADIUM glass into their designs. While this enables designers to incorporate GRADIUM glass into their existing product design, we must increase familiarity with GRADIUM glass so that designers will be more likely to incorporate GRADIUM glass in their original designs. If a standard GRADIUM glass profile is not suited for a specific design, we have the capability to create a custom GRADIUM glass profile for the customer. Our objective is to educate optical designers, through the distribution of materials, about the potential of GRADIUM glass to provide them with additional flexibility and design freedom to create optical products more efficiently and with enhanced performance. COMPETITION OPTOELECTRONICS AND FIBER TELECOMMUNICATIONS The telecommunications marketplace is renowned for its product quality and reliability demands. Every item must pass rigorous testing before being designed into devices and systems. We must establish a reputation as a quality supplier. The products must perform as claimed so that the customer will not need to test after the initial qualification, and we must be open to continuous improvement of our products and processes. If we can pass these tests we believe we can become a primary or second source supplier to the industry. However, this industry is subject to, among other risks, intense competition and rapidly changing technology, and there can be no assurances as to our ability to anticipate and respond to the demands and competitive aspects of this industry. COLLIMATORS AND MOLDED ASPHERES There are currently only a handful of direct competitors for our collimating lenses and standard collimator. Nippon Sheet Glass currently supplies the majority of collimator lenses. The collimator lens is a separate business from Nippon Sheet Glass's primary product, automotive glass. Our standard collimator competes against existing collimator assemblies, which are produced by Casix(acquired by JDS Uniphase), DiCon Fiberoptics, Samsung Electronics, Wave Optics and Oz Optics. There are also a number of companies that assemble their own collimators, such as Lucent, and JDS Uniphase. These competitors have greater financial, manufacturing, marketing and other resources 13
LightPath Technologies, Inc. - Form 10K, June 30, 2002 than LightPath. We are aware of current research projects that integrate optical technologies, such as existing planar waveguide structures, which have the potential to replace some of the current collimator applications. We believe that many of these products currently have limitations which have made their wide spread usage unfeasible, thereby reducing the likelihood that they will replace current collimator applications in the immediate future. We compete with Hoya Corporation and Asahi Corporation in the molded asphere lens market. In addition, for lower performance driven applications, Geltech competes with manufacturers of plastic aspheres. ISOLATORS We compete with a few specific players in the isolator segment of the WDM components market. These include Namiki, TDK, Tokin, Kyocera, Sumitomo and Kaifa Technology (acquired by E-TEK/JDS Uniphase). Our strategy does not involve direct competition with the "catalog" offerings of these companies; rather, we focus our efforts on designing and manufacturing specialty and hybrid components according to particular OEM specifications by delivering flexible and novel packaging solutions achieved by our automated platform. TRADITIONAL OPTICS The market for optical components is highly competitive and highly fragmented. We compete with manufacturers of conventional spherical lens products and optical components, providers of aspheric lenses and optical components and producers of optical quality glass. To a lesser extent, we compete with developers of radial gradient lenses and optical components. Many of these competitors have greater financial, manufacturing, marketing and other resources than we do. Manufacturers of conventional lenses and optical components include industry giants such as Eastman Kodak Corporation, Nikon, Olympus Optical Company, Carl Zeiss and Leica AG. In addition to being substantial producers of optical components, these entities are also some of the primary customers for such components, incorporating them into finished products for sale to end-users. Consequently, these competitors have significant control over certain markets for our products. In addition, although these companies do not manufacture axial gradient lenses, and although we believe that we have substantial technological expertise in this field, these companies could rapidly pursue development of axial gradient products, in light of their substantial resources. In addition, our products compete with other products currently produced by these manufacturers. Manufacturers of aspheric lenses and optical components provide significant competition for our traditional optics in providing products that improve the shortcomings of conventional lenses. Aspheric lens system manufacturers include Eastman Kodak Corporation, Hoya Corporation, Schott Glass, Hikari Glass Co., Ltd. and U.S. Precision Lens. The use of aspheric surfaces provides the optical designer with a powerful tool in correcting spherical aberrations and enhancing performance in state-of-the-art optical products. But the nonspheric surfaces of glass "aspheres" are difficult to fabricate and test, are limited in diameter range and induce light scatter. Plastic molded aspheres, on the other hand, allow for high volume production, but primarily are limited to low-tech consumer products that do not place a high demand on performance (such as plastic lenses in disposable cameras). Molded plastic aspheres appear in products that stress weight, size and cost as their measure of success. To a lesser extent, we compete with manufacturers of other gradient index lens materials. Currently, processes to produce gradient index materials include ion-exchange, chemical vapor deposition and Sol-Gel, all of which produce small radial gradient index rods with limited applications. Manufacturers using these processes include Nippon Sheet Glass, Olympus Optical Company, and Gradient Lens Corporation. We believe that these processes are limited by the small refractive index change achievable (typically, < 0.05), the small skin depth of the gradient region (typically < 3 mm), the lack of control of the shape of the resultant gradient profile, limited glass compositions, and high per unit manufacturing costs. 14
LightPath Technologies, Inc. - Form 10K, June 30, 2002 MANUFACTURING COLLIMATORS AND GRADIUM LightPath has full scale commercial manufacturing operations in its Albuquerque, New Mexico facilities, totaling 30,300 square feet including a 5,000 square foot clean room that houses our manufacturing stations. Each station includes laser fusion and housing equipment and an automated testing process. We currently have two laser polishing stations in operation. With this equipment, we believe our facilities can meet the capacity requirements of our planned telecom products for several years. Due to manufacturing techniques we have developed, we believe our costs to produce the standard collimator will be less than the traditional industry manufacturing costs. In April 1996, we built out our lens manufacturing plant for traditional optics. We believe that the present manufacturing facility can produce in excess of 2 million lens blanks per year depending on product size and mix. However, in the fourth quarter of fiscal 2002 we sold our larger, more sophisticated furnaces, milling machines and metrology equipment to Hikari Glass Co., Ltd. of Japan (a 40% owned subsidiary of Nikon) ("Hikari") as part of a licensing agreement whereby they will manufacture GRADIUM glass for LightPath and distribute to their own customers. Much of our product qualification is performed in-house. Our test and evaluation capabilities include Damp Heat, High/Low Temp Storage, and a Thermal Shock Oven, which are representative of the equipment required to meet BellCore Testing requirements. Our engineering departments have full design and CAD/CAM technical support. The implementation of Statistical Process Controls has allowed us to eliminate costly manual testing operations. We believe the ability to maintain consistently high quality at the manufacturing stage represents a significant and distinctive characteristic of our production capabilities. Quality control will be critical to our ability to bring telecommunication products to market as the customers demand rigorous testing prior to purchasing a product. During the fourth quarter of fiscal 2002, the Company announced plans to relocate the collimator and GRADIUM glass manufacturing operations from Albuquerque to Orlando by September 30, 2002. We intend to move a portion of our manufacturing and product qualification equipment to this facility. We wrote down underutilized assets at June 30, 2002 and these assets will be disposed of during fiscal 2003. We will attempt to sublet any leases which do not expire in fiscal 2003. SUBCONTRACTORS; STRATEGIC ALLIANCES We believe that low cost manufacturing will be crucial to our long-term success. We presently use subcontractors for finishing lenses, including the collimator lens, and intend to continue to do so. We have the internal capability to finish prototype lenses and small volume orders. We have qualified and licensed numerous finishers to fabricate lenses, several of which are located in Asia. Qualification of additional offshore finishers to augment our strategy of maximizing cost efficiencies will continue to be a top manufacturing priority while the assembly and alignment of collimators will be done with automation at our manufacturing facilities. We entered into a 1997 strategic alliance with Hikari as a possible second source for GRADIUM glass production, as a possible source for high-volume blank production, to increase the presence of GRADIUM glass in Hikari's established Asian markets and to develop a continuous flow manufacturing process, currently used by Hikari for high-end optical lenses. In February 2000, Hikari announced that they intended to spend $5 million to purchase equipment necessary to build out a second facility for GRADIUM glass materials and other products. During the fourth quarter of fiscal 2002 these old agreements were cancelled and a new licensing arrangement was executed, whereby Hikari will manufacture GRADIUM glass for LightPath as well as Hikari customers throughout Asia. We have taken steps to protect our proprietary methods of repeatable high quality manufacturing by patent disclosures and internal trade secret controls. 15
LightPath Technologies, Inc. - Form 10K, June 30, 2002 SUPPLIERS Base optical materials, used in both optoelectronic and traditional optic products, are manufactured and supplied by a number of major manufacturers, such as Hikari, Schott Glaswerke and Hoya Corporation. Optical fiber and collimator housings are manufactured and supplied by a number of major manufacturers, such as Corning. We believe that a satisfactory supply of production materials will continue to be available at reasonable prices, although there can be no assurance in this regard. ISOLATORS Our isolator manufacturing lines are housed in approximately 5,000 square-feet of clean room space (certified Class 10,000) within the Walnut, California facility. The manufacturing lab contains dual beam laser welding stations, sub-micron alignment engines, robotic assembly stations, automated dispensing systems and precision dicing equipment. A tool and die operation, including EDM capability, is located in a separate shop and assembly area. The shop supports product design and automation efforts including metrology and inspection, part prototype fabrication for proof of concept, and machine building from prototype to production line. The primary benefits of our approach to manufacturing are (i) reduced costs as a result of higher yields and throughput, and (ii) product consistency as a result of eliminating manual labor. We believe we are the only manufacturer of free-space isolators currently using automated manufacturing. The Walnut facility has similar product qualification processes and equipment as the Albuquerque facility. SUPPLIERS We currently purchase a few key materials from single or limited sources. The polarizing glass used in our isolator products is supplied primarily by Corning and is marketed as Polarcor(TM). To date, we have been able to acquire an ample supply of polarizing glass. Garnet and other crystals used in our isolator products are provided by a number of vendors, including Casix, Sumitomo and TDK. Available quantities and adequate pricing of garnet has not proven problematic. We believe that a satisfactory supply of production materials will continue to be available at competitive prices, although there can be no assurance in this regard. We rely on local and regional vendors for component materials such as housings, fixtures and magnets. In addition, certain products require external processing such as brazing and metalization. To date, we have found a suitable number of qualified vendors in the Southern California market. MOLDED ASPHERES Our manufacturing lines for molded aspheres are housed in a new 41,000 square feet, production facility in Orlando, Florida which we moved into in the second quarter of fiscal 2002. This space was designed to accommodate current and future growth needs in Orlando. The new facility features extensive clean room operations, expanded tooling and coating work areas, and expanded areas for the production of micro-lens arrays and passive integrated assemblies. The new production facility will also emphasize automation in all phases of manufacturing. The new facility is expected to provide Geltech with the platform to significantly reduce costs through process improvements and automation, and provide the capacity needed for the fulfillment of high volume opportunities. The facility includes extensive research and development labs featuring state-of-the-art equipment and metrology. The manufacturing plants include lens pressing equipment, high precision mold production equipment, advanced metrology and inspection equipment and coating facilities. The Orlando plant features an extensive tooling and machine shop, developed for the fabrication of proprietary press workstations, and advanced mold development. During the fourth quarter of fiscal 2002, the Company announced plans to relocate the collimator and GRADIUM glass manufacturing operations from Albuquerque to Orlando by September 30, 2002. 16
LightPath Technologies, Inc. - Form 10K, June 30, 2002 SUPPLIERS We utilize a number of glass compositions for the manufacture of our molded glass aspheres and lens array products. One such glass is a proprietary glass composition licensed from and manufactured by Corning Inc. Corning Inc. is currently the sole source for this glass composition. We believe that a satisfactory supply of production materials will continue to be available at competitive prices, although there can be no assurance in this regard. Suppliers and second sources of other glass compositions are readily available. We also rely on local and regional vendors for component materials and services such as chemicals and inert gases, specialty ceramics, UV coatings and other specialty coatings. To date, we have found a suitable number of qualified vendors for these materials and services. PATENTS AND OTHER PROPRIETARY INTELLECTUAL PROPERTY Our policy is to protect our technology by, among other things, patents, trade secret protection, trademarks and copyrights. As of June 2002, LightPath and its subsidiaries have fifty-six issued U.S. patents, thirty-three foreign patents and have filed numerous applications for additional U.S. and foreign patents. Patents have been issued, and/or patent applications have been filed, in the areas of glass composition, glass molding, gradient geometries, production processes, sol-gel processing, product design, fiber attachment, robotic assembly and micro-fabrication. The first of our issued patents expires in 2006; the remainder expire at various times through 2019. Patent applications corresponding to our U.S. applications have been filed in the patent offices in Europe and Japan pursuant to the Patent Cooperation Treaty. Under the Patent Cooperation Treaty, a patent applicant may file one patent application and have it acknowledged as an accepted filing in as many member nations to the Patent Cooperation Treaty as the applicant elects. In addition to patent protection, certain process inventions, lens designs and innovations are retained as trade secrets. A key feature of GRADIUM glass is that, once fabricated, it does not reveal our formula upon inspection and, to our knowledge, cannot be reverse-engineered. LightPath(R) is now registered as a service mark in the United States and GRADIUM (R) is a registered trademark. Geltech's StableSil (R) is a registered trademark. There can be no assurance that any issued patents owned by us will afford adequate protection to us or not be challenged, invalidated, infringed or circumvented, or that patent applications relating to our products will result in patents being issued. There can be no assurance that any rights granted to us for technologies that we may license in the future will provide competitive advantages to us. There can be no assurance that patents owned or licensed by us that are issued in one jurisdiction will also be issued in any other jurisdiction. Furthermore, there can be no assurance that the validity of any of the patents would be upheld if challenged by others in litigation or that our activities would not infringe upon patents owned by others. Further, there can be no assurance that others have not independently developed or will not independently develop and patent similar or superior products and technologies, duplicate any of our products or technologies or design around our patents. There can be no assurance that patents issued to others will not adversely affect the development or commercialization of our products or technologies. We do not have an insurance policy for patent infringement liability coverage for costs or damages relating to claims of infringement. We could incur substantial costs in defending suits brought against us, or any of our licensees, or in suits in which we may assert that our patent or patents provide us with rights against others or in suits contesting the validity of a patent. Any such proceedings could be protracted. In addition, there can be no assurance that we would be successful in defending our patent rights in any future infringement action. If the outcome of any such litigation is adverse to our interests, our business may be materially adversely affected. 17
LightPath Technologies, Inc. - Form 10K, June 30, 2002 We do not believe that any of our products or processes infringe any U.S. or foreign patent rights of any other party. There can be no assurance, however, that our products or processes do not infringe on a United States or foreign patent, or patent application. Patent applications in the United States are maintained in secrecy until the patent is issued. We could incur substantial costs in defending ourself in infringement litigation brought by others, or in prosecuting infringement claims against third parties. An adverse party claiming patent or copyright infringement might assert claims for substantial damages or seek to obtain an injunction or other equitable relief, which could effectively block the ability for us to make, use, distribute and sell products. We also rely on trade secrets and proprietary know-how. We seek to protect our trade secrets and proprietary know-how, in part, by confidentiality agreements with our employees, consultants and customers. However, there can be no assurance that our confidentiality agreements will not be breached or that we would have adequate remedies for any breach. Some of the confidentiality agreements that we rely upon will expire in the next few years. There can be no assurance that others will not independently develop technology or processes substantially equivalent to or better than our technology or processes, or that our trade secrets will not otherwise become disclosed to or independently discovered by our competitors. ENVIRONMENTAL AND GOVERNMENT REGULATION Currently, emissions and waste from our present manufacturing processes are at such low levels that no special environmental permits or licenses are required. In the future, we may need to obtain special permits for disposal of increased waste by-products. The glass materials we utilize contain lead and other toxic elements in a stabilized molecular form. However, the high temperature diffusion process results in low-level emissions of such elements in gaseous form. If production reaches a certain level, we believe that we will be able to efficiently recycle certain of our raw material waste, thereby reducing disposal levels. We believe that we are presently in compliance with all material federal, state and local laws and regulations governing our operations and have obtained all material licenses and permits necessary for the operation of our business. Horizon uses a low-emission spray booth for the application of certain solvents and adhesives in its manufacturing process. Horizon maintains a permit for its spray booth through its local air quality management district and believes it is in full compliance with all applicable regulations. Geltech utilizes certain chemicals and solvents in its manufacturing process. Geltech maintains all necessary permits and believes it is in full compliance with all applicable regulations There are currently no federal, state or local regulations that restrict the manufacturing and distribution of our telecom products or other products. Certain end-user applications will require that the complete optical systems receive government approval, such as U.S. Trade and Drug Administration approval for use in endoscopy. In these cases, we will generally be involved on a secondary level and the OEM customer will be responsible for the license and approval process. RESEARCH AND DEVELOPMENT From August 1985 through June 1996, we were engaged in basic research and development that resulted in the discovery of GRADIUM glass and the proprietary processes for fabricating GRADIUM glass lenses. This research included theoretical development of the mathematical formulas for accurately defining GRADIUM glass, development and refinement of the prescribable, repeatable fabrication process, and development of the software modeling tools and metrology. We shipped our first GRADIUM glass products in May 1994. Our initial flint product line is lead-based. The flint GRADIUM glass family has been expanded over the years, to include crown glasses, titania silicate glasses and polymer materials. We intend to continue fundamental materials research, process and production optimization and the development of new glass compositions to create different "families" and geometries of GRADIUM glass materials to be offered to customers. "Families" of glass are various base glass compounds comprised of different elements. Variation of refractive index can be accomplished by using different elements in glass. 18
LightPath Technologies, Inc. - Form 10K, June 30, 2002 Further development is necessary to produce GRADIUM glass materials for high performance, white light applications (such as high performance microscopes and other products where sensitive color discrimination is critical). We will continue to upgrade the material design modeling software and optical design tools to facilitate product design. Working with DR Technologies, we successfully completed the development of GRADIUM polymer and acrylic materials in fiscal 1998. These materials may be used for solar concentrators used in space applications and for conformal optics (optics that conform to design specifications of aircraft and missiles) where more aerodynamic shapes are required. The majority of present development efforts are focused on the standard collimator assembly and integrated modules. Our acquired businesses continue their efforts in the area of isolators and next generation optical subassemblies, waveguides, lens arrays and sub-assembly technologies. We incurred expenditures for research and development during the years ended June 30, 2002, 2001 and 2000 of $7,095,649, $7,089,931 and $1,449,347, respectively. In addition, during fiscal 2001and fiscal 2000, $9.1 million and $4.2 million of in-process research and developments costs were expensed related to the acquisitions of Geltech and Horizon, respectively. We currently plan to expend approximately $3.6 million for research and development during fiscal 2003, which could vary depending upon the progress of projects currently in the proof of concept stage. EMPLOYEES We currently have 167 full-time employees in California, New Mexico, Texas, Florida and New Jersey. We expect to terminate approximately 67 employees in the first quarter of fiscal 2003 as part of the consolidation we announced in June 2002. Any employee additions or terminations over the next twelve months, primarily consisting of manufacturing personnel, will be dependent upon the actual sales levels realized during fiscal 2003. Twenty-two of our present employees are engaged in management, administrative and clerical functions, twenty-one in research and product development, nineteen in equipment automation, eleven in sales and marketing and ninety-four are in production and metrology. We intend to continue our current practice of utilizing outside consultants, where appropriate, in addition to hiring full-time personnel. None of our employees are represented by labor unions. 19
LightPath Technologies, Inc. - Form 10K, June 30, 2002 RISK FACTORS THE FOLLOWING RISK FACTORS SHOULD BE READ BY YOU TOGETHER WITH THE MORE DETAILED INFORMATION INCLUDED AT OTHER SECTIONS OF THE FORM 10-K. OUR FISCAL YEAR ENDS ON JUNE 30 AND REFERENCES TO YEARS IN THE FORM 10K REFER TO OUR FISCAL YEAR ENDED AS OF JUNE 30 OF THE REFERENCED CALENDAR YEAR. RISKS RELATED TO OUR FINANCIAL RESULTS WE HAVE A HISTORY OF LOSSES AND MAY CONTINUE TO INCUR LOSSES. We have incurred net losses of $50.7 million and $60.8 million for the fiscal years ended June 30, 2002 and 2001, respectively and we had an accumulated deficit of $156 million as of June 30, 2002 . During our fiscal year ending June 30, 2002 we experienced reduced revenues due to the unanticipated widespread softening of the U.S. economy and the telecommunications industry in particular. We experienced order cancellations and extensions of product shipment dates by our customers who adjusted their inventory levels in response to slower industry growth. These cancellations and extensions adversely impacted our revenues and could result in higher inventory levels than required to support our sales levels. These conditions may significantly delay, and could prevent, our ability to achieve profitability. We expect to continue to incur significant product development, sales and marketing and administrative expenses, and, as a result, we will need to generate increased revenues to achieve profitability. Even if we achieve profitability, given the competition in, and the evolving nature of, the optical networking market, we may not be able to sustain or increase profitability on a quarterly or annual basis. As a result, we will need to generate significantly higher revenues while containing costs and operating expenses if we are to achieve profitability. WE FACE ORDER CANCELLATIONS AND EXTENSIONS OF PRODUCT SHIPMENT DATES BY SOME OF OUR CUSTOMERS. Our sales are generally made pursuant to purchase orders that are subject to cancellation, modification or rescheduling without significant penalties to our customers. We have recently experienced order cancellations and extensions of product shipment dates by some of our customers. If these or other current customers stop placing orders, or further reduce orders, we may not be able to replace these orders with orders from new customers. The majority of our current customers do not have any minimum purchase obligations, and they may stop placing orders with us at any time, regardless of any forecast they may have previously provided. The loss of any of our key customers or further reductions in sales to these customers would reduce our net revenues from the levels currently expected. WE HAVE ANNOUNCED PLANS TO CONSOLIDATE FACILITIES In June 2002 we announced plans to consolidate our collimator and other lens production at our Orlando facility and close our Albuquerque facilities. The widespread softening of the U.S. economy and the telecommunications industry in particular has required us to lower our manufacturing and administrative costs and eliminate underutilized capacity. There can be no assurances that we will be able to retain the key employees due to relocation. We have limited experience with consolidating businesses within our organization. Our efforts may not be successful and may result in unanticipated operational problems, expenses and liabilities, and our business may suffer as a result of diversion of management attention due to the consolidation. If we are unable to consolidate these product lines within our organization in a timely and effective manner, our business and our operating results will be adversely affected. WE HAVE ONLY RECENTLY BEGUN SELLING PRODUCTS TO THE TELECOMMUNICATIONS INDUSTRY. We have only generated revenues from the sale of products to the telecommunications industry since fiscal 1999. Through June 1996, our primary activities were basic research and development of glass material properties. Moreover, our ability to accurately forecast revenues is impacted by weaknesses and uncertainties regarding overall demand within the telecommunications industry, inventory levels within the industry, sudden order reductions and cancellations by customers, lower backlog of customer orders, and potential pricing pressures that may arise from supply/demand conditions within the industry. Because we have only recently begun to sell these products, we have in 20
LightPath Technologies, Inc. - Form 10K, June 30, 2002 the past and may in the future be unable to accurately forecast our revenues from sales of these products, and we have limited meaningful historical financial data upon which to plan future operating expenses. Many of our expenses are fixed in the short term, and we may not be able to quickly reduce spending if our revenue is lower than we project. Major new product introductions will also result in increased operating expenses in advance of generating revenues, if any. Therefore, net losses in a given quarter could be greater than expected. We may not be able to address the risks associated with our limited operating history in an emerging market and our business strategy may not be sustainable. Failure to accurately forecast our revenues and future operating expenses could cause quarterly fluctuations in our net revenues and may result in volatility or a decline in our stock price. OUR PRODUCTS ARE AT AN EARLY STAGE OF DEVELOPMENT AND MAY NOT ACHIEVE MARKET ACCEPTANCE. Many of our telecommunications products are still in the introductory phase, and our current line of GRADIUM products, and other traditional optics, have not generated sufficient revenues to sustain operations. While we believe our existing products are commercially viable, we anticipate the need to educate the optical components market in order to generate market demand and market feedback may require us to further refine these products. Development of additional product lines will require significant further research, development, testing and marketing prior to commercialization. There can be no assurance that any proposed products will be successfully developed, demonstrate desirable optical performance, be capable of being produced in commercial quantities at reasonable costs or be successfully marketed. OUR PRODUCTS HAVE NOT BEEN DEMONSTRATED TO BE COMMERCIALLY SUCCESSFUL. Our collimator products have not yet achieved broad commercial acceptance, our isolator sales first entered the commercial production phase in April 2000 with one significant customer and our molded aspheres telecom applications are new. Although we are engaged in negotiations and discussions with potential customers, there can be no assurance that any such discussions will lead to development of commercially viable products or significant revenues, if any, or that any products currently existing or to be developed in the future will attain sufficient market acceptance to generate significant revenues. We must also satisfy industry-standard Telcordia testing on telecommunication products to meet customer requirements, as well as satisfy prospective customers that we will be able to meet their demand for quantities of products, since we may be the sole supplier and licensor. We do not have experience as a manufacturer for all our product lines and have limited financial resources. We may be unable to accomplish any one or more of the foregoing to the extent necessary to develop market acceptance of our products. Although our traditional optics products have been accepted commercially, the benefits of the GRADIUM glass line are not widely known. In order to persuade potential customers to purchase GRADIUM products, we will need to overcome industry resistance to, and suspicion of, gradient lens technology that has resulted from previous failed attempts by various researchers and manufacturers unrelated to us to develop a repeatable, consistent process for producing lenses with variable refractive indices. Prospective customers will need to make substantial expenditures in order to redesign products to incorporate GRADIUM lenses. There can be no assurances that potential customers will view the benefits of our products as sufficient to warrant such design expenditures. WE DEPEND ON A FEW KEY CUSTOMERS. In the fiscal year ended June 30, 2002, Finisar Corp. accounted for 24% of our net revenue. In the fiscal year ended June 30, 2001 Agere Systems, Inc., Corning Inc. and JDS Uniphase accounted for 44%, 7.4%, and 5.2% of our net revenues, respectively. We anticipate that our operating results will continue to depend on sales to a relatively small number of significant customers. The loss of any of these customers, or a significant reduction in sales to any such customers, could adversely affect our revenues. 21
LightPath Technologies, Inc. - Form 10K, June 30, 2002 RISKS RELATED TO THE OPTICAL NETWORKING INDUSTRY SALES OF OUR PRODUCTS DEPENDS UPON DEPLOYMENT OF OPTICAL NETWORKS TO SATISFY INCREASED BANDWIDTH REQUIREMENTS. Our future success depends on the continuing increase in the amount of data transmitted over communications networks, or bandwidth, and the growth of optical networks to meet the increased demand for bandwidth. If the Internet does not continue to expand as a widespread communications medium and commercial marketplace, the need for significantly increased bandwidth across networks and the market for optical networking products may not continue to develop. Future demand for our products is uncertain and will depend to a great degree on the continued growth and upgrading of optical networks. If the growth and upgrading of optical networks does not continue, sales of our products may decline, which would adversely affect our revenues. THE OPTICAL NETWORKING MARKET IS NEW AND UNPREDICTABLE AND CHARACTERIZED BY RAPID TECHNOLOGICAL CHANGES AND EVOLVING STANDARDS. The optical networking market is relatively new and is characterized by rapid technological change, frequent new product introductions, changes in customer requirements and evolving industry standards. Because this market is relatively new, it is difficult to predict its potential size or future growth rate. Widespread adoption of optical networks is critical to our future success. Potential end-user customers who have invested substantial resources in their existing copper lines or other systems may be reluctant or slow to adopt a new approach, like optical networks. Our success in generating revenues in this emerging market will depend on, among other things: - maintaining and enhancing our relationships with our customers; - the education of potential end-user customers and network service providers about the benefits of optical networks; and - our ability to accurately predict and develop our products to meet industry standards. If we fail to address changing market conditions, the sales of our products may decline, which would adversely impact our revenues. WE MUST INCREASE OUR SALES VOLUMES, REDUCE OUR COSTS OR INTRODUCE HIGHER MARGIN PRODUCTS TO OFFSET ANTICIPATED REDUCTIONS IN THE AVERAGE SELLING PRICES OF OUR PRODUCTS. We have experienced decreases in the average selling prices of some of our products, including most of our passive component products. We anticipate that as products in the optical component and module market become more commoditized, the average selling prices of our products may decrease in response to competitive pricing pressures, new product introductions by us, our competitors or other factors. The optical component and module market is experiencing extreme volatility as a result of lower product demand, which will make it difficult for us to increase our sales volume. If we are unable to offset the anticipated decrease in our average selling prices by increasing our sales volumes or product mix, our net revenues and gross margins will decline. In addition, to maintain or improve our gross margins, we must continue to reduce the manufacturing cost of our products, and we must develop and introduce new products and product enhancements with higher margins. If we cannot maintain or improve our gross margins, our financial position may be harmed and our stock price may decline. RISKS RELATED TO OUR BUSINESS OUR FUTURE SUCCESS DEPENDS ON OUR ABILITY TO DEVELOP AND SUCCESSFULLY INTRODUCE NEW AND ENHANCED PRODUCTS THAT MEET THE NEEDS OF OUR CUSTOMERS. Our future success depends on our ability to anticipate our customers' needs and develop products that address those needs. Introduction of new products and product enhancements will require that we effectively transfer production processes from research and development to manufacturing and coordinate our efforts with the efforts of our suppliers to rapidly achieve efficient volume production. If we fail to effectively transfer production processes, develop product enhancements or introduce new products that meet the needs of our customers as scheduled, our net revenues may decline. 22
LightPath Technologies, Inc. - Form 10K, June 30, 2002 IF WE ARE UNABLE TO SUCCESSFULLY INTEGRATE ACQUIRED COMPANIES, OUR BUSINESS MAY BE ADVERSELY AFFECTED. During the calendar year ended December 31, 2000, we acquired both Horizon and Geltech in separate transactions. The efficient integration of these businesses into our organization will be important to our success. If our integration efforts prove to be unsuccessful, our business will suffer. We have spent, and expect to continue to spend, significant financial, management and other resources to integrate these businesses into our organization. Our headcount increased substantially as a result of the acquisitions, and these new employees must be integrated with our existing employees. Both Horizon and Geltech were privately held and may require substantial investments in operational and financial infrastructure to ensure that their systems and processes adequately support operating as a publicly held organization. Each of these organizations will also need additional investments in manufacturing infrastructure in order to develop new products and ramp up production volumes. There can be no assurances that we will be able to retain the key employees of Horizon and Geltech. We have limited experience with integrating acquired businesses into our organization. Our integration efforts may not be successful and may result in unanticipated operations problems, expenses and liabilities and the diversion of management attention. If we are unable to integrate these companies into our organization in a timely and effective manner, our business and our operating results will be adversely affected. We anticipate that in the future, as part of our business strategy, we may continue to make strategic acquisitions of complementary companies, products or technologies. In the event of any further future acquisitions, we could: - issue stock that would dilute our current stockholders' percentage ownership; - incur debt; - assume liabilities; or - incur expenses related to in-process research and development, and amortization of intangible assets. Any future acquisitions also could involve numerous risks, including: - problems associated with combining the acquired operations, technologies or products; - unanticipated costs or liabilities; - diversion of management's attention from our core business; - adverse effects on existing business relationships with suppliers and customers; - risks associated with entering markets in which we have no or limited prior experience; and - potential loss of key employees, particularly those of the acquired businesses. We cannot assure that we will be able to successfully integrate any businesses, products, technologies or personnel that we might acquire in the future, which may harm our business. COMPETITION MAY INCREASE, WHICH COULD REDUCE OUR SALES AND GROSS MARGINS, OR CAUSE US TO LOSE MARKET SHARE. Competition in the optical component and module market in which we compete is intense. Many of our competitors are large public companies that have longer operating histories and significantly greater financial, technical, marketing and other resources than we have. As a result, these competitors are able to devote greater resources than we can to the development, promotion, sale and support of their products. In addition, the market capitalization and cash reserves of several of our competitors are much larger than ours, and, as a result, these competitors are much better positioned than we are to acquire other companies in order to gain new technologies or products that may displace our product lines. Such acquisitions could give our competitors a strategic advantage. For example, if our competitors acquire any of our significant customers, these customers may reduce the amount of products they purchase from us. Alternatively, some of our competitors may spin-out new companies in the optical component and module market. These companies may compete more aggressively than their former parent companies due to their greater dependence on our markets. In addition, many of our potential competitors have significantly more established sales and customer support organizations, much greater name recognition, more extensive customer bases, more developed 23
LightPath Technologies, Inc. - Form 10K, June 30, 2002 distribution channels and broader product offerings than we have. These companies can leverage their customer bases and broader product offerings and adopt aggressive pricing policies to gain market share. Additional competitors may enter the market, and we are likely to compete with new companies in the future. We expect to encounter potential customers that, due to existing relationships with our competitors, are committed to the products offered by these competitors. As a result of the foregoing factors, we expect that competitive pressures may result in price reductions, reduced margins and loss of market share. We compete with manufacturers of conventional spherical lens products and aspherical lens products, producers of optical quality glass and other developers of gradient lens technology as well as telecom product manufacturers. In both the optical lens and telecommunications components markets, we are competing against, among others, established international industry giants. Many of these companies also are primary customers for optical and telecommunication components, and therefore have significant control over certain markets for our products. We are also aware of other companies that are attempting to develop radial gradient lens technology. There may also be others of which we are not aware that are attempting to develop axial gradient lens technology similar to our technology. There can be no assurance that existing or new competitors will not develop technologies that are superior to or more commercially acceptable than our existing and planned technologies and products. OUR PRODUCTS MAY CONTAIN UNKNOWN DEFECTS. Some of our products are designed to be deployed in large and complex optical networks. Because of the nature of these products, they can only be fully tested for reliability when deployed in networks for long periods of time. Our fiber optic products may contain undetected defects when first introduced or as new versions are released, and our customers may discover defects in our products only after they have been fully deployed and operated under peak stress conditions. In addition, our products often are combined with products from other vendors. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to fix defects or other problems, we could experience, among other things: - loss of customers; - damage to our brand reputation; - failure to attract new customers or achieve market acceptance; - diversion of development and engineering resources; and - legal actions by our customers or third parties. The occurrence of any one or more of the foregoing factors could cause our net revenues to decline or otherwise have an adverse effect on our business. WE FACE PRODUCT LIABILITY RISKS. The sale of our optical products will involve the inherent risk of product liability claims by others. We do not currently maintain product liability insurance coverage. Product liability insurance is expensive, subject to various coverage exclusions and may not be obtainable on terms acceptable to us if we decide to procure such insurance in the future. Moreover, the amount and scope of any coverage may be inadequate to protect us in the event that a product liability claim is successfully asserted. OUR PRODUCTS HAVE LONG AND VARIABLE SALES CYCLES. The timing of our revenue is difficult to predict because of the length and variability of the sales and implementation cycles for our products. We do not recognize revenue until a product has been shipped to a customer, all significant vendor obligations have been performed and collection is considered probable. Customers often view the purchase of our products as a significant and strategic decision. As a result, customers typically expend significant effort in evaluating, testing and qualifying our products and our manufacturing process. This customer evaluation and qualification process frequently results in a lengthy initial sales cycle (often one year or longer). While our customers are evaluating our products and before they place an order with us, we may incur substantial sales and marketing and research and development expenses to customize our products to the customer's needs. We may also expend significant management efforts, increase manufacturing capacity and order long lead-time components or materials prior to receiving an order. Even after this evaluation 24
LightPath Technologies, Inc. - Form 10K, June 30, 2002 process, a potential customer may not purchase our products. Because of the evolving nature of the optical component and module market, we cannot predict the length of these sales and development cycles. The recent slowdown in the U.S. economy has resulted in order cancellations and extensions of product shipment dates by our customers. These long sales cycles, coupled with the uncertain affects of the slowdown in the U.S. economy, may cause our revenues and operating results to vary significantly and unexpectedly from quarter to quarter, which could continue to cause volatility in our stock price. WE DEPEND ON KEY PERSONNEL TO MANAGE OUR BUSINESS EFFECTIVELY. Our future success depends upon the continued services of our executive officers and other key engineering, sales, marketing, manufacturing and support personnel. Our inability to retain or attract key employees could have a material adverse effect on our business and results of operations. Our operations depend, to a great extent, upon the efforts of our senior officers. We also depend upon our ability to attract additional members to our management and operations teams to support our expansion strategy. The loss of any of these key employees would adversely affect our business. We had approximately 167 full-time employees on June 30, 2002. Although we have reduced our workforce by approximately 133 people during the last fiscal year, we expect to continue to hire selectively in the manufacturing, engineering, sales and marketing and administrative functions to the extent consistent with our business levels. Our ability to continue to attract and retain highly skilled personnel will be a critical factor in determining whether we will be successful. Competition for highly skilled personnel is intense. We may not be successful in attracting, assimilating or retaining qualified personnel to fulfill our current or future needs, which could adversely impact our ability to develop and sell our products. WE HAVE LIMITED PRODUCT OFFERINGS, SOME OF WHICH ARE CURRENTLY EXPERIENCING A DECLINE IN DEMAND. We derive a substantial portion of our net revenues from a limited number of products. Specifically, in the fiscal year ended June 30, 2002, we derived approximately 35%, 14.5%, 17.2% and 33.3% of our net revenues from our isolators, collimators, molded aspheric lenses and traditional optics products, respectively. We expect that net revenues from a limited number of products will continue to account for a substantial portion of our total net revenues. Demand for these and other optical component and module products has declined as a result of the recent slowdown in the U.S. economy and we continue to experience order cancellations and delays in product shipment dates by our customers. Aside from the current slowdown in the telecommunications industry, continued and widespread market acceptance of our products is critical to our future success. We cannot assure you that, once the telecommunication industry conditions improve, our current products will achieve market acceptance at the rate at which we expect, or at all, which could adversely affect our results of operations. WE MUST ACCURATELY TIME OUR MANUFACTURING CAPACITY WITH THE DEMAND FOR OUR PRODUCTS. We face a challenge in accurately timing the installation of our manufacturing capacity with the demand for our products. Throughout fiscal 2001 we expanded our manufacturing capacity through the expansion of facilities and the hiring of employees and through the acquisition of Geltech. At June 30, 2002, we had a total of 167 full-time employees, down from 300 employees at June 30, 2001. As a result of the recent, and sudden, order cancellations and extensions of product shipment dates by our customers, we are slowing the rate of production of some of our products. We have announced that we intend to terminate 67 additional employees by December 2002 as we consolidate our facilities. We also may curtail efforts to install new equipment in our facilities until market conditions improve. We believe this approach will allow us to quickly ramp up production if unit demand for our products merits. However, if demand for our products continues to decline, we may have more employees and facility space than necessary to deliver our products, which would adversely impact our ability to achieve profitability, and could require us to further reduce the size of our operations. Despite our recent announcement of plans to consolidate our business, we still face challenges as a result of our rapid expansion over the past few fiscal years. The increase in employees as a result of our acquisitions and the growth in our operations, combined with the challenges of managing geographically-dispersed operations, have placed, and will continue to place, a significant strain on our management systems and resources. We expect that we 25
LightPath Technologies, Inc. - Form 10K, June 30, 2002 will need to continue to improve our financial and managerial controls, reporting systems and procedures and continue to expand, train and manage our work force. The failure to effectively manage our recent growth and to accurately time any future growth with market demand for our products could adversely impact our ability to manufacture and sell our products, which could reduce our revenues. WE MUST EXPAND OUR SALES ORGANIZATION. The sale of our products requires long and involved efforts targeted at several key departments within our prospective customers' organizations. Sales of our products require the prolonged efforts of executive personnel and specialized systems and applications engineers working together with a small number of dedicated salespersons. Currently, our sales organization is limited. We will need to grow our sales force in order to increase market awareness and sales of our products. Competition for these individuals is intense, and we might not be able to hire the kind and number of sales personnel and applications engineers we need. If we are unable to expand our sales operations, we may not be able to increase market awareness or sales of our products, which would prevent us from increasing our revenues. WE MUST MAKE SALES IN A FRAGMENTED MARKET. The markets for optical lenses and telecommunication components are highly fragmented. Consequently, we will need to identify and successfully target particular market segments in which we believe we will have the most success. These efforts will require a substantial, but unknown, amount of effort and resources. The fragmented nature of the optical products market may impede our ability to achieve commercial acceptance for our products. In addition, our success will depend in great part on our ability to develop and implement a successful marketing and sales program. There can be no assurance that any marketing and sales efforts undertaken by us will be successful or will result in any significant product sales. CURRENT AND PENDING LITIGATION MAY ADVERSELY IMPACT OPERATING RESULTS. On May 2, 2000, the Company commenced a class action lawsuit in the Chancery Court of Delaware, New Castle County (the "Court"). In this action, the Company sought a declaratory judgment with respect to the Company's right to redeem the Class E Common Stock on March 31, 2001 for $.0001 per share, the right of the holders of Class E Common Stock to vote at the Annual Meeting to be held on October 6, 2000, and for certification of the holders of Class E Common Stock as a class and the named defendants as its representatives. The final Settlement Agreement of this lawsuit requires the Company to pay $0.40 per Class E share. The Settlement Agreement permits Class E shareholders to elect not to participate in the settlement and thus will not be binding on any Class E shareholders who so elect. Approximately 12% of the former Class E shareholders elected not to participate in the settlement. Based on the above, the Company estimates the total cost of the Settlement Agreement at $1.5 million, which will be distributed during the first quarter of fiscal 2003. On or about June 9, 2000, a small group of holders of Class E Common Stock commenced an action in a state court in Texas (the "Texas Action"). Plaintiffs in the Texas Action have made various allegations regarding the circumstances surrounding the issuance of the Class E Common Stock and seek damages based upon those allegations. Management believes the allegations underlying the Texas litigation are without merit, however, we are unable to predict the outcome of this litigation at this time. The Company may from time to time become involved in other lawsuits and legal proceedings. Litigation is subject to inherent uncertainties, and an adverse result in any such matters that may arise from time to time may adversely impact our operating results or financial condition. Additionally, any litigation to which we are subject could require significant involvement of our senior management and may divert management's attention from our business and operations. WE FACE RISKS ASSOCIATED WITH INTERNATIONAL SALES. For the fiscal year ended June 30, 2002, approximately 14% of our net revenues were from sales to international customers. Our international sales will be limited if we cannot establish and/or maintain relationships with international distributors, establish foreign operations, expand international sales, and 26
LightPath Technologies, Inc. - Form 10K, June 30, 2002 develop relationships with international service providers. Additionally, our international sales may be adversely affected if international economies weaken. We are subject to risks including the following: - greater difficulty in accounts receivable collection and longer collection periods; - the impact of recessions in economies outside the United States; - unexpected changes in regulatory requirements; - sudden and unexpected reductions in demand in particular countries in response to exchange rate fluctuations; - certification requirements; - reduced protection for intellectual property rights in some countries; - potentially adverse tax consequences; and - political and economic instability. While we expect our international revenues to be denominated predominantly in U.S. dollars, in the future a portion of our international revenues and expenses may be denominated in foreign currencies. Accordingly, we could experience the risks of fluctuating currencies and the corresponding exchange rates. OUR STOCK PRICE IS VOLATILE. Broad market fluctuations or fluctuations in our operations may adversely affect the market price of our Common Stock. The market for our Common Stock is volatile. The trading price of our Common Stock has been and will continue to be subject to: - volatility in the trading markets generally and in our particular market segment; - limited trading of our common stock; - significant fluctuations in response to quarterly variations in operating results; - announcements regarding our business or the business of our customers or competitors; - changes in prices of our or our competitors' products and services; - changes in product mix; - changes in revenue and revenue growth rates; and - other events or factors. Statements or changes in opinions, ratings or earnings estimates made by brokerage firms or industry analysts relating to the markets in which we operate or expect to operate could have an adverse effect on the market price of our Common Stock. In addition, the stock market as a whole, as well as our particular market segment, have from time to time experienced extreme price and volume fluctuations which have particularly affected the market price for the securities of many companies and which often have been unrelated to the operating performance of these companies. DECLARATION OF DIVIDENDS TO SHAREHOLDERS IN THE FORESEEABLE FUTURE IS UNLIKELY. Our Board has never declared a dividend on our Common Stock. We do not anticipate paying dividends on the Common Stock in the foreseeable future. It is anticipated that earnings, if any, will be reinvested in the expansion of our business. POTENTIAL INFLUENCE OF EXISTING MANAGEMENT AND PRINCIPAL SHAREHOLDERS. If our management and shareholders act in concert, disposition of matters submitted to shareholders or the election of the entire Board of Directors may be hindered. We estimate that management and our principal shareholders beneficially owned approximately XX% of the aggregate Common Stock outstanding as of August 1, 2002. SOME PROVISIONS IN OUR CHARTER DOCUMENTS AND BYLAWS MAY HAVE ANTI-TAKEOVER EFFECTS. Our Certificate of Incorporation and Bylaws contain some provisions that could have the effect of discouraging a prospective acquirer from making a tender offer for our commons stock, or which may otherwise delay, defer or prevent a change in control. 27
LightPath Technologies, Inc. - Form 10K, June 30, 2002 OUR WARRANTS AND OPTIONS MAY AFFECT OUR FUTURE FINANCING. The existence of our outstanding options or warrants may adversely affect the terms on which we can obtain additional financing. As of June 30, 2002 there were outstanding: - warrants issued in private placement and other transactions pursuant to which 299,300 shares of Common Stock are issuable; and - outstanding options to purchase an aggregate of 4,518,412 shares of Common Stock. In addition, approximately 386,000 shares of Common Stock were reserved as of June 30, 2002 for issuance pursuant to future grants to be made under the Omnibus Incentive Plan and Directors Stock Incentive Plan. For the life of such options and warrants, the holders will have the opportunity to profit from a rise in the price of the underlying common stock, with a resulting dilution in the interest of other holders of common stock upon exercise or conversion. Further, the option and warrant holders can be expected to exercise their options and warrants at a time when we would, in all likelihood, be able to obtain additional capital by an offering of our unissued common stock on terms more favorable to us than those provided by such options or warrants. The eligibility of the foregoing shares to be sold to the public, whether pursuant to an effective registration statement, Rule 144 or an exemption from the registration requirements may have a material adverse effect on the market value and trading price of the Common Stock. WE HAVE AGREED TO CERTAIN LIMITATIONS UPON POTENTIAL LIABILITY OF OUR DIRECTORS. Our Certificate of Incorporation provides that directors will not be personally liable for monetary damages to LightPath or its shareholders for a breach of fiduciary duty as a director, subject to limited exceptions. Although such limitation of liability does not affect the availability of equitable remedies such as injunctive relief or rescission, the presence of these provisions in the Certificate of Incorporation could prevent the recovery of monetary damages by LightPath or its shareholders. WE MUST MAINTAIN COMPLIANCE WITH CERTAIN CRITERIA IN ORDER TO MAINTAIN LISTING OF OUR SHARES ON THE NASDAQ MARKET. The Company's Common Stock is currently traded on the Nasdaq National Market. Failure to meet the applicable quantitative and/or qualitative maintenance requirements of Nasdaq could result in our securities being delisted from the Nasdaq National Market. Our Common stock has recently traded below the $1.00 per share minimum price requirement, which would subject our Common Stock to delisting. If delisted from the Nasdaq National Market, our securities may be eligible for trading on the Nasdaq SmallCap Market, the OTC Bulletin Board or on other over-the-counter markets, although there can be no assurance that our securities will be eligible for trading on any alternative exchanges or markets. As a consequence of such delisting, an investor could find it more difficult to dispose of or to obtain accurate quotations as to the market value of our securities. Among other consequences, delisting from Nasdaq may cause a decline in the stock price and difficulty in obtaining future financing. RISK THAT FORWARD-LOOKING STATEMENTS MAY NOT COME TRUE. This report contains forward-looking statements that involve risks and uncertainties. We use words such as "believe", "expect," "anticipate," "plan" or similar words to identify forward-looking statements. Forward-looking statements are made based upon our belief as of the date that such statements are made. These forward-looking statements are based largely on our current expectations and are subject to a number of risks and uncertainties, many of which are beyond our control. You should not place undue reliance on these forward-looking statements, which speak as of the date of this report. Our actual results could differ materially from those anticipated in these forward-looking statements for many reasons, including the risks faced by us described above and elsewhere in this report. BUSINESS INTERRUPTIONS COULD ADVERSELY AFFECT OUR BUSINESS. Our operations are vulnerable to interruption by fire, earthquake, power loss, telecommunications failure and other events beyond our control. We do not have a detailed disaster recovery plan. We carry only a limited amount of business 28
LightPath Technologies, Inc. - Form 10K, June 30, 2002 interruption insurance, which may not sufficiently compensate us for losses that may occur. Our facilities may be subject to electrical blackouts as a consequence of a shortage of available electrical power. We currently do not have backup generators or alternate sources of power in the event of a blackout. If blackouts interrupt our power supply, we would be temporarily unable to continue operations at our affected facilities. Any losses or damages incurred by us as a result of blackouts or other business interruptions could impair our reputation, harm our ability to retain existing customers and to obtain new customers, and could result in lost revenue, any of which could substantially harm our business and results of operations. WE MAY NEED ADDITIONAL FUTURE FINANCING IN ORDER TO FUND OUR OPERATIONS AND PLANS FOR GROWTH. While the Company continues to take actions to reduce cash used from operations, there can be no assurance that the Company will generate sufficient revenues to fund its future operations and growth strategies. We may need to obtain additional financing in the future. We do not have any commitments from others to provide additional financing in the future and there can be no assurance that any such additional financing will be available if needed or, if available, will be on terms favorable to us. In the event such needed financing is not obtained, our operations will be materially adversely affected and we could be forced to cease or substantially reduce operations. Any additional equity financing may be dilutive to shareholders, and debt financings, if available, may involve restrictive covenants. OUR BUSINESS DEPENDS UPON THE EFFORTS OF THIRD PARTIES. Our strategy for the research, development and commercialization of certain products entails entering into various arrangements with corporate partners, OEMs, licensees and others in order to generate product sales, license fees, royalties and other funds adequate for product development. We may also rely on our collaborative partners to conduct research efforts, product testing and to manufacture and market certain of our products. Although we believe that parties to any such arrangements would have an economic motivation to succeed in performing their contractual responsibilities, the amount and timing of resources to be devoted to these activities may not be within our control. There can also be no assurance that we will be successful in establishing any such collaborative arrangements or that, if established, the parties to such arrangements will assist us in commercializing products. We have a non-exclusive agreement with a catalog company to distribute certain of our products. We have formalized relationships with eight foreign distributors to create markets for GRADIUM in their respective countries. There can be no assurance that these parties, or any future partners, will perform their obligations as expected or that any revenue will be derived from such arrangements. RISKS RELATED TO MANUFACTURING OUR PRODUCTS IF WE DO NOT ACCURATELY PROJECT DEMAND FOR OUR PRODUCTS, WE WILL HAVE EXCESS MANUFACTURING CAPACITY OR INSUFFICIENT MANUFACTURING CAPACITY. We currently manufacture substantially all of our products in our facilities located in Albuquerque, New Mexico, Walnut, California and Orlando, Florida. Based on the sudden change in U.S. economic conditions, we realized lower demand for our products in fiscal 2002 and we now expect only modest improvement in fiscal 2003. We intend to operate at lower production output during fiscal 2003 while retaining flexibility to meet demand if it should increase in the near future. Although we eliminated significant amounts of excess manufacturing capacity in fiscal 2002, we expect that the production slowdown may continue to negatively impact our gross margins during fiscal 2003. If we fail to accurately coordinate our production capacity and output with demand for our products in the future, we may have excess capacity or insufficient capacity, either of which may seriously harm our results of operations. Furthermore, we may experience delays, disruptions or quality control problems in our manufacturing operations, and, as a result, product shipments to our customers could be delayed beyond the revised shipment schedules requested by our customers, which would negatively impact our revenues, competitive position and reputation. For example, we have, in the past, experienced a disruption in the manufacture of some of our products due to changes in our manufacturing processes, which resulted in reduced manufacturing yields and delays in the shipment of our products. If we experience similar disruptions in the future, it 29
LightPath Technologies, Inc. - Form 10K, June 30, 2002 may result in lower yields or delays of our product shipments, which could adversely affect our revenues, gross margins and results of operations. OUR FAILURE TO ACCURATELY FORECAST MATERIAL REQUIREMENTS COULD CAUSE US TO INCUR ADDITIONAL COSTS, HAVE EXCESS INVENTORIES OR HAVE INSUFFICIENT MATERIALS TO BUILD OUR PRODUCTS. We use rolling forecasts based on anticipated product orders to determine our materials requirements. It is very important that we accurately predict both the demand for our products and the lead times required to obtain the necessary materials. Lead times for materials that we order vary significantly and depend on factors such as specific supplier requirements, the size of the order, contract terms and current market demand for the materials at a given time. If we overestimate our material requirements, we may have excess inventory, which would increase our costs. If we underestimate our material requirements, we may have inadequate inventory, which could interrupt our manufacturing and delay delivery of our products to our customers. Any of these occurrences would negatively impact our results of operations. Recent order cancellations and extension of product delivery dates by our customers have created a risk of material obsolescence. Additionally, in order to avoid excess material inventories we may incur cancellation charges associated with modifying existing purchase orders with our vendors. IF WE DO NOT ACHIEVE ACCEPTABLE MANUFACTURING YIELDS OR SUFFICIENT PRODUCT RELIABILITY, OUR ABILITY TO SHIP PRODUCTS TO OUR CUSTOMERS COULD BE DELAYED. The manufacture of our products involves complex and precise processes. Our manufacturing costs for several products are relatively fixed, and, thus, manufacturing yields are critical to our results of operations. Changes in our manufacturing processes or those of our suppliers, or the use of defective materials, could significantly reduce our manufacturing yields and product reliability. In addition, we may experience manufacturing delays and reduced manufacturing yields upon introducing new products to our manufacturing lines. We may experience lower than targeted product yields in the future which could adversely affect our operating results. IF OUR CUSTOMERS DO NOT QUALIFY OUR MANUFACTURING LINES FOR VOLUME SHIPMENTS, OUR OPERATING RESULTS COULD SUFFER. Generally, customers do not purchase our products, other than limited numbers of evaluation units, prior to qualification of the manufacturing line for volume production. Our existing manufacturing lines, as well as each new manufacturing line, must pass through varying levels of qualification with our customers. Customers may require that we be registered under international quality standards, such as ISO 9001. This customer qualification process determines whether our manufacturing lines meet the customers' quality, performance and reliability standards. If there are delays in qualification of our products, our customers may drop the product from a long-term supply program, which would result in significant lost revenue opportunity over the term of that program. WE DEPEND ON SINGLE OR LIMITED SOURCE SUPPLIERS FOR SOME OF THE KEY MATERIALS IN OUR PRODUCTS, WHICH MAKES US SUSCEPTIBLE TO SUPPLY SHORTAGES OR PRICE FLUCTUATIONS. We currently purchase several key materials used in the manufacture of our products from single or limited source suppliers. We may fail to obtain required materials in a timely manner in the future, or could experience further delays from evaluating and testing the products of these potential alternative suppliers. The recent softening of demand in the telecommunications industry could adversely impact the financial condition of our suppliers, many of whom have limited financial resources. We have in the past, and may in the future, be required to provide advance payments in order to secure key materials from financially limited suppliers. Financial or other difficulties faced by these suppliers could limit the availability of key components or materials. Additionally, financial difficulties could impair our ability to recover advances made to these suppliers. Any interruption or delay in the supply of any of these materials, or the inability to obtain these materials from alternate sources at acceptable prices and within a reasonable amount of time, would impair our ability to meet scheduled product deliveries to our customers and could cause customers to cancel orders. 30
LightPath Technologies, Inc. - Form 10K, June 30, 2002 RISKS RELATED TO OUR INTELLECTUAL PROPERTY WE MAY NOT BE ABLE TO PROTECT OUR PROPRIETARY TECHNOLOGY. We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. We cannot assure that our patent applications will be approved, that any patents that we may issue will protect our intellectual property or that third parties will not challenge any issued patents. Other parties may independently develop similar or competing technology or design around any patents that may be issued to us. WE MAY BECOME INVOLVED IN INTELLECTUAL PROPERTY DISPUTES AND LITIGATION. We anticipate, based on the size and sophistication of our competitors and the history of rapid technological advances in our industry, that several competitors may have patent applications in progress in the United States or in foreign countries that, if issued, could relate to products similar to ours. If such patents were to be issued, the patent holders or licensees may assert infringement claims against us or claim that we have violated other intellectual property rights. These claims and any resulting lawsuits, if successful, could subject us to significant liability for damages and invalidate our proprietary rights. The lawsuits, regardless of their merits, could be time-consuming and expensive to resolve and would divert management time and attention. Any potential intellectual property litigation could also force us to do one or more of the following, any of which could harm our business: - stop selling, incorporating or using our products that use the disputed intellectual property; - obtain from third parties a license to sell or use the disputed technology, which license may not be available on reasonable terms, or at all; or - redesign our products that use the disputed intellectual property. IF WE ARE UNABLE TO PROTECT AND ENFORCE OUR INTELLECTUAL PROPERTY RIGHTS, WE MAY BE UNABLE TO COMPETE EFFECTIVELY. We regard substantial elements of our technology as proprietary and attempt to protect them by relying on patent, trademark, service mark, copyright and trade secret laws. We also rely on confidentiality procedures and contractual provisions with our employees, consultants and corporate partners. The steps we take to protect our intellectual property may be inadequate, time consuming and expensive. Furthermore, despite our efforts, we may be unable to prevent third parties from infringing upon or misappropriating our intellectual property, which could harm our business. It may be necessary to litigate to enforce our patents, copyrights, and other intellectual property rights, to protect our trade secrets, to determine the validity of and scope of the proprietary rights of others or to defend against claims of infringement or invalidity. Such litigation can be time consuming, distracting to management, expensive and difficult to predict. Our failure to protect or enforce our intellectual property could have an adverse effect on our business, financial condition, prospects and results of operation. NECESSARY LICENSES OF THIRD-PARTY TECHNOLOGY MAY NOT BE AVAILABLE TO US OR MAY BE VERY EXPENSIVE. From time to time we may be required to license technology from third parties to develop new products or product enhancements. We can provide no assurance that third-party licenses will be available to us on commercially reasonable terms, or at all. The inability to obtain any third-party license required to develop new products and product enhancements could require us to obtain substitute technology of lower quality or performance standards or at greater cost, either of which could seriously harm our ability to manufacture and sell our products. 31
LightPath Technologies, Inc. - Form 10K, June 30, 2002 ITEM 2. DESCRIPTION OF PROPERTY We lease our headquarters, a manufacturing facility, a development office and an engineering office, in Albuquerque, New Mexico. The leases are generally five year leases with renewal options which currently are scheduled to expire from November 2002 through April 2005. The leased space houses all of our operations, including research, product design and development, production and all administrative operations. The 13,300, 17,000, 7,000 and 3,500 square foot facilities are located in a business and research park. We are obligated to make monthly rental payments of approximately $25,000. Due to our announced consolidation of New Mexico facilities to Florida, we will not renew two of the leases for 16,800 square feet which expire in November 2002 or the 17,000 square feet lease obligation which expires in March 2003. We will attempt to sublet the remaining 7,000 square feet which expires in December 2003. We leased an 11,500 square foot facility for office and research and development in Warren, New Jersey which we closed in fiscal 2002. We are obligated to make monthly rental payments of approximately $19,000 until May 2005. As of September 2002, the Company assigned this lease but we remain currently obligated to make monthly payments of approximately $2,500 until May 2005. We lease a 10,200 square foot facility in Walnut, California. The leased space houses all of the isolator operations, including office, manufacturing and development space. We are obligated to make monthly rental payments of approximately $7,000 until October 2003. During fiscal 2002, we expanded our Florida manufacturing site to 41,000 square feet facility which will contains a 9,000 square foot clean room. In addition, the collimator manufacturing and development group from New Mexico will be relocating to this facility during the first quarter of fiscal 2003. Lease terms on the new facility call for monthly rental payments of approximately $45,000 until October 2008. We will continue to try and sublease excess space to a third party until needed for expansion. ITEM 3. LEGAL PROCEEDINGS On May 2, 2000, the Company commenced a class action lawsuit in the Chancery Court of Delaware, New Castle County. The action seeks a declaratory judgment with respect to the Company's right to redeem the Class E Common Stock on March 31, 2001 for $.0001 per share, the right of the holders of Class E Common Stock to vote at the Annual Meeting to be held on October 6, 2000, and for certification of the holders of Class E Common Stock as a class and the named defendants as its representatives. The named defendants are Donald E. Lawson, former President, Chief Executive Officer and a Director of the Company, who owns an aggregate of 25,000 shares of Class E Common Stock, Louis G. Leeburg, a Director of the Company, who owns an aggregate of 7,272 shares of Class E Common Stock, and William Leeburg, who owns or controls an aggregate of 21,816 shares of Class E Common Stock. The Company entered into a proposed settlement of this lawsuit whereby the holders of Class E Common Stock could elect to receive either $.40 for each share of Class E Common Stock or a two year option to purchase one Class A Common Stock for each 100 shares of Class E Common Stock they hold. On January 8, 2001, the Delaware Chancery Court held a hearing on the proposed settlement and ruled on February 2, 2001, that holders of Class E Common Stock must be provided an opportunity to request exclusion from the settlement class. In December 2001, the Company agreed to proceed with the settlement to include a provision that each former E shareholder has the right to request exclusion from the settlement class. By June 30, 2002, the final settlement arrangements had been mailed to former holders of Class E Common Stock pursuant to which they would receive a settlement payment of $0.40 for each share. Approximately 3.6 million shares of Class E Common Stock will participate in the settlement whereas approximately 0.5 million shares opted out of the settlement. The Company has determined that it is probable that the settlement offer will occur and an estimated settlement charge of $1.5 million has been accrued as of June 30, 2002. On or about June 9, 2000, a small group of holders of Class E Common Stock (the "Texas Plaintiffs") commenced an action in a state court in Texas (the "Texas Action"). The Texas Plaintiffs allege that the actions of the Company, and 32
LightPath Technologies, Inc. - Form 10K, June 30, 2002 certain named individuals, leading up to and surrounding the Company's 1995 proxy statement constitute fraud, negligent misrepresentation, fraudulent inducement, breach of fiduciary duty and civil conspiracy. In general, the Texas Plaintiffs allege misrepresentations and omissions in connection with a request from the Company that its shareholders consent to a recapitalization, resulting in a 5.5 to 1 reverse stock split and the issuance of certain Class E Common Stock. The Texas Plaintiffs further allege that, as a result of the defendants' actions, they were induced to consent to the Company's recapitalization. The Company believes the allegations underlying the Texas Action have no basis in fact and that this lawsuit is without merit. The Company has retained counsel and is vigorously defending against these claims. The participants in the Texas Action will be provided the opportunity to accept the settlement discussed above. In addition, the Company participated in a mediation proceeding relating to the Texas Action on October 23, 2001. During fiscal 2002, the Company incurred and expensed legal fees associated with these claims of approximately $0.7 million, however, an insurance claim for the aggregate amount incurred in connection with the Texas Action in excess of applicable deductibles has been filed by the Company. During the first quarter of fiscal 2002, one of the insurance companies responsible for the claim, which had previously filed for reorganization, was declared insolvent. The Company is working with regulatory agencies to resolve and collect the monies due under this policy, although the Company currently considers any potential recovery under this policy as speculative. Accordingly, no claim for recovery is recorded as of June 30, 2002. On March 6, 2002, the Company commenced an action in a state court in New Mexico for various claims surrounding the now insolvent insurance carrier and the Company's former insurance broker. The Company is involved in various legal actions arising in the normal course of business. After taking into consideration legal counsel's evaluation of such actions, management is of the opinion that their outcome will not have a significant effect on the Company's financial position or results of operations. ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS. None. 33
LightPath Technologies, Inc. - Form 10K, June 30, 2002 PART II ITEM 5. MARKET FOR COMMON EQUITY AND RELATED STOCKHOLDER MATTERS. Our Class A Common Stock was quoted on the Nasdaq SmallCap Market system under the symbol "LPTHA" continuously from February 22, 1996 until July 12, 2000, when our Class A Common Stock moved to the Nasdaq National Market System under the symbol "LPTH". We estimate there were approximately 300 holders of record and approximately 19,000 beneficial holders of the Class A Common Stock on August 19, 2002. We have not paid cash dividends in the past and we do not intend to pay dividends in the foreseeable future. Declaration of dividends will be at the discretion of the Board of Directors. The following table sets forth the range of high and low bid prices for the Class A Common Stock for the periods indicated, as reported by Nasdaq, the principal system on which such securities are quoted. The quotation information below reflects inter-dealer prices, without retail mark-up, mark-down or commission, and may not represent actual transactions. Class A Fiscal Year Ended Common Stock High Low ------ ------ June 30, 2002 ------------- Quarter ended September 30, 2001 $ 8.39 $ 1.78 Quarter ended December 31, 2001 $ 4.50 $ 1.92 Quarter ended March 31, 2002 $ 3.98 $ 1.36 Quarter ended June 30, 2002 $ 2.11 $ 0.83 June 30, 2001 ------------- Quarter ended September 30, 2000 $57.94 $26.50 Quarter ended December 31, 2000 $48.00 $10.56 Quarter ended March 31, 2001 $27.44 $10.25 Quarter ended June 30, 2001 $19.00 $ 6.65 On July 28, 1999, we issued $1,000,000 aggregate principal amount of 6% Convertible Debentures (the "Debentures") due July 2002 and 427,350 attached Class I warrants. The Debentures are immediately convertible at any time prior to maturity into shares of Class A common stock, at a conversion price which is equal to the lower of 80% of the five day average closing bid price of the Company's Class A common stock at (i) the date of closing ($1.76) or (ii) the conversion date. Each Class I warrant entitles the holder to purchase one share of Class A common stock at $2.20 per share at any time through July 2004. In addition, the placement agent received 150,000 Class J warrants to purchases shares of the Company's Class A common stock at $2.20 per share at any time through July 2004. In addition, the investors of the Debentures are entitled to receive additional shares of Class A Common Stock in the event the Company issues additional shares of its Class A Common Stock or securities convertible into such class of securities at any time prior to July 28, 2001 under certain circumstances. The Debentures and attached Class I Warrants were sold for aggregate consideration of $1 million and resulted in net proceeds to the Company of approximately $893,000 after deducting the cash fee paid to the placement agent as well as the Company's legal and other associated costs. On November 2, 1999, we completed a private placement of 408 shares of its Series F Preferred Stock (the "Series F Stock"). The Series F Stock is convertible into shares of Class A common stock, at a conversion price which is equal to the lower of $5.00 or 80% of the five day average closing bid price of the Company's Class A common stock at the conversion date. Each share of Preferred Stock is convertible into Class A Common Stock at the option of holder, subject to certain volume limitations during the first 9 months. Holders of Series F Stock also received Class K warrants to acquire a total of 489,600 shares of Class A common stock in addition to the modification of terms on warrants outstanding from prior private placements. The Class K Warrants may be exercised at any time prior to expiration on November 2, 2002 at a price of $5.00 per share. Each of the investors in the Series F Stock has previously invested in our Series A, B and/or C Preferred Stock. In order to induce them to invest in the Series F Stock, in November 1999 we agreed to reduce the 34
LightPath Technologies, Inc. - Form 10K, June 30, 2002 applicable exercise prices and extend the applicable expiration dates of all outstanding warrants issued in connection with the sale of such Series A, B and C Preferred Stock. The gross proceeds received for the private placement of Series F Stock was $4,080,000, less placement fees and related expenses resulting in net proceeds of approximately $3,900,000. We also issued 125,000 Class L warrants to the placement agent, with terms identical to Class K Warrants. On November 5, 1999 Robert Ripp entered into an agreement to purchase 62,500 shares of LightPath Class A Common Stock for $4.00 per share in connection with his election to serve as Chairman of the Board of Directors. Mr. Ripp also received warrants to purchase up to 281,250 shares of Class A Common Stock at $6.00 per share at any time through November 10, 2009. The resale of these shares were registered on a Form S-3 that became effective on January 18, 2000. All of the Preferred Stock, Class C, Class D, Class E, Class F, Class G, Class H, Class I, Class J, Class K and Class L Warrants, and the Class A Common Stock and warrants issued to Robert Ripp, were issued to accredited investors in private placements pursuant to Rule 506 of Regulation D promulgated under the Securities Act of 1933, as amended. On January 11, 2000, we called all of our outstanding Class A Warrants for redemption on February 10, 2000 at the redemption price of $.05 per Class A Warrant. Each Class A Warrant was exercisable at a price of $6.50 for one share of Class A Common Stock and one Class B Warrant. As of March 31, 2000 substantially all of the outstanding 2.7 million Class A Warrants and approximately 2 million Class B Warrants were exercised for net proceeds of approximately $33 million. On May 15, 2000 we called all of our outstanding Class B warrants for redemption on June 13, 2000 at the redemption price of $.05 per Class B Warrant. Each Class B Warrant was exercisable at a price of $8.75 for one share of Class A Common Stock. As of June 30, 2000 substantially all of the outstanding Class B Warrants were exercised resulting in the issuance of approximately 2.8 million shares of Class A Common Stock and net proceeds of approximately $23.5 million were received. On February 25, 1998, our Board of Directors declared a dividend distribution of a right to purchase (a "Right") one share of Series D Participating Preferred Stock for each outstanding share of Class A Common Stock, $0.01 par value, of LightPath. The dividend became payable on the record date May 1, 1998, to stockholders of record as of the close of business on that date. Each Right entitles the registered holder to purchase from us one one-hundredth of a share of Series D Participating Preferred Stock, $.01 par value, of LightPath, at a price of $35.00 per share, subject to adjustment following the occurrence of certain events. The description and terms of the Rights are set forth in a Rights Agreement, dated as of May 1, 1998 between LightPath and Continental Stock Transfer & Trust Company, as Rights Agent. A copy of the Rights Agreement, including the Certificate of Designation, the form of Rights Certificate and the Summary of Rights to Purchase Preferred Stock to be provided to stockholders of LightPath, was attached as Exhibit 1 to our Registration Statement filed on Form 8-A, dated April 28, 1998. 35
LightPath Technologies, Inc. - Form 10K, June 30, 2002 SELECTED HISTORICAL CONSOLIDATED FINANCIAL DATA LightPath is providing the following information to assist you in your financial analysis of the Company. The table below represents selected historical consolidated statement of operations and balance sheet data of LightPath Technologies, Inc. and subsidiaries. The selected financial data set forth below for the years ended June 30, 1998 through 2002 are derived from, and are qualified by reference to, the audited consolidated financial statements of LightPath Technologies, Inc. and subsidiaries. This information is only a summary. You should read it in conjunction with LightPath's historical consolidated financial statements and related notes and "Management's Discussion and Analysis of Financial Condition and Results of Operations," which are included elsewhere herein. <TABLE> <CAPTION> In 000's except per share data Fiscal Year ended June 30 - ----------------------------------------------------------------------------------------------------------- 2002 2001 2000 1999 1998 --------- --------- --------- --------- --------- <S> <C> <C> <C> <C> <C> Total Revenues $ 12,507 $ 26,143 $ 2,266 $ 1,086 $ 758 Cost of Sales 15,157 15,284 1,310 409 290 Operating Loss (51,582) (63,126) (16,198) (2,857) (3,553) Net loss applicable to common shareholders $ (50,745) $ (60,853) $ (17,842) $ (3,817) $ (6,030) ========= ========= ========= ========= ========= Basic & Diluted Net Loss per share $ (2.56) $ (3.19) $ (1.86) $ (0.89) $ (2.00) ========= ========= ========= ========= ========= Number of shares used in per share calculations 19,807 19,064 9,587 4,271 3,011 ========= ========= ========= ========= ========= As of June 30, Total Assets $ 36,977 $ 84,290 $ 100,713 $ 3,136 $ 6,308 Working Capital 14,138 35,375 59,129 1,001 4,561 Redeemable Preferred Stock -- 1,417 1,601 2,399 5,452 Redeemable Preferred Stock and Stockholders' Equity $ 32,442 $ 78,024 $ 98,298 $ 2,708 $ 4,895 </TABLE> Notes: LightPath has not declared any dividends during the periods presented. No dividend payments are expected in the foreseeable future. The Company's operating loss during fiscal 2002 includes the following: * Asset impairment charges of $1.5 million, recorded in the second quarter, due to adjustments to the carrying value of a customer supply agreement, associated with the acquisition of Horizon Photonics Inc. in April 2000; * Asset impairment charges of $4.9 million, recorded in the second quarter, due to adjustments to the carrying value of certain intangible assets, associated with the acquisition of Geltech Inc. in September 2000; * Asset impairment charges of $0.6 million, recorded in the second quarter, related to the write down of certain excess manufacturing equipment held for disposal; * Asset impairment charges of $3.2 million, recorded in the fourth quarter, due to certain manufacturing and other equipment and leasehold improvements held for disposal in connection with the Company's plan to relocate manufacturing operations and corporate headquarters to Florida during fiscal 2003; * A write down in the carrying value of our investment in LightChip of $6.3 million, recorded in the fourth quarter, due to a decline in the per share price of a subsequent third party round of financing completed in May 2002; * A restructuring charge of $1.1 million, recorded in the fourth quarter, related to severance charges for involuntary employee terminations and certain lease related costs in connection with the 36
LightPath Technologies, Inc. - Form 10K, June 30, 2002 Company's plan to relocate manufacturing operations and corporate headquarters to Florida during fiscal 2003; and * Stock-based compensation charges of $4.8 million. The Company's operating loss during fiscal 2001 includes the following: * Asset impairment charges of $13.4 million, recorded in the fourth quarter, due to adjustments to the carrying value of a customer supply agreement and related goodwill, associated with the acquisition of Horizon Photonics Inc. in April 2000; * A $9.1 million charge, recorded in the first quarter, related to the acquired in process research and development in connection with the acquisition of Geltech, Inc. in September 2000; * An asset impairment charge of $0.4 million, recorded in the second quarter, due to plans to dispose of certain excess manufacturing equipment no longer utilized; and * Stock-based compensation charges of $11.1 million. The Company's operating loss during fiscal 2000 includes the following: * A $4.2 million charge, recorded in the fourth quarter, related to the acquired in process research and development recorded in connection with the acquisition of Horizon Photonics, Inc.; and * Stock-based compensation charges of $3.1 million. During fiscal 2000, the Company called all of its outstanding Class A warrants and Class B warrants for redemption. As of June 30, 2000, substantially all of the warrants were exercised resulting in cash proceeds of approximately $56 million and the issuance of approximately 7.5 million shares of Class A common stock. 37
ITEM 6. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS THE PRIVATE SECURITIES LITIGATION REFORM ACT OF 1995 PROVIDES A SAFE HARBOR FOR FORWARD LOOKING STATEMENTS MADE BY OR ON BEHALF OF THE COMPANY. ALL STATEMENTS IN THIS "MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS" AND ELSEWHERE IN THIS REPORT, OTHER THAN STATEMENTS OF HISTORICAL FACTS, WHICH ADDRESS ACTIVITIES, EVENTS OR DEVELOPMENTS THAT THE COMPANY EXPECTS OR ANTICIPATES WILL OR MAY OCCUR IN THE FUTURE, INCLUDING SUCH THINGS AS FUTURE CAPITAL EXPENDITURES, GROWTH, PRODUCT DEVELOPMENT, SALES, BUSINESS STRATEGY AND OTHER SIMILAR MATTERS ARE FORWARD-LOOKING STATEMENTS. THESE FORWARD-LOOKING STATEMENTS ARE BASED LARGELY ON THE COMPANY'S CURRENT EXPECTATIONS AND ASSUMPTIONS AND ARE SUBJECT TO A NUMBER OF RISKS AND UNCERTAINTIES, MANY OF WHICH ARE BEYOND THE COMPANY'S CONTROL. ACTUAL RESULTS COULD DIFFER MATERIALLY FROM THE FORWARD-LOOKING STATEMENTS SET FORTH HEREIN AS A RESULT OF A NUMBER OF FACTORS, INCLUDING, BUT NOT LIMITED TO, THE COMPANY'S EARLY STAGE OF DEVELOPMENT, THE NEED FOR ADDITIONAL FINANCING, INTENSE COMPETITION IN VARIOUS ASPECTS OF ITS BUSINESS AND OTHER RISKS DESCRIBED IN THE COMPANY'S REPORTS ON FILE WITH THE SECURITIES AND EXCHANGE COMMISSION. IN LIGHT OF THESE RISKS AND UNCERTAINTIES, ALL OF THE FORWARD-LOOKING STATEMENTS MADE HEREIN ARE QUALIFIED BY THESE CAUTIONARY STATEMENTS AND THERE CAN BE NO ASSURANCE THAT THE ACTUAL RESULTS OR DEVELOPMENTS ANTICIPATED BY THE COMPANY WILL BE REALIZED. THE COMPANY UNDERTAKES NO OBLIGATION TO UPDATE OR REVISE ANY OF THE FORWARD LOOKING STATEMENTS CONTAINED HEREIN. ACQUISITIONS GELTECH, INC. On September 20, 2000, LightPath acquired all of the outstanding shares of Geltech, Inc. (Geltech), a manufacturer of precision molded aspheric optics used in the active telecommunication components markets, for an aggregate purchase price of approximately $28.5 million (822,737 shares of LightPath Class A Common Stock). In the first quarter of fiscal 2001, the Company recorded an immediate non-recurring charge of $9.1 million related to the acquired in-process research and development of Geltech. The value assigned to in-process research and development ("IPR&D") was determined by the Company based on estimates of the projected discounted cash flows from certain development projects including diffraction gratings, waveguides, lens arrays and sub-assembly technologies. These IPR&D programs were in various stages of completion ranging from 30% to 50% of completion, with estimated completion dates through December 2001 and projected costs to complete of approximately $2.25 million. As of June 30, 2001 these IPR&D programs were not complete and a new completion date of June 2002 was established. Geltech's IPR&D programs did not generate sales in fiscal 2001 which was consistent with the revenue projections. Geltech's IPR&D programs did not generate material sales from these programs during the year ended June 30, 2002 which is consistent with the revenue projections. During the second quarter of fiscal 2002 the Company decided to defer further development of the diffraction gratings and waveguides, projects which were in process at the acquisition of Geltech, due primarily to the continued decline in the market for telecommunications components. The sub-assembly technologies project concluded in the third quarter, however sales during the quarter were not material. The development of the lens arrays project was concluded during the fourth quarter of fiscal 2002 which resulted in an immaterial amount of sales during the fourth quarter. Future sales will depend on customer acceptance of this product line. For fiscal 2002, the consolidated research and development expenditures budget for LightPath was approximately $7.7 million, which included approximately $1.7 million related to the ongoing development efforts which were in process at the acquisition of Geltech. For the year ended June 30, 2002, we estimate approximately $1.3 million of research and development expenditures were incurred in connection with these efforts. HORIZON PHOTONICS, INC. On April 14, 2000, LightPath acquired Horizon Photonics, Inc. (Horizon), a company engaged in the automated production of passive optical components for the telecommunications and data communications markets, for a total purchase price of approximately $40.2 million ($1 million cash and 1.4 million shares of 38
LightPath Technologies, Inc. - Form 10K, June 30, 2002 Class A Common Stock). In the fourth quarter of fiscal 2000, the Company recorded an immediate non-recurring charge of $4.2 million, related to the acquired in-process research and development of Horizon. The in-process research and development ("IPR&D") related to micro-collimator products as well as active alignment and isolator injection molding technologies that were under development at the time of acquisition. These IPR&D programs were in various stages of completion ranging from 50% to 60%, with estimated completion dates through June 2001 and estimated costs to complete the projects of $1.1 million. As of June 30, 2001 these IPR&D programs were not completed and a revised completion date of June 2002 was established. Horizon's IPR&D programs did not generate sales in fiscal 2001 which was consistent with the revenue projections. Horizon's IPR&D programs generated sales of approximately $2.4 million during the year ended June 30, 2002. The micro-collimator program has been transferred to the Albuquerque development group. The isolator injection molding technologies was completed in late December 2001 and accounts for all of the IPR&D generated sales. The active alignment program was completed during the fourth quarter of fiscal 2002. For fiscal 2002, the consolidated research and development expenditures budget for LightPath was approximately $7.7 million, which included approximately $1.6 million related to the ongoing development efforts which were in process at the acquisition of Horizon. For the year ended June 30, 2002, we estimate approximately $1.6 million of research and development expenditures were incurred in connection with these efforts. YEAR ENDED JUNE 30, 2002 COMPARED TO THE YEAR ENDED JUNE 30, 2001 CONSOLIDATED OPERATIONS Our consolidated revenues totaled $12.5 million for fiscal 2002, a decrease of approximately $13.6 million or 52% compared to revenues for fiscal 2001. The decrease was primarily attributable to a decrease in telecom product sales of $12.7 million or 60%, and a $0.9 million or 18% decrease in traditional optics sales. Sales generated from the acquired Geltech business (September 2000) accounted for $5.1 million or 41% of the total revenue in fiscal 2002 as compared to $7.8 million or 30% of total revenue for the comparable period of fiscal 2001. In fiscal 2002, consolidated cost of sales was 121% of product sales, an increase from the comparable period last year in which the Company reported cost of sales of 58.5%. During fiscal 2002, the Company recorded a write down of inventory of approximately $3 million. Excluding inventory write downs, cost of sales during the year would have been approximately 97%, an increase of 38.5% from the comparable period of fiscal 2001 (see discussion below). Substantially all of the increase was due to the reduction in sales for telecom products, and the underutilization of manufacturing facilities and staff. To counter these cost overages, we reduced the manufacturing staff, eliminated unprofitable traditional optic products, and closed our Auburn, California facility. The changes implemented in fiscal 2002 resulted in a total decrease in manufacturing personnel of 45%. During the fourth quarter we announced a plan to consolidate all of our lens manufacturing from Albuquerque to Orlando, Florida by September 30, 2002. The announced consolidation will further reduce our manufacturing staff by approximately 50 persons or 30% of total employees at June 30, 2002. In addition, the Company recorded asset impairment charges of $3.2 million to write down the carrying value to estimated fair value less costs to sell of certain manufacturing and other equipment and leasehold improvements held for disposal in connection with the Company's plan to relocate manufacturing operations and corporate headquarters to Florida during fiscal 2003.It is anticipated that these measures will improve our cost of sales in future quarters as we work to balance our manufacturing capabilities and product lines. However, economic conditions may result in pricing pressure in fiscal 2003 which could reduce margins. During fiscal 2002, total inventory decreased modestly from prior levels before consideration of the inventory write downs recorded during fiscal 2002. Raw materials continue to make up the majority of our inventory at $1.7 million or 69% of total inventory at June 30, 2002. We have approximately $1.4 million 39
LightPath Technologies, Inc. - Form 10K, June 30, 2002 of raw materials on hand specifically used in the production of isolators that have long lead times and the Company has elected to maintain a sufficient quantity of these materials. Throughout fiscal 2002, the Company noted several factors that caused us to re-evaluate the carrying value of inventory resulting in charges to write down inventory to net realizable value, or to write off inventory to be disposed of given no alternative future use was identified. Total inventory charges of $1.9 million and $1.1 million were recorded during fiscal 2002 related to finished goods/work in process and raw materials inventory, respectively. Specifically, during the first and second quarters, inventory charges of $1.3 million were recorded as we continued to note declining quarterly sales from previous levels, lack of growth in sales orders and no sales in certain product areas where we had purchased raw materials. The Company also received notification that certain lenses and raw materials did not pass qualification requirements for their particular applications during the second quarter. During the fourth quarter, our manufacturing group changed the production methodology for performance improvements rendering some products obsolete that resulted in charges of $0.5 million. During the fourth quarter, we also noted that the value of certain finished lens and raw materials inventory had diminished due to changes in market conditions as some competitors reduced prices for similar products to a level below our cost resulting in inventory write downs of $0.4 million. Finally, the Company noted uncertainty regarding the realization of certain finished products on hand due to cancelled purchase orders which resulted in write downs of $0.8 million during the fourth quarter. During fiscal 2002, selling, general and administrative costs decreased by $7.7 million from fiscal 2001 to $11.6 million, which includes $2.2 million accrued for legal fees and the proposed litigation settlement. Fiscal 2001 results include $2.3 million related to litigation settlement costs and legal fees. The decreases were primarily in administration and manufacturing support personnel costs. The Company's operating loss during fiscal 2002 includes the following non-cash charges: asset impairment charges of $1.5 million, recorded in the second quarter, due to adjustments to the carrying value of a customer supply agreement, associated with the acquisition of Horizon Photonics Inc. in April 2000; asset impairment charges of $4.9 million, recorded in the second quarter, due to adjustments to the carrying value of certain intangible assets, associated with the acquisition of Geltech Inc. in September 2000; asset impairment charges of $0.6 million, recorded in the second quarter, related to the write down of certain excess manufacturing equipment held for disposal; asset impairment charges of $3.2 million, recorded in the fourth quarter, related to the write down of certain manufacturing and other equipment and leasehold improvements held for disposal in connection with the Company's plan to relocate manufacturing operations and corporate headquarters to Florida during fiscal 2003; a write down in the carrying value of our investment in LightChip of $6.3 million, recorded in the fourth quarter, due to the per share price of a third party round of financing completed in May 2002; a restructuring charge of $1.1 million, recorded in the fourth quarter, related to severance charges for involuntary employee terminations and certain lease related costs in connection with the Company's plan to relocate manufacturing operations and corporate headquarters to Florida during fiscal 2003; and stock-based compensation charges of $4.8 million. In addition, the Company reversed the net deferred tax liability of approximately $3.3 million established in connection with the non-taxable purchase of Geltech against the related intangible assets prior to the impairment charge recorded in the second quarter as the carrying value of the remaining Geltech intangible assets was reduced in connection with the impairment. Research and development costs remained at approximately $7.1 million in both fiscal 2002 and 2001. The majority of research and development work consisted of expenses associated with automation development and research for products in the areas of telecommunication switches, isolators and next generation optical subassemblies, waveguides and lens arrays. Throughout the fiscal year, in an effort to control research and development costs, the Company has reduced development staff levels, deferred additional expenditures on the switch project and assigned the New Jersey development facility lease as of September 2002. 40
LightPath Technologies, Inc. - Form 10K, June 30, 2002 The Company recorded a charge of approximately $1.1 million in the fourth quarter in connection with the Company's announced plans to consolidate and relocate its corporate headquarters and manufacturing facilities based in Albuquerque, New Mexico to Orlando, Florida by December 31, 2002. We believe a single site will bring a sharper focus in customer support, a reduction in duplicate process engineering resources and a higher capacity utilization to significantly improve the cost competitiveness of our products. Costs incurred consist primarily of severance costs for involuntary employee terminations for 67 manufacturing and administrative employees and certain exit costs. As of June 30, 2002, none of the accrued costs were paid and management expects to pay all employee severance costs prior to December 31, 2002 and lease costs will be substantially paid by June 30, 2003. Investment and other income included a non-recurring gain of approximately $390,000 related to the first quarter sale of certain assets located in Auburn, CA, while interest earned on investments decreased approximately $1.7 million during fiscal 2002 as a result of lower interest rates and a decrease in cash balances. Interest and other expenses during fiscal 2002 and 2001 were not significant. Net loss of $50.7 million in fiscal 2002 includes $29.2 million from the non-cash charges described above, $1.1 million related to the restructuring and consolidation of facilities, $2.2 million related to litigation settlement costs and $3 million for inventory write-offs, which if excluded, would have resulted in a net loss of $15.2 million. This compares to fiscal 2001 in which the Company reported a net loss of $60.8 million including $47.6 million in non-cash charges and $2.9 million related to litigation settlement costs and inventory write-offs, which if excluded, would have resulted in a net loss of $10.3 million. The $4.9 million increase in net loss in 2002 excluding the non-cash and other charges is due primarily to the $13.6 million decrease in total revenues, offset by decreased cost of sales of $2.4 million while decreases of $7.7 million in operating costs primarily in selling, general and administrative expense were offset by increased other expenses of $1.4 million. Net loss applicable to common shareholders of $50.7 million for fiscal 2002 included an additional charge of $61,906 attributable to the premium on our outstanding preferred stock. Net loss per share of $2.56 in fiscal 2002 decreased $0.63 compared to the fiscal 2001 net loss per share of $3.19. Net loss applicable to common shareholders for fiscal 2001 of $60.9 million included $89,549 attributable to the premium on the Company's outstanding preferred stock. At the end of the fourth quarter, the Company announced the appointment of Ken Brizel as President and CEO and his election to the Board of Directors. Mr. Brizel has spent 21 years in the communications and microelectronics industries, most recently as Senior Vice President Strategy and Business Development for Oplink Communications. TELECOM SEGMENT For fiscal 2002, telecom product sales decreased 60% to approximately $8.3 million from $21.1 million for fiscal 2001. The telecom segment sales in fiscal 2002 include isolator sales of $4.4 million, $1.8 million of collimator product sales and $2.1 million of active telecom components sales. The telecom segment incurred an operating loss of $11.7 million for fiscal 2002 as compared to a loss of $7.2 million for the comparable period last year due primarily to decreased sales, reduced margins due to underutilization of capacity, inventory write-offs and increased research and development costs associated with the switch project. The decrease in telecom sales for fiscal 2002 together with the reduced sales backlog reflect the general market condition for optical components and the broader telecommunications sector. We continue to work closely with our customers to manage their inventory levels as well as focus on next generation products with them. We have focused on design wins for next generation systems however overall spending levels continue to be restrained. During the third quarter of fiscal 2002, the Company announced five new products designed for use in both long-haul and metropolitan area. Each new product utilizes advanced 41
LightPath Technologies, Inc. - Form 10K, June 30, 2002 manufacturing technology to `build-in' much of the optical alignment work that was formerly performed by the customer. They also underscore LightPath's strategic directive of broadening our base of innovative optical components and assemblies by combining application specific engineering with automated manufacturing. During the fourth quarter we announced we would consolidate lens product lines in Florida, relocate corporate headquarters in Florida, and reorganize internally into three groups; the Optical Lens Group; the Laser Component Group; and the Optical Integration Group. The Optical Lens Group will manage the collimator and aspheric lens product which continues to be a core capability for LightPath which will be consolidated in the Orlando, Florida facility. In response to our customers' requirements for a second site capability and the demand opportunity for comprehensive optical packing solutions, we intend to increase our emphasis on the integrated platform segment of our business through the Laser Component Group. We have had great success with our isolator product line, and as our customers ask for more demanding optical performance, we see a great opportunity to provide the entire solution from laser to fiber. The Laser Component Group will be investing a modest amount in capital expenditures and increased research and development, in support of optical generation and detection applications, such as transmitters, transceivers and pumps. The Optical Integration Group will allow LightPath to augment current passive optical packages such as OASIS(TM) and Vectra(TM) collimator arrays with new innovative passive optical modules, such as multiport and hybrid devices, to provide effective optical management solutions for our customers. TRADITIONAL OPTICS SEGMENT During fiscal 2002, approximately $4.2 million of segment sales were comprised of $2.9 million in finished lens products and $1.3 million from laser optic lens sales, compared with segment sales of $5.1 million for the comparable period last year. During the first quarter of fiscal 2002, we stopped manufacturing several product lines, including data storage lenses, due to unfavorable margins. In addition, due to the closure of the Auburn, CA facility, we consolidated the manufacturing of Geltech's finished lens products into the Orlando, FL facility. The traditional optics segment incurred an operating loss of approximately $4 million for fiscal 2002 as compared to operating income of approximately $73,000 for the comparable period last year. The increased loss was primarily due to reduced sales, unfavorable margins and inventory write-offs we incurred during fiscal 2002. During the fourth quarter we announced we would consolidate lens product lines in Florida and reorganize internally. The Optical Lens Group will include optical lens business and it will be consolidated in the Orlando, Florida facility. While we have recently signed a strategic agreement with Hikari Glass to manufacture GRADIUM(TM) glass for LightPath and have engaged with suppliers in the Far East to secure low cost lenses, we intend to further reduce overhead and excess capacity in our lens facilities. The single site will bring a combined customer support, a reduction in duplicate process engineering and a higher capacity utilization which should significantly improve the cost competitiveness of our products. As part of our initiative, we intend to aggressively extend our offerings to non-telecom business segments. YEAR ENDED JUNE 30, 2001 COMPARED TO THE YEAR ENDED JUNE 30, 2000 CONSOLIDATED OPERATIONS Our consolidated revenues totaled $26.1 million for fiscal 2001, an increase of approximately $23.9 million or 1054% over fiscal 2000. The growth was primarily attributable from increases of $12.1 million (51%) in isolator and other sales, $7.8 million (33%) in active telecom components and finished lenses and $4 million (16%) primarily in collimator products. Sales generated from acquired businesses accounted for $19.9 million or 83% of the increase in total revenue. 42
LightPath Technologies, Inc. - Form 10K, June 30, 2002 During fiscal 2001, consolidated cost of sales was 58% of total revenues, a decrease from fiscal 2000, when cost of sales was 62% of product sales (excludes product development fees). The decrease was primarily due to increased margins on isolator products. During fiscal 2001, selling, general and administrative costs increased by $13.3 million from fiscal 2000 to $19.3 million, due to $1.6 million incurred for litigation settlement, $0.7 million for legal costs incurred in E shareholder litigation, $5.3 million of administrative costs incurred by acquired companies, Horizon and Geltech, and $5.7 million from increases in LightPath personnel in administration, manufacturing overhead and support. We incurred non-cash charges totaling $47.6 million during fiscal 2001, including $13.7 million for impairment of goodwill and intangible assets related to the deferral of sales by a significant customer and consolidation of traditional optics facilities, $11.2 million in non-cash stock-based compensation charges, $13.6 million in amortization of goodwill and intangibles from acquisitions, and a non-recurring charge of $9.1 million for in-process research and development from the acquisition of Geltech. Research and development costs increased by approximately $5.6 million from fiscal 2000 to $7.1 million in fiscal 2001, of which $2.1 million was due to acquisitions. The majority of development work consisted of expenses associated with the Gen3 collimator assembly, LP1600 opto-mechanical switch, lens arrays and the New Jersey facility where development work is on-going to expand the Company's products to the areas of switches, interconnects and cross-connects for the telecommunications industry. Our acquired businesses continue their efforts in the area of isolators and next generation optical subassemblies, diffraction gratings, waveguides, lens arrays and sub-assembly technologies. Investment income increased approximately $1.4 million in fiscal 2001 due to the increase in interest earned on temporary investments as a result of an increase in cash balances. Interest expense was not significant in 2001. In July 1999, we issued $1 million aggregate principal amount of 6% convertible debentures and paid approximately $10,000 of interest expense. We recognized an interest charge of $381,869 in the first quarter of fiscal year 2000 for the beneficial conversion feature associated with the Debentures and $43,926 of the remaining debt discount was amortized from the issuance date through September 24, 1999 when all of the Debentures were converted and related warrants were exercised resulting in the issuance of approximately one million shares of Class A Common Stock. Net loss of $60.8 million for fiscal 2001 was an increase of approximately $45.2 million from fiscal 2000. Of this amount, $47.6 million related to non-cash charges described above and $2.3 million related to one-time charges for a litigation settlement and the legal costs associated with E shareholder suit. Non-cash charges in 2000 were approximately $9.8 million. Excluding the non-cash and one time charges from both years, the remaining $5.1 million increase was due primarily to increased cost of sales and operating costs, primarily in selling, general and administrative expense and a $5.6 million increase in research and development costs. These increased costs were partially offset by the $23.9 million increase in total revenues, $1.4 million increase in interest income and the $402,000 reduction of interest expense during fiscal 2001. Net loss applicable to common shareholders of $60.9 million for fiscal 2001 included an additional charge of $89,549 attributable to the premium on our outstanding preferred stock. Net loss per share of $(3.19) in fiscal 2001 increased $1.33 compared to the fiscal 2000 net loss per share of $(1.86). Net loss applicable to common shareholders of $17.8 million in fiscal 2000 included an additional charge of $2.1 million for the imputed dividend and $137,281 attributable to the premium on the Company's outstanding preferred stock. TELECOM SEGMENT During fiscal 2001, telecom product sales increased to approximately $21 million from $1.5 million for fiscal 2000. The telecom segment results include isolator sales of $13 million, $4.2 million of collimator product sales and $3.8 million of aspheric optics for active telecom product sales. Sales generated from acquired businesses accounted for $15.8 million or 81% of the increase in telecom revenue. 43
LightPath Technologies, Inc. - Form 10K, June 30, 2002 Sales to Agere Systems, Inc. ("Agere") (formerly the Microelectronics division of Lucent Technologies Inc.) represented 55% of the telecom sales for fiscal 2001. In August 2000, we introduced the LP1600 opto-mechanical switch which employs a patented retro-reflecting mirror design in conjunction with our Gen3 collimator. Due to the economic environment we elected to suspend expenses related to the launch of this product. The telecom segment incurred an operating loss of $7.2 million for fiscal 2001 as compared to an operating loss of $7.5 million for fiscal 2000. Significant events which impacted our telecom segment during fiscal 2001 included: * Recorded telecom sales of $21 million. The completion of the expansion of the Horizon automated manufacturing facility which is dedicated to large volume isolator production and the development of next-generation optical subassemblies contributed to the overall sales growth as well as the inclusion of sales from Geltech's telecom products. Horizon released a new line of isolator assemblies for application in the metro and access telecom markets. This line is based on a flexible manufacturing platform which can address a wide range of customer specifications while attracting lower cost applications; * The September 20, 2000 expansion of our telecom products to include active components through the acquisition of privately held Geltech. We began acquisition talks with Geltech, due to our interest in its precision molded aspheric optics used in the active telecommunication components markets. The acquisition purchase price was $27.5 million which was paid through the issuance of 822,737 shares of Class A common stock plus approximately $1 million in acquisition costs for an aggregate purchase price of approximately $28.5 million; * Changes to LightPath's management team included the addition of Dennis Yost as LightPath's Chief Operating Officer and promotion of Bob Cullen to Executive Vice President in charge of Technology Integration. Mr. Yost will focus on the advancement of our telecom lines, specifically collimators and arrays. Mr. Cullen, the current President of Horizon, expanded his role to assist in the further automation of the Company including manufacturing, packaging, assembly and test methods; and * The Company's additional investment in LightChip, Inc. of $7.2 million (August 2000 private placement significant investors included Berkeley International, Morgenthaler Ventures, J.P. Morgan Capital, AT&T Ventures and LightPath). TRADITIONAL OPTICS SEGMENT During fiscal 2001, the majority of our traditional optics product sales of approximately $5.1 million were from Geltech's lens sales and existing customers for laser optic lenses. Traditional optics sales in fiscal 2000 were approximately $768,000. The growth was primarily due to the acquisition of Geltech's traditional optics business in September 2000 which accounted for $4 million of traditional optics product sales in fiscal 2001. Geltech's products are used in data storage and by manufacturers of medical equipment. The majority of Geltech's sales are due to custom quotations as they have no direct distribution channels. Revenues for fiscal 2000 included approximately $167,000 in license fees and government funded subcontracts. The traditional optics segment reported operating income of approximately $73,000 for fiscal 2001 as compared to an operating loss of approximately $365,000 for fiscal year 2000. CRITICAL ACCOUNTING POLICIES The preparation of the Consolidated Financial Statements in conformity with generally accepted accounting principles requires the Company to select appropriate company accounting policies, and to make judgments and estimates affecting the application of those accounting policies. In applying the Company's accounting policies, different business conditions or the use of different assumptions may result in materially different amounts reported in the Consolidated Financial Statements. 44
LightPath Technologies, Inc. - Form 10K, June 30, 2002 In response to the Securities and Exchange Commission's ("SEC") Release No. 33-8040, "Cautionary Advice Regarding Disclosure About Critical Accounting Policies," the Company has identified the most critical accounting principles upon which the Company's financial status depends. The critical principles were determined by considering accounting policies that involve the most complex or subjective decisions or assessments. The most critical accounting principles identified relate to: (i) revenue recognition; (ii) inventory valuation; (iii) long-lived assets; (iv) investment in LightChip and (v) intangible assets. These critical accounting policies and the Company's other significant accounting policies are disclosed in Note 1 to the Company's Consolidated Financial Statements. REVENUE RECOGNITION. The Company recognizes revenue upon shipment of the product provided that persuasive evidence of a final agreement exists, delivery has occurred, the selling price is fixed or determinable and collectibility is reasonably assured. INVENTORY VALUATION. The Company regularly assesses the valuation of inventories and writes down those inventories that are obsolete or in excess of forecasted usage to estimated net realizable value. Estimates of realizable value are based upon the Company's analyses and assumptions including, but not limited to, forecasted sales levels by product, expected product lifecycle, product development plans and future demand requirements. If market conditions are less favorable than the Company's forecast or actual demand from customers is lower than the Company's estimates, the Company may be required to record additional inventory write-downs. If demand is higher than expected, the Company may sell inventories that have previously been written down. LONG-LIVED ASSETS. The Company evaluates the carrying value of long-lived assets, including property and equipment, whenever certain events or changes in circumstances indicate that the carrying amount may not be recoverable. Such events or circumstances include, but are not limited to, a prolonged industry downturn, a significant decline in the Company's market value, or significant reductions in projected future cash flows. If facts and circumstances warrant such a review, under the current standard, a long-lived asset would be impaired if future undiscounted cash flows, without consideration of interest, are insufficient to recover the carrying amount of the long-lived asset. Once deemed impaired, the long-lived asset is written down to its fair value which could be considerably less than the carrying amount or future undiscounted cash flows. The determination of future cash flows and, if required, fair value of a long-lived asset is by its nature, a highly subjective judgment. Fair value is generally determined by calculating the discounted future cash flows using a discount rate based upon the Company's weighted average cost of capital. Significant judgments and assumptions are required in the forecast of future operating results used in the preparation of the estimated future cash flows, including long-term forecasts of the amounts and timing of overall market growth and the Company's percentage of that market, groupings of assets, discount rate and terminal growth rates. Changes in these estimates could have a material adverse effect on the assessment of property and equipment, thereby requiring the Company to write down the assets. INVESTMENT IN LIGHTCHIP. The Company accounts for its investment in LightChip under the cost method of accounting as prescribed by APB 18 given its ownership percentage of voting shares is approximately 13% at June 30, 2002. In addition, the Company regularly assesses the carrying value of its investment in LightChip to determine if a write down is necessary. The fair value of privately held securities is highly subjective and involves inherent risk. While there are several valuation techniques that could provide objective evidence of the value of equity securities, the Company considers cash transactions with independent third parties involving similar equity securities to be the strongest objective evidence of fair value. The carrying value of our investment at June 30, 2002 is based on the most recent price per share of a cash transaction involving third parties. Should a future round of financing be completed at a per share price less than the current carrying value, a write down would be required. INTANGIBLE ASSETS. The Company generally obtains intangible assets in connection with a purchase (for example, in a business combination). The assignment of value to individual intangible assets generally requires the use of a 45
LightPath Technologies, Inc. - Form 10K, June 30, 2002 specialist, such as an appraiser. The assumptions used in the appraisal process are forward-looking, and thus subject to significant judgment. Because individual intangible assets may be: (i) expensed immediately upon acquisition (for example, purchased in-process research and development assets); or (ii) amortized over their estimated useful life (for example, acquired technology or goodwill), their assigned values could have a material affect on current and future period results of operations. Further, intangible assets are subject to the same judgments when evaluating for impairment as other long-lived assets. LIQUIDITY AND CAPITAL RESOURCES We financed our initial operations through private placements of equity and debt until February 1996 when our initial public offering of units of common stock and Class A and B Warrants generated net proceeds of approximately $7.2 million. From June 1997 through November 1999, we completed four preferred stock and one convertible debt private placements which generated total net proceeds of approximately $12 million. During fiscal 2000 and 2001, we received net proceeds of approximately $67.6 million from the exercise of stock options and warrants issued at the initial public offering or in connection with previous private placements. The optical components markets have experienced a severe downturn for the last eighteen months, resulting in a significant decline in the demand for our products as well as our competitors. We believe the Company has the financial resources, and will take the necessary actions, to manage through this downturn. However, a prolonged downturn in the optical components markets or the unsuccessful move to sell our optical components into non-telecom markets, failure by the Company to anticipate or respond to product technological changes, changes by our customers or suppliers, or any significant delays in the introduction of new products, could have a material adverse effect on the Company's financial condition, operating results or cash flows. Cash used in operations for fiscal 2002 was approximately $12.9 million, a decrease of approximately $2.1 million from fiscal 2001. Throughout fiscal 2002 we reduced our cash expenditures through improved manufacturing efficiencies, suspension of selected development projects and consolidation of equipment and facilities. During the fourth quarter of fiscal 2002, we announced that we would consolidate lens product lines in Florida, close the New Mexico facilities and reorganize internally which will further decrease our cash requirements for fiscal 2003. While the Company has no firm commitments for any future financing at this time, we have a cash balance of approximately $13.2 million at June 30, 2002, and we believe that our financial resources will be sufficient to finance the Company's operations and capital expenditures, excluding acquisitions, for the next twelve months. In fiscal 2002 working capital provided was $5.6 million primarily due to the write down of inventory balances and the accrual of certain restructuring and settlement costs which were not paid as of June 30, 2002. In fiscal 2001 working capital requirements were $4.5 million primarily due to growth in accounts receivable and inventory balances. We expect to continue to incur net losses until such time, if ever, as we obtain broader market acceptance for our products at sale prices and volumes which provide adequate gross revenues to offset our operating costs. During fiscal 2002, we expended approximately $2.8 million for capital equipment and patent protection, offset by proceeds from the sale of assets of approximately $0.9 million. In addition we invested an additional $1.5 million in LightChip. The majority of the capital expenditures during fiscal 2002 were related to the equipment used to enhance or expand our manufacturing facilities. The Company's plan for fiscal 2003 estimates approximately $1.6 million will be expended to enhance or expand our manufacturing facilities and to provide for growth in passive and active assemblies, however, we may spend more or less depending on circumstances. 46
LightPath Technologies, Inc. - Form 10K, June 30, 2002 The table below presents the Company's contractual obligations as of June 30, 2002. The capital lease obligations appear on the Company's balance sheet. The operating leases relate to real estate and are commitments which are expensed as paid per the terms of the related contract, except for operating lease obligations related to operations that will be discontinued in fiscal 2003 in connection with the Company's plan to relocate and consolidate operations to Orlando Florida. The lease obligations related to locations that will not be continued are included in the employee severance and exit costs accrual on the Company's balance sheet. CONTRACTUAL OBLIGATIONS <TABLE> <CAPTION> (dollars in 000's) Total Stated Maturity Comments ------------------ ----- --------------- -------- <S> <C> <C> <C> Capital lease obligations $ 10 Sept. 2002 Amortizes monthly Note payable $ 78 Jul. 1999 Negotiating settlement with third party Operating leases $ 4,200 2003-2008 Real estate leases with monthly payments Employee severance and other exit costs $ 1,059 Apr. 2005 Severance costs to be paid by 12/31/02. Lease costs will be substantially paid by 6/30/03 Legal settlement payments on Delaware Not Settlement costs to be paid by action $ 1,500 applicable September 30, 2002 </TABLE> We currently hold an investment in LightChip who has indicated they may require additional funding in the calendar year 2003. If the Company does not participate in future equity funding its ownership percentage would be diluted. In addition, if future funding is at a per share price that is lower than the cost of our previous investment in LightChip, we will be required to write down our investment to the current market value. RECENT ACCOUNTING PRONOUNCEMENTS In June 2002, the FASB issued Statement No. 146, ACCOUNTING FOR COSTS ASSOCIATED WITH EXIT OR DISPOSAL ACTIVITIES which the Company will be required to adopt for any future costs associated with an exit or disposal activity. The Company does not believe the adoption of SFAS 146, effective July 1, 2002, will have a material effect on our results of operations or financial position. On October 3, 2001 the FASB issued Statement No. 144, "Accounting for the Impairment or Disposal of Long-Lived Assets," which addresses financial accounting and reporting for the impairment or disposal of long-lived assets. SFAS 144 supercedes SFAS 121, "Accounting for the Impairment of Long-Lived Assets and for Long-Lived Assets to Be Disposed Of," but retains many of the fundamental provisions of SFAS 121. SFAS 144 also supercedes APB Opinion No. 30, "Reporting the Results of Operations, Reporting the Effects of Disposal of a Segment of a Business, and Extraordinary, Unusual and Infrequently Occurring Events and Transactions." SFAS 144 retains the requirement in Opinion 30 to report separately discontinued operations and extends that reporting to a component of an entity that either has been disposed of or is classified as held for sale. SFAS 144 is effective for fiscal years beginning after December 15, 2001 and interim periods within those fiscal years. LightPath does not expect the adoption of SFAS 144, effective July 1, 2002, to have a material impact on its financial statements or results of operations. In June 2001, the FASB issued Statement No. 141, BUSINESS COMBINATIONS, and Statement No. 142, GOODWILL AND OTHER INTANGIBLE ASSETS. Statement 141 requires that the purchase method of accounting be used for all business combinations initiated after June 30, 2001 as well as all purchase method business 47
LightPath Technologies, Inc. - Form 10K, June 30, 2002 combinations completed after June 30, 2001. Statement 141 also specifies criteria intangible assets acquired in a purchase method business combination must meet to be recognized and reported apart from goodwill. Statement 142 will require that goodwill and intangible assets with indefinite useful lives no longer be amortized, but instead be tested for impairment at least annually in accordance with the provisions of Statement 142. Statement 142 will also require that intangible assets with estimable useful lives be amortized over their respective estimated useful lives to their estimated residual values, if any, and reviewed for impairment in accordance with FAS Statement No. 121, ACCOUNTING FOR THE IMPAIRMENT OF LONG-LIVED ASSETS AND FOR LONG-LIVED ASSETS TO BE DISPOSED OF. The Company is required to adopt the provisions of Statement 141 and Statement 142 on July 1, 2002. The Company had no business combinations initiated subsequent to July 1, 2001. Upon adoption of Statement 142, the Company is required to evaluate its existing intangible assets and goodwill that were acquired in a prior purchase business combinations, and to make any necessary reclassifications in order to conform with the new criteria in Statement 141 for recognition apart from goodwill. Upon adoption of Statement 142, the Company will be required to reassess the useful lives and residual values of all intangible assets acquired, and make any necessary amortization period adjustments by the end of the first interim period after adoption. In addition, to the extent an intangible asset is identified as having an indefinite useful life, the Company will be required to test the intangible asset for impairment in accordance with the provisions of Statement 142 within the first interim period. Any impairment loss will be measured as of the date of adoption and recognized as the cumulative effect of a change in accounting principle in the first interim period. In connection with Statement 142's transitional goodwill impairment evaluation, the Statement will require the Company to perform an assessment of whether there is an indication that goodwill is impaired as of the date of adoption. To accomplish this, the Company must identify its reporting units and determine the carrying value of each reporting unit by assigning the assets and liabilities, including the existing goodwill and intangible assets, to those reporting units as of the date of adoption. The Company will then have up to six months from the date of adoption to determine the fair value of each reporting unit and compare it to the reporting unit's carrying amount. To the extent a reporting unit's carrying amount exceeds its fair value, an indication exists that the reporting unit's goodwill may be impaired and the Company must perform the second step of the transitional impairment test. In the second step, the Company must compare the implied fair value of the reporting unit's goodwill, determined by allocating the reporting unit's fair value to all of it assets (recognized and unrecognized) and liabilities in a manner similar to a purchase price allocation in accordance with Statement 141, to its carrying amount, both of which would be measured as of the date of adoption. This second step is required to be completed as soon as possible, but no later than the end of the year of adoption. Any transitional impairment loss will be recognized as the cumulative effect of a change in accounting principle in the Company's statement of operations. The Company has unamortized goodwill of approximately $2.3 million remaining at July 1, 2002, which will be subject to the transition provisions of Statements 141 and 142. Amortization expense related to goodwill was $1.3 million, $2.95 million and $2.95 million for the years ended June 30, 2002, 2001 and 2000, respectively. Amortization expense in fiscal 2003 would have been $1.3 million. Because of the extensive effort needed to comply with adopting Statements 141 and 142, it is not practicable to reasonably estimate the impact of adopting these Statements on the Company's financial statements at the date of this report, including whether it will be required to recognize any transitional impairment losses as the cumulative effect of a change in accounting principle. 48
LightPath Technologies, Inc. - Form 10K, June 30, 2002 ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK LightPath's liquid investments are cash invested in money market accounts or overnight repurchase agreements. Due to the short-term nature of these investments, changes in market interest rates of up to 10 percent either up or down would not significantly impact the Company's results of operations. Therefore, LightPath does not believe that the market risk related to these investments is significant. ITEM 8. FINANCIAL STATEMENTS See index at F-1. ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE Not applicable. 49
LightPath Technologies, Inc. - Form 10K, June 30, 2002 PART III ITEM 9. DIRECTORS, EXECUTIVE OFFICERS, PROMOTERS AND CONTROL PERSONS; COMPLIANCE WITH SECTION 16(a) OF THE EXCHANGE ACT. DIRECTORS AND EXECUTIVE OFFICERS The Directors and Executive Officers of LightPath, and their respective ages and positions with us, are as follows: <TABLE> <CAPTION> Name Age Position ---- --- -------- <S> <C> <C> Robert Ripp (1)(3) 61 Chairman Kenneth Brizel 44 Chief Executive Officer, President and Director James L. Adler, Jr. (1)(2) 74 Director Robert Bruggeworth (2)(3) 41 Director, beginning May 2001 Steve Brueck(2) 57 Director, beginning July 2001 Louis Leeburg (2)(3) 48 Director Gary Silverman (1) (2) 63 Director Donald E. Lawson 51 Resigned October 2001, Chief Executive Officer, and Director Dennis Yost 39 Senior Vice President, Optical Lens Group Mark Fitch 39 Senior Vice President, Optical Integration Group Donna Bogue 44 Senior Vice President, Chief Financial Officer Robert Cullen 50 Senior Vice President, Laser Component Group and President, Horizon Photonics, Inc. Jean-Luc Nogues 48 Chief Technology Officer, and President, Geltech, Inc. </TABLE> - ---------- (1) Member of the Compensation Committee. (2) Member of the Audit Committee. (3) Member of the Finance Committee. DIRECTORS ROBERT RIPP has served as Chairman of LightPath since November 11, 1999. Mr. Ripp was Chairman and CEO of AMP Inc. from August 1998 until April 1999 when AMP was sold to TYCO, International Ltd. Mr. Ripp held various executive positions at AMP from 1994 to August 1999. Mr. Ripp spent 29 years with IBM of Armonk, NY. He held positions in all aspects of operations within IBM culminating in the last four years as Vice President and Treasurer and he retired from IBM in 1993. Mr. Ripp represents LightPath as a member of the LightChip, Inc. (an affiliate) board of directors. Mr. Ripp graduated from Iona College in 1963 and in 1967 received his M.B.A. from New York University. Mr. Ripp is currently on the board of directors of Ace, Ltd. which is listed on the New York Stock Exchange. KENNETH BRIZEL has served as a Director of LightPath, CEO and President since July 2002. Mr. Brizel has spent 21 years in the communications and microelectronics industries. From October 2000 until July 2002 he was Senior Vice President Strategy and Business Development for Oplink Communications. From April 1997 to September 2000, Mr. Brizel was Director of Strategic Marketing for 50
LightPath Technologies, Inc. - Form 10K, June 30, 2002 Optoeletronics and Network Communications Integrated Circutis groups within Lucent Microelectronics. Mr. Brizel's diverse experiences include assignments at RCA/GE, Lucent/Agere, Mostek and Star Semiconductor before joining Oplink. His responsibilities spanned sales, engineering, marketing strategy and business development. Mr. Brizel received his Bachelor of Science and Master of Science degrees in Electrical Engineering from Rensselaer Polytechnic Institute in Troy, NY. JAMES L. ADLER, JR. has served as a Director of LightPath since October 1997. Since 1989 he has been a partner in the law firm of Squire, Sanders & Dempsey L.L.P., which has acted as general counsel to LightPath since February 1996. Mr. Adler was formerly a partner of Greenbaum, Wolff & Ernst, New York City, and of Storey & Ross, Phoenix, until the merger of the latter firm with Squire, Sanders & Dempsey L.L.P. in 1989. Mr. Adler is a corporate, securities, aviation and international lawyer. In 1998-1999, Mr. Adler served as President of the Arizona Business Leadership Association. He is a member of the Arizona District Export Council and a Trustee of the Phoenix Committee on Foreign Relations. In March 1999, Mr. Adler was appointed by the government of Japan to a five year term as Honorary Consul General of Japan at Phoenix. He has previously served as Chairman of the International Law Section of the Arizona State Bar Association and, by gubernatorial appointments, as a Member of the Investment Committee of the Arizona State Retirement System and a Member and Chairman of the Investment Committee of the State Compensation Fund. Mr. Adler graduated from Carleton College, magna cum laude, and from Yale Law School in 1952. He is a member of the Arizona and New York State Bars. DR. STEVE BRUECK has served as a Director of LightPath since July 2001. Dr. Brueck is the Director of the Center for High Technology Materials (CHTM) and Professor of Electrical and Computer Engineering and Professor of Physics at the University of New Mexico in Albuquerque, New Mexico which he joined in 1985. Dr. Brueck has led the organization to become an established, internationally recognized center for optoelectronics and microelectronics research. He is a 1965 graduate of Columbia University with a Bachelor of Science degree in Electrical Engineering and a graduate of Massachusetts Institute of Technology where he received his Master of Science degree in Electrical Engineering in 1967 and Doctorate of Philosophy in Electrical Engineering in 1971. Dr. Brueck is a fellow of both the OSA and the IEEE. ROBERT BRUGGEWORTH has served as a Director of LightPath since May 2001. Mr. Bruggeworth is currently President of RF Micro Devices who he joined in 1999. From 1983 until 1999 he held various positions with Amp Incorporated, Harrisburg, PA. When he left AMP he was a Divisional Vice President, Computer and Consumer Electronics, Hong Kong. Mr. Bruggeworth is a 1983 graduate of Wilkes University with a Bachelor of Science in Electrical Engineering. LOUIS LEEBURG has served as a Director of LightPath since May 1996. Mr. Leeburg is a self-employed business consultant. From December 1988 until August 1993 he was the Vice President, Finance of The Fetzer Institute, Inc. From 1980 to 1988 he was in financial positions with different organizations with an emphasis in investment management. Mr. Leeburg was an audit manager for Price Waterhouse & Co. until 1980. Mr. Leeburg received a Bachelor of Science in Accounting from Arizona State University. Mr. Leeburg is a member of Financial Foundation Officers Group and the treasurer and trustee for the John E. Fetzer Memorial Trust Fund and the John E. Fetzer ILM Trust Fund. GARY SILVERMAN has served as a Director of LightPath since October 2001. Mr. Silverman is currently the managing partner of GWS Partners, established in 1995 to conduct searches for senior-level executives and board of director candidates for a broad cross section of publicly-held corporations. From 1983 to 1995 he worked for Korn/Ferry International as an executive recruiter and held the position of Managing Director. He spent fourteen years with Booz, Allen & Hamilton, and his last position was Vice President and Senior Client officer and he was responsible for generation of new business, the management of client assignments and the development of professional staff. Mr. Silverman is a graduate of University of Illinois with both a Bachelors and a Masters of Science in Finance. DONALD E. LAWSON served as a Director of LightPath and CEO since April 1998 until October 2001. He also served as President October 1997 until October 2001. He previously held the position of Executive Vice President from May 1995 until April 1998, Chief Operating Officer from June 1995 until March 2001 and Treasurer from September 1995 to July 2000. From 1991 to 1995, Mr. Lawson served as Vice President, Operations for Lukens Medical Corporation, a medical device 51
LightPath Technologies, Inc. - Form 10K, June 30, 2002 manufacturer. From 1980 to 1990, Mr. Lawson served in various capacities, including Production Superintendent, for Ethicon, Inc., a division of Johnson & Johnson and a manufacturer of medical products. Mr. Lawson received a B.B.A. degree in Finance from Texas A & M University. EXECUTIVE OFFICERS DENNIS YOST has been Executive Vice President, Chief Operating Officer since March 2001 and in June 2002 his title was changed to Senior Vice President of the newly formed Optical Lens Group. From 1997 to 2001, Mr. Yost was Managing Director - Process Sequence Integration Group for Applied Materials Corp., a manufacturer of semiconductor equipment. From 1989 to 1997, Mr. Yost held various positions with Texas Instruments Corp. ending with Engineering Manager for Digital Light Products Components Group. Mr. Yost graduated from Texas A&M University with a Bachelor of Science and Master of Science in Electrical Engineering. In 1995 he received his M.B.A. from Southern Methodist University. MARK A. FITCH has been Senior Vice President since March 1999 and in June 2002 he was named Senior Vice President of the newly formed Optical Integration Group. He joined LightPath in October 1997 as Vice President - Marketing & Sales and has also had increasing responsibilities in the telecommunication product development area. From 1994 to 1997, Mr. Fitch was Vice President - Operations for Geltech Inc., a specialty optics manufacturer. From 1985 to 1994, Mr. Fitch held various technical and commercial positions with Corning Incorporated, ending with Chief Engineer in the optics division. Mr. Fitch graduated Summa Cum Laude from the State University of New York with a Bachelor of Science in Physics. DONNA BOGUE has been Senior Vice President, Chief Financial Officer, Secretary/Treasurer since July 2000. She previously held the position of Vice President - Finance from November 1996 until June 2000. She joined LightPath in April 1996. Ms. Bogue was previously Chief Financial Officer for Hebenstreit Communications and Vice President and Controller for Diagnostek, Inc. During her career, she served as controller for a variety of companies and was an auditor with Ernst & Young for five years. Ms. Bogue is an honors graduate of Northern Arizona University with a Bachelor of Science in Accountancy. She obtained her CPA license in 1981 and is a member of the AICPA. ROBERT CULLEN has been Chief Executive Officer, President and was a director of Horizon since its inception in July 1997 until LightPath acquired Horizon in April 2000. In June 2002 he was named Senior Vice President of the newly formed Laser Component Group. Prior to co-founding Horizon, Mr. Cullen was a laser packaging engineer with Ortel Corporation between 1993 and 1997, where he was responsible for the design and manufacturing of several laser transmitter models. Prior to Ortel, Mr. Cullen served as an Engineering Technologist with the prestigious DuPont Engineering Development Laboratory (EDL) between 1982 and 1993, where he received numerous awards for various projects. In 1989, Mr. Cullen served on a field assignment to a British Telecom-DuPont joint venture (BT&D Technologies) in Ipswich, England, where he acted as project manager for products such as semiconductor optical amplifiers, tunable semiconductor lasers and 1480 pump lasers. In 1990, Mr. Cullen earned a patent for a miniature optical isolator and co-authored a paper on high gain optical amplifiers. Mr. Cullen pursued a Bachelors Degree in Electrical Engineering at Drexel University, Philadelphia, Pennsylvania. DR. JEAN-LUC NOGUES has been the President and CEO of Geltech since its acquisition by LightPath Technologies in September 2000. He was named CTO in June 2002. He has been involved with Geltech since its inception and had served as COO, CTO, and Vice President of R&D. Dr. Nogues has a proven track record of leadership in the development and commercialization of the Company's technologies and products that led to several awards. Many of the advancements developed by Geltech are in the fields of advanced optical components, glass micro-optics, diffraction optics and sol-gel technology. His background also includes the management of the University of Florida's Sol-Gel research group that was the incubation phase of the creation of Geltech. Prior to that, Dr. Nogues worked for six year on glass development as an Engineering Technologist with the R & D department of the Atomic Energy Commission in France. During that time he also consulted with several companies in the field of optics and materials science. Over the years he has produced more than 40 publications and holds several patents and patent applications in the field of optics and materials science. Dr. Nogues has a Bachelor of Science in Mathematics and 52
Mechanical Engineering and he received his Master degree and PhD in Materials Science and Engineering from the University of Montpellier, France. SECTION 16(a) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE Section 16(a) of the Securities Exchange Act of 1934 requires our officers and directors, and persons who own more than 10% of a registered class of our equity securities, to file reports of ownership and changes in ownership with the Securities and Exchange Commission ("SEC"). Officers, directors and greater than 10% stockholders are required by SEC regulation to furnish us with copies of all Section 16(a) forms they file. Based solely upon a review of the copies of such forms furnished to us, or written representations that no Forms 5 were required, we believe that during the year ended June 30, 2002, all Section 16(a) filing requirements applicable to its officers, directors and greater than 10% beneficial owners were complied with. ITEM 10. EXECUTIVE COMPENSATION. The information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference. ITEM 11. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT. The information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference. ITEM 12. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS. The information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference. 53
LightPath Technologies, Inc. - Form 10K, June 30, 2002 ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K. (a) Financial Statements - Index page F-1 Independent Auditors' Report on Consolidated Financial Statements Consolidated Balance Sheets Consolidated Statements of Operations Consolidated Statements of Stockholders' Equity Consolidated Statements of Cash Flows (b) Exhibits Exhibit Number Description ------ ----------- 3.1 Certificate of Incorporation of Registrant, as amended 1 3.2 Certificate of Designations filed November 10, 1995 with the Secretary of State of the State of Delaware 1 3.3 Bylaws of Registrant 1 3.4 Certificate of Designation filed November 2, 1999 with the Secretary of State of the State of Delaware 2 9.1 Rights Agreement dated May 1, 1998 3 10.4 Directors Compensation Agreement with Amendment for Robert Ripp 6 10.6 Omnibus Incentive Plan 4 10.7 Directors Stock Option Plan 5 10.8 Amended Omnibus Incentive Plan 6 10.9 Merger Agreement dated April 14, 2000 between Registrant and Horizon Photonics, Inc. 7 10.10 Merger Agreement dated August 9, 2000 between Registrant and Geltech, Inc. 8 23.1 Consent of KPMG LLP * 99.1 Certification * 1. This exhibit was filed as an exhibit to Our Registration Statement on Form SB-2 (File No: 33-80119) and is incorporated herein by reference thereto. 2. This exhibit was filed as an exhibit to Our Registration Statement on Form S-3 (File No: 333-94303) dated January 10, 2000 and is incorporated herein by reference thereto. 3. This exhibit was filed as an exhibit to Our Registration Statement on Form 8-A (File No: 000-27548) dated April 28, 1998 and is incorporated herein by reference thereto. 4. This exhibit was filed as an exhibit to Our Registration Statement on Form S-8 (File No: 333-23515 and 333-23511, respectively) dated March 18, 1997 and is incorporated herein by reference thereto. 5. This exhibit was filed as an exhibit to Our Registration Statement on Form S-8 (File No: 333-50976) dated November 30, 2000 and is incorporated herein by reference thereto. 6. This exhibit was filed as an exhibit to Our Registration Statement on Form S-3 (File No: 333-37622) dated June 12, 2000 and is incorporated herein by reference thereto. 54
LightPath Technologies, Inc. - Form 10K, June 30, 2002 7. This exhibit was filed as an exhibit to Our Registration Statement on Form S-3 (File No: 333-47992) dated October 20, 2000 and is incorporated herein by reference thereto. * Filed herewith. d) The following reports on Form 8-K were filed under the Securities Exchange Act of 1934 during the quarter ended June 30, 2002: 1. Current report on Form 8-K dated April 3, 2002, announced the fiscal 2002, third quarter conference call would be held on April 25, 2002. 2. Current report on Form 8-K dated April 25, 2002, included the third quarter of fiscal 2002 financial results. 55
LIGHTPATH TECHNOLOGIES, INC. INDEX TO CONSOLIDATED FINANCIAL STATEMENTS Report of KPMG LLP, Independent Auditors ....................................F-2 Consolidated Financial Statements Consolidated Balance Sheets..................................................F-3 Consolidated Statements of Operations........................................F-4 Consolidated Statements of Stockholders' Equity..............................F-5 Consolidated Statements of Cash Flows........................................F-6 Notes to Consolidated Financial Statements...................................F-7 F-1
REPORT OF KPMG LLP, INDEPENDENT AUDITORS The Board of Directors LightPath Technologies, Inc.: We have audited the accompanying consolidated balance sheets of LightPath Technologies, Inc., and subsidiaries as of June 30, 2002 and 2001, and the related consolidated statements of operations, stockholders' equity, and cash flows for each of the years in the three year period ended June 30, 2002. These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We conducted our audits in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion. In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of LightPath Technologies, Inc., and subsidiaries as of June 30, 2002 and 2001, and the results of their operations and their cash flows for each of the years in the three year period ended June 30, 2002 in conformity with accounting principles generally accepted in the United States of America. KPMG LLP Albuquerque, New Mexico August 2, 2002 F-2
LIGHTPATH TECHNOLOGIES, INC. CONSOLIDATED BALANCE SHEETS <TABLE> <CAPTION> JUNE 30, JUNE 30, 2002 2001 ------------- ------------- <S> <C> <C> ASSETS Current assets: Cash and cash equivalents $ 13,177,624 $ 29,273,034 Trade accounts receivable - less allowance of $278,255 and $120,947 1,560,198 2,579,483 Inventories (NOTE 2) 2,403,644 5,414,587 Other receivables and advances to employees 761,065 442,116 Prepaid expenses and other 770,302 616,071 ------------- ------------- Total current assets 18,672,833 38,325,291 Property and equipment - net (NOTE 3) 6,664,374 12,046,891 Goodwill and intangible assets - net (NOTE 4) 8,054,179 25,683,341 Investment in LightChip, Inc. and other assets (NOTE 6) 3,585,842 8,234,885 ------------- ------------- Total assets $ 36,977,228 $ 84,290,408 ============= ============= LIABILITIES AND STOCKHOLDERS' EQUITY Current liabilities: Accounts payable $ 1,002,374 $ 1,276,204 Accrued liabilities (NOTE 15) 1,835,040 300,263 Accrued payroll and benefits 549,241 1,131,252 Accrued severance and exit costs (NOTE 7) 1,059,680 -- Capital lease obligations and note payable (NOTE 8) 88,550 242,475 ------------- ------------- Total current liabilities 4,534,885 2,950,194 Deferred income taxes (NOTE 11) -- 3,316,304 Commitments and contingencies (NOTE 15) Redeemable convertible preferred stock (NOTE 9) $.01 par value; stated value of $10,000 per share; 5,000,000 shares authorized; none and 127 Series F shares issued and outstanding -- 1,417,070 Stockholders' equity: (NOTES 10 AND 12) Common stock: Class A, $.01 par value, voting; 34,500,000 shares authorized; 20,677,071 and 19,371,167 shares issued and outstanding 206,771 193,712 Additional paid-in capital 188,276,439 181,708,752 Accumulated deficit (156,040,867) (105,295,624) ------------- ------------- Total stockholders' equity 32,442,343 76,606,840 ------------- ------------- Total liabilities and stockholders' equity $ 36,977,228 $ 84,290,408 ============= ============= </TABLE> See accompanying notes. F-3
LIGHTPATH TECHNOLOGIES, INC. CONSOLIDATED STATEMENTS OF OPERATIONS <TABLE> <CAPTION> YEAR ENDED JUNE 30 -------------------------------------------- 2002 2001 2000 ------------ ------------ ------------ <S> <C> <C> <C> REVENUES Telecom product and lens sales $ 11,990,609 $ 25,257,391 $ 2,098,841 Product development fees and other sales 515,973 885,765 167,423 ------------ ------------ ------------ Total revenues 12,506,582 26,143,156 2,266,264 COSTS AND EXPENSES Cost of sales (exclusive of stock-based compensation of $27,824, $11,875 and none, for the years ended June 30, 2002, 2001 and 2000, respectively) 15,156,619 15,283,694 1,309,711 Selling, general and administrative (exclusive of stock-based compensation of $ 4,768,130, $11,127,536 and $3,144,490, for the years ended June 30, 2002, 2001 and 2000, respectively) 11,568,531 19,291,630 5,942,029 Research and development (exclusive of stock-based compensation of $13,766, $25,094 and none, for the years ended June 30, 2002, 2001 and 2000, respectively) 7,095,649 7,089,931 1,449,347 Asset impairment (NOTES 3 AND 4) 16,508,387 13,772,867 -- Stock-based compensation 4,809,720 11,164,505 3,144,980 Amortization of goodwill and intangibles 7,889,741 13,566,807 2,418,119 Employee severance and exit costs (NOTE 7) 1,059,680 -- -- Acquired in process research and development -- 9,100,000 4,200,000 ------------ ------------ ------------ Total costs and expenses 64,088,327 89,269,434 18,464,186 ------------ ------------ ------------ Operating loss (51,581,745) (63,126,278) (16,197,922) OTHER INCOME (EXPENSE) Investment income 1,102,259 2,436,438 1,062,952 Interest and other expense (203,851) (73,521) (475,097) ------------ ------------ ------------ Net loss $(50,683,337) $(60,763,361) $(15,610,067) Imputed dividend and premium on preferred stock (61,906) (89,549) (2,231,943) ------------ ------------ ------------ Net loss applicable to common shareholders (NOTE 13) $(50,745,243) $(60,852,910) $(17,842,010) ============ ============ ============ Basic and diluted net loss per share $ (2.56) $ (3.19) $ (1.86) ============ ============ ============ Number of shares used in per share calculation 19,807,383 19,064,141 9,586,817 ============ ============ ============ </TABLE> See accompanying notes. F-4
LIGHTPATH TECHNOLOGIES, INC. CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY <TABLE> <CAPTION> CLASS A COMMON STOCK ----------------------------- ADDITIONAL NUMBER OF PAID-IN ACCUMULATED SHARES AMOUNT CAPITAL DEFICIT TOTAL ------------- ------------- ------------- ------------- ------------- <S> <C> <C> <C> <C> <C> Balances at June 30, 1999 4,960,703 $ 49,607 $ 26,860,418 $ (26,600,704) $ 309,321 Issuance of common stock 66,429 664 258,136 -- 258,800 Exercise of stock options and unit purchase options 682,521 6,825 3,214,108 -- 3,220,933 Exercise of warrants Debt 577,350 5,774 1,264,396 -- 1,270,170 Equity 8,764,665 87,647 60,930,062 -- 61,017,709 Issuance of common stock upon conversion of 37 shares Series A, 1 share Series B, 84 shares Series C and 255 shares Series F convertible preferred stock 1,066,970 10,670 3,923,831 -- 3,934,501 Issuance of common stock upon conversion of 6% convertible debentures 569,801 5,698 1,313,423 -- 1,319,121 Issuance of common stock and stock options to acquire Horizon Photonics, Inc. 1,447,815 14,478 37,954,135 -- 37,968,613 Stock-based compensation -- -- 3,144,980 -- 3,144,980 Imputed dividend on Series F convertible preferred stock -- -- 2,094,662 (2,094,662) -- Premium on Series A , Series B, Series C and Series F convertible preferred stock -- -- -- (137,281) (137,281) Net loss -- -- -- (15,610,067) (15,610,067) ------------- ------------- ------------- ------------- ------------- Balances at June 30, 2000 18,136,254 $ 181,363 $ 140,958,151 $ (44,442,714) $ 96,696,800 Exercise of stock options 306,255 3,063 1,501,562 -- 1,504,625 Exercise of warrants and unit purchase options 50,217 502 65,487 -- 65,989 Issuance of common stock upon conversion of 26 shares Series F convertible preferred stock 55,704 557 273,620 -- 274,177 Issuance of common stock and stock options to acquire Geltech, Inc. 822,737 8,227 27,705,609 -- 27,713,836 Redemption E1, E2, E3 common stock -- -- 39,818 -- 39,818 Stock-based compensation -- -- 11,164,505 -- 11,164,505 Premium on Series F convertible preferred stock -- -- -- (89,549) (89,549) Net loss -- -- -- (60,763,361) (60,763,361) ------------- ------------- ------------- ------------- ------------- Balances at June 30, 2001 19,371,167 $ 193,712 $ 181,708,752 $(105,295,624) $ 76,606,840 Exercise of stock options 107,500 1,075 290,975 -- 292,050 Issuance of common stock upon conversion of 127 shares Series F convertible preferred stock 1,198,404 11,984 1,466,992 -- 1,478,976 Stock-based compensation -- -- 4,809,720 -- 4,809,720 Premium on Series F convertible preferred stock -- -- -- (61,906) (61,906) Net loss -- -- -- (50,683,337) (50,683,337) ------------- ------------- ------------- ------------- ------------- Balances at June 30, 2002 20,677,071 $ 206,771 $ 188,276,439 $(156,040,867) $ 32,442,343 ============= ============= ============= ============= ============= </TABLE> See accompanying notes. F-5
LIGHTPATH TECHNOLOGIES, INC. CONSOLIDATED STATEMENTS OF CASH FLOWS <TABLE> <CAPTION> YEAR ENDED JUNE 30 -------------------------------------------- 2002 2001 2000 ------------ ------------ ------------ <S> <C> <C> <C> CASH FLOWS FROM OPERATING ACTIVITIES Net loss $(50,683,337) $(60,763,361) $(15,610,067) Adjustments to reconcile net loss to net cash used in operating activities: Depreciation and amortization 10,922,531 16,261,789 3,090,322 Gain on sale of equipment (117,665) -- -- Provision for uncollectible accounts receivable 199,238 105,947 -- Debt discount -- -- 425,795 Write off abandoned patents 79,333 -- 132,011 Asset impairments 16,508,387 13,772,867 -- Stock-based compensation 4,809,720 11,164,505 3,144,980 Acquired in-process research and development -- 9,100,000 4,200,000 Changes in operating assets and liabilities (net of the effect of acquisitions): Trade receivables 820,047 (1,051,825) 639,450 Inventories 2,897,943 (2,656,444) (531,698) Prepaid expenses and other (28,346) (317,053) (197,858) Accounts payable and accrued liabilities, including payroll 678,936 (588,408) 1,451,545 Accrued severance and exit costs 1,059,680 -- -- ------------ ------------ ------------ Net cash used in operating activities (12,853,533) (14,971,983) (3,255,520) CASH FLOWS FROM INVESTING ACTIVITIES Property and equipment additions, net (2,757,528) (7,230,694) (5,148,438) Costs incurred in acquiring patents and license agreements (60,171) (84,630) (58,324) Proceeds from sale of assets 904,841 -- -- Proceeds from note receivable 33,201 -- -- Acquisitions, net of cash acquired -- (18,411) (2,164,662) Investment in LightChip (1,500,345) (7,234,885) (1,570,000) ------------ ------------ ------------ Net cash used in investing activities (3,380,002) (14,568,620) (8,941,424) CASH FLOWS FROM FINANCING ACTIVITIES Proceeds from issuance of 6% convertible debentures, net of discount and offering costs -- -- 893,326 Payment on notes payable and capital leases (153,925) (1,484,704) (30,000) Proceeds from sales of Convertible Series F preferred stock, net -- -- 3,880,324 Proceeds from exercise of common stock options and warrants, net 292,050 1,570,211 65,509,236 Proceeds from issuance of common stock -- -- 258,800 ------------ ------------ ------------ Net cash provided by financing activities 138,125 85,507 70,511,686 ------------ ------------ ------------ Net (decrease) increase in cash and cash equivalents (16,095,410) (29,455,096) 58,314,742 Cash and cash equivalents at beginning of period 29,273,034 58,728,130 413,388 ------------ ------------ ------------ Cash and cash equivalents at end of period $ 13,177,624 $ 29,273,034 $ 58,728,130 ============ ============ ============ SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION: Interest paid $ 9,210 $ 72,811 $ 1,180 Non-cash investing and financing activities: Class A common stock, warrant and stock options issued for acquisitions $ -- $ 27,713,836 $ 37,968,613 Class A common stock issued upon conversion of preferred stock $ 11,984 $ 557 $ 10,670 Note receivable in exchange for equipment $ 510,000 $ -- $ -- Conversion of redeemable convertible preferred stock to Class A common stock $ 1,478,976 $ 274,177 $ 3,934,501 Preferred stock premium $ (61,906) $ (89,549) $ (137,281) Class E common stock - redeemed in 2001 and issued in 2000 $ -- $ 40,221 $ 421 </TABLE> See accompanying notes. F-6
LIGHTPATH TECHNOLOGIES, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS JUNE 30, 2002 AND 2001 ORGANIZATION AND LIQUIDITY LightPath Technologies, Inc. ("LightPath" or the "Company") was incorporated in Delaware on June 15, 1992 as the successor to LightPath Technologies Limited Partnership formed in 1989, and its predecessor, Integrated Solar Technologies Corporation formed in 1985. On April 14, 2000, the Company acquired Horizon Photonics, Inc. ("Horizon"). On September 20, 2000, the Company acquired Geltech, Inc. ("Geltech"). The Company is engaged in the production of collimator, isolator, and precision molded aspheric optics used in the telecom components market, GRADIUM(R) glass lenses and other optical materials. The Company also performs research and development for optical solutions for the fiber telecommunications and traditional optics markets. As used herein, the terms ("LightPath" or the "Company"), refer to LightPath individually or, as the context requires, collectively with its subsidiaries on a consolidated basis. The Company has incurred substantial losses since inception. During fiscal year 1996, the Company completed an initial public offering ("IPO") and in fiscal years 1997, 1998 and 2000 the Company completed four private placements of convertible preferred stock and one private placement for convertible debentures to raise additional capital. These funds were used to further research, development and commercialization of optoelectronic products and GRADIUM glass lenses. During fiscal year 2000, warrants issued at the IPO and private placement warrants were exercised for approximately $65.5 million. The optical components markets have experienced a severe downturn throughout fiscal 2002, resulting in a significant decline in the demand for our products as well as our competitors. Cash used in operations for fiscal 2002 was approximately $12.9 million, a decrease of approximately $2.1 million from fiscal 2001. Throughout fiscal 2002 the Company reduced its cash expenditures through improved manufacturing efficiencies, suspension of selected development projects and consolidation of equipment and facilities. During the fourth quarter of fiscal 2002, the Company announced plans to consolidate lens product lines in Florida, close the New Mexico facilities and reorganize internally which will further decrease our cash requirements for fiscal 2003. While the Company has no firm commitments for any future financing at this time, with a cash balance of approximately $13.2 million at June 30, 2002, the Company will take the necessary actions to manage through this downturn. The Company believes that its financial resources will be sufficient to finance the Company's operations and capital expenditures, excluding acquisitions, for the next twelve months. 1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES CONSOLIDATED FINANCIAL STATEMENTS include the accounts of the Company and its wholly-owned subsidiaries. All significant intercompany transactions have been eliminated in consolidation. CASH AND CASH EQUIVALENTS consist of cash in the bank and temporary investments with original maturities of ninety days or less when purchased. INVENTORIES which consists principally of raw materials, lenses, isolators, collimators and components are stated at the lower of cost or market, on a first-in, first-out basis. Inventory costs include materials, labor and manufacturing overhead. PROPERTY AND EQUIPMENT are stated at cost and depreciated using both straight-line and accelerated methods over the estimated useful lives of the related assets ranging from three to seven years. Platinum molds less estimated salvage value are depreciated on a straight-line basis over the estimated useful lives ranging from one to two years. INTANGIBLE ASSETS consisting of goodwill, customer list and supply contracts, licenses, patents, trademarks and others are recorded at cost. Upon issuance of the license, patent or trademark, these assets are being amortized on the straight-line basis over the estimated useful lives of the related assets ranging from ten to seventeen years. Goodwill, customer list and supply contracts and other intangibles are being amortized on a straight-line basis F-7
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) over the estimated period of benefit ranging from two to five years. The recoverability of the carrying values of these intangible assets are evaluated on a recurring basis. Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable. When an evaluation is required, the estimated future undiscounted cash flows associated with the asset are compared to the asset's carrying amount to determine if a write-down to fair value is required. See Notes 3 and 4. INVESTMENTS consists of the Company's ownership interest in LightChip Inc. (LightChip) which is accounted for under the cost method. INCOME TAXES are accounted for under the asset and liability method. Deferred income tax assets and liabilities are computed for differences between the financial statement and tax bases of assets and liabilities that will result in taxable or deductible amounts in the future based upon enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established when necessary to reduce deferred tax assets to the amount expected to be realized. REVENUE is generally recognized from product sales when products are shipped to the customer provided that LightPath has received a valid purchase order, the price is fixed, title has transferred, collection of the associated receivable is reasonably assured, and there are no remaining significant obligations. Revenues from product development agreements are recognized as milestones are completed in accordance with the terms of the agreements. Provisions for estimated losses are made in the period in which such losses are determined. Sales to Finisar, Corp. were approximately $3 million which represents 24% of all revenues for the year ended June 30, 2002. Sales to the Agere Systems, Inc (formerly Microelectronics division of Lucent Technologies Inc.) were approximately $11.5 million which represents 44% of all revenues for the year ended June 30, 2001. Sales to Lucent Technologies, Inc., for the year ended June 30, 2000 were approximately $930,000 or 41% of total revenues. RESEARCH AND DEVELOPMENT costs are expensed as incurred. STOCK-BASED COMPENSATION is accounted for using the intrinsic value method as prescribed by APB Opinion No. 25, ACCOUNTING FOR STOCK ISSUED TO EMPLOYEES, under which no compensation expense is recognized when the exercise price of the employees stock option equals or exceeds the market price of the underlying stock on the date of grant and other requirements are met. For options issued to non-employees, stock-based compensation is accounted for using the fair value method as prescribed by Statement of Financial Accounting Standards No. 123, Accounting for Stock-Based Compensation (SFAS 123) and EITF Issue 96-18. Pro forma information required by SFAS 123 has been presented as if the fair value method using a Black-Scholes option pricing model had been applied. MANAGEMENT MAKES ESTIMATES and assumptions during the preparation of the Company's consolidated financial statements that affect amounts reported in the financial statements and accompanying notes. Such estimates and assumptions could change in the future as more information becomes known, which in turn could impact the amounts reported and disclosed herein. FAIR VALUES OF FINANCIAL INSTRUMENTS of the Company are disclosed as required by Statement of Financial Accounting Standards No. 107, Disclosures about Fair Values of Financial Instruments. The carrying amounts of cash and cash equivalents, trade accounts receivable, accounts payable and accrued liabilities approximate fair value. RECLASSIFICATION of certain amounts included in the prior year financial statements have been made to conform to the current year presentation. RECENT ACCOUNTING PRONOUNCEMENTS not yet adopted include Statement No. 142, Goodwill and Other Intangible Assets, which the Company will adopt on July 1, 2002. Statement 142 will require that goodwill and intangible assets with indefinite useful lives no longer be amortized, but instead be tested for impairment at least annually in accordance with the provisions of Statement 142. The Company has unamortized goodwill of approximately $2.3 million remaining at July 1, 2002, which will be subject to the transition provisions of Statement F-8
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) 142. Amortization expense related to goodwill was $1.3 million, $2.95 million and $2.95 million for the years ended June 30, 2002, 2001 and 2000, respectively. Following adoption of Statement 142, amortization expense, estimated at approximately $1.3 million for the year ended June 30, 2003, will no longer be recorded. 2. INVENTORIES The components of inventories include the following at June 30: 2002 2001 ---------- ---------- Raw materials $1,670,488 $3,208,838 Work in process 380,987 971,916 Finished goods 352,169 1,233,832 ---------- ---------- Total inventories $2,403,644 $5,414,587 ========== ========== Throughout fiscal 2002, the Company noted several factors that caused the re-evaluation of the carrying value of inventory resulting in charges to write down inventory to net realizable value, or to write off inventory to be disposed of given no alternative future use was identified. Total inventory charges of $1.9 million and $1.1 million were recorded during fiscal 2002 related to finished goods/work in process and raw materials inventory, respectively. Specifically, during the first and second quarters, inventory charges of $1.3 million were recorded as the Company continued to note declining quarterly sales from previous levels, lack of growth in sales orders and no sales in certain product areas where the Company had purchased raw materials. The Company also received notification that certain lenses and raw materials did not pass qualification requirements for their particular applications during the second quarter. During the fourth quarter, the manufacturing group changed the production methodology for performance improvements rendering some products obsolete that resulted in charges of $0.5 million. During the fourth quarter, the Company also noted that the value of certain finished lens and raw materials inventory had diminished due to changes in market conditions as some competitors reduced prices for similar products to a level below the Company's cost resulting in inventory write downs of $0.4 million. Finally, the Company noted uncertainty regarding the realization of certain finished products on hand due to cancelled purchase orders which resulted in write downs of $0.8 million during the fourth quarter. 3. PROPERTY AND EQUIPMENT Property and equipment consist of the following at June 30: 2002 2001 ----------- ----------- Manufacturing equipment $ 8,030,935 $13,755,183 Computer equipment and software 598,643 1,182,772 Furniture and fixtures 215,836 604,567 Platinum molds 63,895 656,073 Leasehold improvements 1,157,887 1,667,582 ----------- ----------- 10,067,196 17,866,177 Less accumulated depreciation 3,402,822 5,819,286 ----------- ----------- Total property and equipment $ 6,664,374 $12,046,891 =========== =========== During the second quarter of fiscal 2002, the Company recorded impairment charges to write off certain excess manufacturing equipment with a carrying value of approximately $0.6 million which was used in the production of collimators and was removed from service by the Company due to changes in the manufacturing process. The net carrying value of equipment held for disposal was approximately $280,000 at June 30, 2002. F-9
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) During the fourth quarter of fiscal 2001, the Company recorded an impairment charge of approximately $408,000 related to equipment held for disposal, expected to be completed during the first quarter of fiscal 2002. The net carrying value of the equipment held for disposal was approximately $90,000 at June 30, 2001. The equipment was used for the production of traditional optics in California, which the Company was consolidated into our Florida facility. The equipment was sold to a third party in September 2001 in exchange for $270,000 cash and a note receivable for $270,000 payable over a period of 5 years and a gain of approximately $390,000 was recorded. In addition, during the fourth quarter, certain manufacturing equipment and inventory with a net carrying value of $272,000 were sold to a third party for $32,000 and a note receivable of $240,000 (payable in fiscal 2003) in connection with a licensing agreement and no gain or loss was recognized. 4. INTANGIBLE ASSETS Intangible assets consist of the following at June 30: Life In years 2002 2001 -------- ----------- ----------- Goodwill 4 $ 5,203,365 $ 5,203,365 Customer list and supply contract 4 1,041,750 4,800,000 Developed technology 2 - 4 6,064,981 18,000,000 Covenant not-to-compete 3 3,100,000 3,100,000 Other intangibles 2 - 5 2,860,000 2,860,000 Patents and trademarks granted 10 - 17 643,388 582,787 License agreements -- 46,560 Patent applications in process 74,757 127,800 ----------- ----------- 18,988,241 34,720,512 Less accumulated amortization 10,934,062 9,037,171 ----------- ----------- Total intangible assets $ 8,054,179 $25,683,341 =========== =========== The Company's Geltech subsidary experienced sales growth during the first quarter of fiscal 2002, however, design changes by a major customer in October 2001 as well as the continued decline in the telecommications industry led to a significant decline in future sales projections and growth potential. The Company determined that the estimated future undiscounted cash flows remaining from the developed technology and customer list recorded in connection with the purchase of Geltech were below the carrying value of the related intangible assets. Accordingly, during the second quarter of fiscal year 2002 the Company recorded an impairment charge of approximately $4.9 million to write down the carrying value of these intangibles to their estimated fair value of approximately $4.7 million. The estimated fair values of the intangible assets were based on the anticipated discounted future cash flows from revised sales forecasts. In addition, the Company reversed the net deferred tax liability of approximately $3.3 million established in connection with the non-taxable purchase of Geltech against the related intangible assets prior to the impairment charge as the carrying value of the remaining Geltech intangible assets was reduced in connection with the impairment. During fiscal 2001, revenues from the sale of Horizon's products were substantial for the first nine months of fiscal 2001, however, Horizon had to defer sales under a supply contract to a significant customer beginning in May 2001. The Company determined that the aggregate estimated future undiscounted cash flows related to the customer supply contract and associated goodwill recorded in connection with the acquisition of Horizon were less then the carrying value of the related intangible assets and the intangibles were written down to their estimated fair value which resulted in an impairment charge of approximately $13.4 million being recorded in the fourth quarter of fiscal year 2001. In November 2001, the customer indicated they will not take delivery of any remaining orders which resulted in the impairment of the remaining carrying value of the customer supply contract of approximately $1.5 million during the second quarter of fiscal year 2002. F-10
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) 5. ACQUISITIONS The Company did not complete any acquisitions during the year ended June 30, 2002. The Company completed the acquition described below during the fiscal year ended June 30, 2001. On September 20, 2000, the Company acquired all of the outstanding shares of Geltech, for an aggregate purchase price of approximately $28.5 million, comprised of 822,737 shares of Class A common stock (valued at $27.5 million) and approximately $1 million in acquisition costs. The number of shares of Class A common stock issued to the former shareholders of Geltech was based on the average closing price of the Class A common stock for five days prior to the date of the purchase agreement, August 9, 2000. Geltech, a Delaware corporation, is a manufacturer of precision molded aspheric optics used in the active telecom components market to provide a highly efficient means to couple laser diodes to fibers or waveguides. The acquisition has been accounted for using the purchase method of accounting and, accordingly, the results of operations of Geltech have been included in the Company's consolidated financial statements from September 20, 2000. In the first quarter of fiscal 2001, the Company recorded a non-recurring charge of $9.1 million, due to acquired in-process research and development based on an assessment of the purchased technology of Geltech. This charge represents technology that did not meet the accounting definitions of "completed technology," and thus should be charged to earnings under generally accepted accounting principles. This assessment analyzed certain diffraction gratings, waveguides, lens arrays and sub-assembly technologies that were under development at the time of acquisition. These programs were in various stages of completion ranging from 30% to 50% of completion, with estimated completion dates through December 2001. This in-process research will have no alternative future uses if the products are not feasible. Revenues from in-process products were orginally estimated primarily beginning in fiscal 2002, with projected research and development costs-to-complete of approximately $2.25 million. The estimated fair value of these development programs was determined in accordance with views expressed by the staff of the Securities and Exchange Commission. During the year ended June 30, 2002, there were no significant sales generated from these programs and we concluded research efforts on two of these programs. 6. INVESTMENT IN LIGHTCHIP, INC. On May 21, 2002, LightChip issued additional shares of voting convertible preferred stock to certain existing shareholders of which the Company purchased its pro-rata interest of approximately $1.5 million. The Company's combined common stock and preferred stock voting interest in LightChip decreased to approximately 13% following the completion of the round. This equity round was at a price per share that was less than the carrying value of LightPath's existing investment in LightChip creating an other than temporary decline in the fair value of our investment that resulted in a write down of approximately $6.3 million during the quarter ending June 30, 2002. On August 21, 2000, LightChip issued additional shares of voting convertible preferred stock for $60 million, of which the Company funded $7.2 million, its pro-rata interest. On December 8, 1999, LightChip issued additional shares of voting convertible preferred stock for $16 million, of which the Company funded $1 million and the Company's combined common stock and preferred stock voting interest in LightChip decreased to approximately 18% following the investment. Accordingly, the Company began accounting for its investment in LightChip under the cost method in December 1999. In accordance with the SEC staff position stated in EITF Topic D-84, the Company's pro-rata share of LightChip losses through December 8, 1999, totaling $514,288 were not recognized as a result of the Company's additional investment. 7. RESTRUCTURING On June 27, 2002, the Company announced a restructuring plan to consolidate its corporate headquarters and manufacturing facilities in Albuquerque, New Mexico to Orlando, Florida by September 30, 2002. A restructuring accrual for employee severance and other exit costs was recorded at June 30, 2002 for approximately F-11
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) $1.1 million, which includes employee severance for 67 employees and other lease costs. As of June 30, 2002, none of the restructuring costs accrued were paid. The severance benefits will be paid prior to December 31, 2002 and the lease payments will be substantially complete by June 30, 2003. In addition, in the fourth quarter the Company recorded asset impairment charges of $3.2 million to write down the carrying value to estimated fair value less costs to sell of certain manufacturing and other equipment, and leasehold improvements held for disposal in connection with the Company's plan to relocate manufacturing operations and corporate headquarters to Florida during fiscal 2003. 8. CAPITAL LEASES AND NOTE PAYABLE The Company has capital lease obligations of approximately $10,000, payable in monthly installments including interest at 11.7%, which expire in September 2002. These obligations are generally secured by the equipment purchased under the agreement. Geltech is currently in negotiations with Corning Inc. related to their licensing agreement and has not repaid a balance of approximately $78,000 on the note payable to Corning Inc. that was originally due in July 1999. The Company does not accrue interest on the note (prime rate plus .5%) and the unpaid amount is included in the capital lease obligations and note payable at June 30, 2002. The Company incurred interest expense of $9,210, $77,904, and $1,180 in years ended June 30, 2002, 2001, and 2000, respectively. A line of credit for $500,000 expired in June 2002. 9. REDEEMABLE CONVERTIBLE PREFERRED STOCK Authorized 5,000,000 shares of preferred stock. From June 1997 to January 1998, the Board of Directors designated 950 shares as Series A, Series B and Series C Convertible Preferred Stock; $.01 par value. The Company entered into private placement transactions which provided proceeds on the sale of 785 shares of Series A, Series B and Series C Preferred Stock totaling $7,850,000, less issuance costs of approximately $660,000, resulting in net proceeds of approximately $7,190,000 by their respective final closing dates. As of June 30, 2001, all Series A, Series B and Series C shares were converted to common stock. In October 1999, the Board of Directors designated 500 shares as Series F Convertible Preferred Stock; $.01 par value. The Company entered into a private placement transaction which provided proceeds on the sale of 408 shares of Series F Preferred Stock totaling $4,080,000, less issuance costs of approximately $180,000 resulting in net proceeds of approximately $3,900,000 by the final closing date, November 2, 1999. During the third quarter of fiscal 2002, the 127 outstanding shares of Series F Convertible Preferred Stock outstanding were converted into 1,198,404 shares of Class A common stock. Designations, rights, and preferences related to the remaining preferred shares may be determined by the Board of Directors. The terms of any series of preferred stock may include priority claims to assets and dividends and voting or other rights. The Series A, Series B, Series C and Series F Convertible Preferred Stock (collectively "Convertible Preferred Stock") had a stated value and liquidation preference of $10,000 per share, plus an 8% per annum premium (7% Series F). The holders of the Convertible Preferred Stock are not entitled to vote or to receive dividends. Each share of Convertible Preferred Stock was convertible into Class A common stock at the option of the holder based on its stated value at the conversion date divided by a conversion price. The conversion price is defined as the lesser of $5.625, $7.2375, $6.675 and $5.00 for the Series A, Series B, Series C and Series F Convertible Preferred Stock, respectively, or 85% (80% Series F) of the average closing bid price of the Company's Class A common stock for the five days preceding the conversion date. The beneficial conversion feature in each of the Series A, Series B and Series C Preferred Stock was recognized as an imputed dividend prior to June 30, 1998. The beneficial conversion feature in the Series F Preferred Stock was recognized as an imputed dividend for the year ended June 30, 2000, in the amount of $2,094,662, increasing net loss applicable to common shareholders from the date of issuance to the first date that conversion can occur. F-12
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) Based on the SEC staff guidance addressed in EITF Topic D-98, which indicates that the possibility that any triggering event that is not solely within the control of the issuer could occur - without regard to probability - requires the security to be classified outside of permanent equity, the Company classified the Series F preferred stock outside of stockholders' equity, for all periods presented. Preferred stock activity during the fiscal periods ended June 30, 2002, 2001 and 2000 were as follows: CONVERTIBLE PREFERRED STOCK ----------------------------- SERIES A, SERIES B & SHARES OUTSTANDING AT: SERIES C SERIES F TOTAL -------- -------- ----- June 30, 1999 122 -- 122 ---- ---- ---- Issuance of Series F preferred stock -- 408 408 Conversions to common stock (122) (255) (377) ---- ---- ---- June 30, 2000 -- 153 153 ---- ---- ---- Conversions to common stock -- (26) (26) June 30, 2001 -- 127 127 Conversions to common stock -- (127) (127) ---- ---- ---- June 30, 2002 -- -- -- ==== ==== ==== 10. STOCKHOLDERS' EQUITY The Company completed an IPO on February 22, 1996 for the sale of 1,840,000 units at an initial public offering price of $5.00. Each unit consisted of one share of Class A common stock, one Class A warrant and one Class B warrant. Common Stock - The Company's common stock consists of the following: Authorized 34,500,000 shares of Class A common stock, $.01 par value. The stockholders of Class A common stock are entitled to one vote for each share held. The Company's authorized common stock includes, 2,000,000 shares of Class E-1 common stock, 2,000,000 shares of Class E-2 common stock and 1,500,000 shares of Class E-3 common stock (collectively the "E Shares" ) with $.01 par value. The stockholders of E Shares are entitled to one vote for each share held. Each E Share was automatically convertible into one share of Class A common stock in the event that the Company's income before provision of income taxes and extraordinary items or any charges which result from the conversion of the E Shares was equal to or in excess of a minimum value of approximately $13.5 million in fiscal 2000. Since the conversion provisions expired without being met as of June 30, 2000, the E Shares were redeemed by the Company, effective as of September 30, 2000. The former holders of E Shares will receive their redemption value of $.0001 per share as well as $0.40 per share in settlement of certain stockholder litigation beginning August 2002. See Note 15. Warrants Class C, Class E, Class G and Class K warrants were issued in connection with the private placements of Series A, Series B, Series C and Series F Convertible Preferred Stock. A total of 320,000 Class C, 317,788 Class E, 365,169 Class G and 489,600 Class K warrants were granted to the preferred stockholders which entitle the holder to purchase one share of Class A common stock at an exercise price of $5.63, $7.24, $6.68 and $5.00, respectively, expiring from July 2000 to November 2002. Each of the investors in the Series F Convertible Preferred Stock previously invested in the Company's Series A, B and C Preferred Stock. In order F-13
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) to induce them to invest in the Series F Convertible Preferred Stock, in November 1999 the Company reduced the applicable exercise prices by twenty percent and extended the expiration dates by three years for all outstanding Class C, E and G warrants issued in connection with the sale of such Series A, B and C Preferred Stock. A total of 64,000 Class D, 47,668 Class F, 58,427 Class H and 125,000 Class L warrants were granted to the placement agent for each private placement which entitles the holder to purchase one share of Class A common stock at an exercise price of $5.63, $7.24, $6.68 and $5.00 respectively, expiring from July 2002 until November 2004. The Company registered the resale of the Class A common stock underlying the Series A, Series B, Series C and Series F Preferred Stock and the associated warrants on individual Form S-3's which are all effective. During fiscal 2001, 47,000 private placement warrants were exercised resulting in the issuance of approximately 41,633 shares of Class A common stock. During fiscal 2000, approximately 1.6 million private placement warrants were exercised resulting in the issuance of approximately 1.3 million shares of Class A common stock. Other warrants include, warrants to purchase up to 281,250 shares of Class A Common Stock at $6.00 per share at any time through November 10, 2009 issued to Robert Ripp, on November 5, 1999 in connection with his election to serve as Chairman of the Board of Directors. As part of the agrement, Robert Ripp purchased 62,500 shares of LightPath Class A Common Stock for $4.00 per share. In connection with the Geltech acquisition, the Company assumed a warrant to purchase up to 6,753 shares of Class A Common Stock at $25.27 per share at any time through June 2004. The underlying shares for these warrants were registered on a Form S-3 which remain effective. The following table provides information on warrants during fiscal 2002, 2001, and 2000. <TABLE> <CAPTION> Warrants ----------------------------------------------------- Class Class C, E, G, D, F, H Outstanding Class A & B I & K J & L Other ----------- ---------- ---------- ---------- <S> <C> <C> <C> <C> June 30, 1999 4,519,000 914,068 123,345 -- ---------- ---------- ---------- ---------- Issuance of securities 2,950,469 916,950 275,000 281,250 Conversions and exercises - equity (7,469,469) (1,392,371) (201,345) -- Conversions - debt -- (427,350) (150,000) -- ---------- ---------- ---------- ---------- June 30, 2000 -- 11,297 47,000 281,250 ---------- ---------- ---------- ---------- Issuance of securities 6,753 Conversions and exercises - equity -- -- (47,000) -- ---------- ---------- ---------- ---------- June 30, 2001 -- 11,297 -- 288,003 ---------- ---------- ---------- ---------- June 30, 2002 -- 11,297 -- 288,003 ========== ========== ========== ========== </TABLE> F-14
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) 11. INCOME TAXES Due to the Company's losses from operations, there was no provision for income taxes during the years ended June 30, 2002, 2001, and 2000. Significant components of the Company's deferred tax assets and liabilities are as follows at June 30: <TABLE> <CAPTION> Deferred tax assets: 2002 2001 ------------ ------------ <S> <C> <C> Net operating loss and credit carryforwards $ 24,199,000 $ 20,648,000 Stock-based compensation 6,962,000 5,038,000 Investment in LightChip 3,056,000 523,000 Research and development expenses 1,195,000 232,000 Inventory 1,164,000 654,000 Accrued expenses and other 2,736,000 138,000 ------------ ------------ Gross deferred tax assets 39,312,000 27,233,000 Valuation allowance for deferred tax assets (35,674,000) (20,968,000) ------------ ------------ Total deferred tax assets 3,638,000 6,265,000 Deferred tax liabilities: Intangible assets (2,107,000) (8,704,000) Depreciation and other (1,531,000) (877,000) ------------ ------------ Total deferred tax liabilities (3,638,000) (9,581,000) ------------ ------------ Net deferred tax liability $ -- $ (3,316,000) ============ ============ </TABLE> The valuation allowance increased by approximately $14.7 million and $17.6 million during the years ended June 30, 2002 and 2001, respectively. To the extent that approximately $3.0 million of the valuation allowance related to acquired tax attributes is reduced in future periods, the benefit will be recognized as a reduction to goodwill and intangible assets prior to recording any future benefits. The reconciliation of income tax attributable to operations computed at the U.S. federal statutory tax rates and the actual tax provision of zero results primarily from the change in the valuation allowance. At June 30, 2002, the Company has consolidated net operating loss carryforwards for federal income tax purposes of approximately $60.5 million (including $8.5 million of acquired net operating losses) which will expire from 2009 through 2022, if not previously utilized. The Company also has research and development credit carryforwards of approximately $660,000 which will expire from 2009 through 2022, if not previously utilized. A portion of the net operating loss carryforwards and the majority of the research and development credit carryforwards are subject to certain limitations of the Internal Revenue Code which restrict their annual utilization in future periods due principally to changes in ownership in prior periods. 12. EMPLOYEE AND DIRECTOR STOCK OPTION PLANS At June 30, 2002, the Company has three stock based compensation plans which are described below. The Company applies APB Opinion No. 25 and related Interpretations and SFAS 123 (non-employee grants only) in accounting for its plans. No compensation costs have been recognized for its fixed stock options grants to employees where the fair market value of the underlying stock equaled the option price at the date of grant. In June 1992, the Company implemented the Omnibus Incentive Plan (the "Incentive Plan"), and the Directors Stock Option Plan (the "Directors Plan"). The Company has reserved 3,275,000 shares of common stock for awards under the Incentive Plan. The number of shares reserved for award under the Directors Plan at June 30, 2002 is 450,000 shares of common stock. The Incentive Plan authorizes the Company to grant various awards using common stock, and cash to officers and key employees of the Company. Prior to fiscal 2001, only incentive stock options had been issued under the plan with an F-15
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) exercise price equal to the fair market value of the underlying stock on the date the options are granted and an average vesting period of four years. During fiscal 2001, following the Geltech acquisition, the Company issued 130,000 stock options with exercise prices below fair market value on the date of grant. In addition, the Company issued 86,745 and 67,912 shares of common stock for time accelerated restricted stock awards to management during fiscal 2002 and 2001 respectively, which vest upon continued employment for five years, or three years if certain performance criteria are met. The intrinsic value of the restricted stock awards is being recognized over the vesting period. The Company recognized a stock-based compensation charge of approximately $310,000 and $330,000 in fiscal 2002 and 2001 respectively, related to the restricted stock awards and the in-the-money options. The term of the options granted under the Incentive Plan cannot exceed ten years and grants to stockholders who hold 10% or more of the Company stock cannot exceed five years from the date of grant. There are approximately 323,000 options under the Incentive Plan available for grant at June 30, 2002. The Directors Plan authorizes the Company to grant awards to certain eligible non-employee directors of the Company using common stock. Under the plan each non-employee director receives options to purchase shares of the Company common stock. Prior to fiscal 2001, the director's option vested ratably over their three year term. In fiscal 2001, the plan adopted an annual grant which vest monthly over the year. Each option granted under the Directors Plan will be granted at a price equal to the fair market value of the underlying stock on the date the options are granted with a term of ten years. There are approximately 63,000 options under the Director Plan available for grant at June 30, 2002. In addition, the Company has issued nonqualified options to certain directors, officers and consultants to the Company not covered by the Incentive or Directors Plans. In November 1999, the Company entered into a Directors Compensation Agreement, pursuant to which the Company's Chairman could elect to receive a restricted stock grant if the closing price of the Company's Class A common stock exceeded certain targets during the term of the agreement. During the quarter ended March 31, 2000, the target prices defined in the agreement were reached resulting in the recording of a non-cash stock-based compensation charge which was subject to adjustment for changes in the market value of the Class A common stock. Accordingly through March 31, 2000, the Company recognized a non-cash stock-based compensation charge of approximately $710,000, under the terms of the original agreement. Subsequent to March 31, 2000, the Company modified the terms of the Directors Compensation Agreement whereby the share substitution clause was deleted. The Chairman received two nonqualified stock option grants to acquire 1 million and 500,000 shares each of Class A Common Stock with a ten-year term which vest on December 1, 2001. The exercise prices are $6 and $24 per share, respectively. Based on the terms of the options granted (1 million granted with an exercise prices less than market), non-cash charges of approximately $18 million will be amortized over the vesting period of the options. In addition, 219,000 and 150,000 options were granted in fiscal 2001 and 2000, respectively, to officers at a price equal to the fair market value of the underlying stock on the date of grant, with a term of ten years. The board of directors accelerated the vesting of certain options issued which resulted in the recording of stock-based compensation charges of approximately $35,000 and $400,000 during the years ended June 30, 2001 and 2000, respectively. In the aggregate, approximately $4.8 million, $11.2 million and $3.1 million of non-cash charges were recorded for the years ended June 30, 2002, 2001 and 2000, respectively. F-16
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) A summary of the status of the stock option plans as of June 30, 2002, 2001 and 2000 and changes during the years ended is presented below: <TABLE> <CAPTION> Weighted Average Shares under option: Incentive Plan Directors Plan Nonqualified Exercise Price -------------- -------------- ------------ -------------- <S> <C> <C> <C> <C> Outstanding at June 30, 1999 998,874 206,049 39,928 $ 6.29 Granted at market value 718,321 60,227 650,000 $ 16.47 Granted below market value -- -- 1,000,000 $ 6.00 Exercised (419,257) (36,000) -- $ 4.77 Lapsed or canceled (18,181) -- (435) $ 5.18 ---------- ---------- ---------- ---------- Outstanding at June 30, 2000 1,279,757 230,276 1,689,493 $ 10.82 Granted at market value 1,032,781 80,000 219,000 $ 17.00 Granted below market value 130,000 -- -- $ 33.43 Exercised (254,656) (46,510) (7,645) $ 4.96 Lapsed or canceled (68,400) (24,642) (10,000) $ 14.99 ---------- ---------- ---------- ---------- Outstanding at June 30, 2001 2,119,482 239,124 1,890,848 $ 13.86 Granted at market value 643,145 64,000 262,000 $ 3.64 Exercised (107,500) -- -- $ 2.75 Lapsed or canceled (526,687) -- (66,000) $ 12.42 ---------- ---------- ---------- ---------- Outstanding at June 30, 2002 2,128,440 303,124 2,086,848 $ 12.12 ========== ========== ========== ========== Options exercisable: June 30, 2002 823,201 295,204 1,668,848 $ 12.46 ========== ========== ========== ========== June 30, 2001 565,270 215,188 66,848 $ 11.31 ========== ========== ========== ========== June 30, 2000 487,591 180,728 39,493 $ 6.67 ========== ========== ========== ========== </TABLE> The following table summarizes information about fixed stock options outstanding at June 30, 2002: <TABLE> <CAPTION> Options Outstanding Options Exercisable ------------------------------------------------- -------------------------------- Number Weighted-Avg. Number Range of outstanding at Remaining Weighted-Avg. Exercisable at Weighted-Avg. Exercise Prices June 30, 2002 Contractual Life Exercise Price June 30, 2002 Exercise Price - --------------- ------------- ---------------- -------------- ------------- -------------- <S> <C> <C> <C> <C> <C> $1 to 7.49 2,278,172 8.0 Years $ 4.97 1,475,266 $ 5.67 $7.5 to 15 716,000 8.0 $10.69 325,425 $10.12 $16 to 20 476,750 8.2 $17.80 228,500 $17.71 $21 to 30 889,522 8.0 $24.56 704,094 $24.33 $31 to 52 157,968 7.6 $34.34 53,968 $35.36 ---------- ---------- $1 to 52 4,518,412 8.0 $12.12 2,787,253 $12.46 ========== ========== </TABLE> Had compensation costs for the Company's stock based compensation plans been determined using the fair value method of FASB Statement No. 123, the Company's net loss would have been increased to the pro forma amounts indicated below for the years ended June 30: <TABLE> <CAPTION> 2002 2001 2000 -------------- -------------- -------------- <S> <C> <C> <C> Net loss applicable to common shareholders, as reported $ (50,745,243) $(60,852,910)) $ (17,842,010) ============== ============== ============== Net loss applicable to common shareholders, pro forma $ (55,829,000) $ (62,328,000) $ (18,719,000) ============== ============== ============== Basic and diluted net loss per share, as reported $ (2.56) $ (3.19) $ (1.86) ============== ============== ============== Basic and diluted net loss per share, pro forma $ (2.82) $ (3.27) $ (1.95) ============== ============== ============== </TABLE> F-17
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) The weighted-average fair value of options granted during the years ended June 30, 2002, 2001 and 2000 was $2.89, $13.63, and $9.33, respectively. The fair value of each incentive option grant is estimated on the date of grant using the Black-Scholes option-pricing model with the following weighted-average assumptions used for grants in fiscal: 2002 2001 2000 --- --- --- Expected Life (years) 3 3 3 Risk free interest rate 6% 7% 7% Volatility 150% 125% 125% Dividend Yield 0% 0% 0% 13. NET LOSS PER SHARE Basic net loss per common share is computed based upon the weighted average number of common shares outstanding during each period presented. The computation of Diluted net loss per common share does not differ from the basic computation because potentially issuable securities would be anti-dilutive. The following outstanding securities were not included in the computation of diluted earnings per share at June 30, 2002: 4,518,412 Class A common stock options, and private placement and other warrants to acquire 299,300 shares of Class A common stock. A premium ranging from 7 to 8 percent earned by the preferred shareholders of $61,906, $89,549, and $137,281 increased the net loss applicable to common shareholders for the years ended June 30, 2002, 2001, and 2000, respectively. In addition, net loss applicable to common shareholders was increased by an imputed dividend in the amount of $2,094,662 during the year ended June 30, 2000. The imputed dividend resulted from a beneficial conversion feature associated with the Series F Preferred Stock issued on November 2, 1999. 14. PENSION PLAN The Company implemented a defined contribution plan on January 1, 1997 covering substantially all employees. Annual discretionary contributions, if any, are made by the Company to match a portion of the funds employees contribute. Company matching contributions during the fiscal year ended June 30, 2001 were approximately $65,000. There were no company matching contributions made during the fiscal years ended June 30, 2002 and 2000. 15. COMMITMENTS AND CONTINGENCIES The Company has operating leases for office equipment and office space. At June 30, 2002, the Company has entered into lease agreements for manufacturing and office facilities in Albuquerque, New Mexico, Walnut, California, New Jersey, and Orlando, Florida. These leases, which are generally for five year terms with renewal options, expire beginning in September 2002 through November 2008. Equipment rental agreements are generally for three year terms. Equipment and office rent expense recognized for the years ended June 30, 2002, 2001, and 2000 was approximately $1.5 million, $950,000, and $285,000, respectively. Commitments under noncancelable operating leases, excluding amounts accrued as exit costs in connection with the Company's plan to relocate operations to Florida (see note 7),are approximately $0.8 million for 2003; $0.7 million for 2004; $0.6 million for 2005; $0.6 million for 2006 and $1.5 million for 2007 and beyond. The Company has employment agreements, which expire in March 2003 through September 2003, with officers and key employees which provide for an aggregate payment of salaries of approximately $0.7 million annually. The Company has outstanding purchase commitments for approximately $300,000 at June 30, 2002. The majority of these commitments are for raw materials and lens finishing. F-18
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) On May 2, 2000, the Company commenced a class action lawsuit in the Chancery Court of Delaware, New Castle County. The action seeks a declaratory judgment with respect to the Company's right to redeem the Class E Common Stock on March 31, 2001 for $.0001 per share, the right of the holders of Class E Common Stock to vote at the Annual Meeting to be held on October 6, 2000, and for certification of the holders of Class E Common Stock as a class and the named defendants as its representatives. The named defendants are Donald E. Lawson, former President, Chief Executive Officer and a Director of the Company, who owns an aggregate of 25,000 shares of Class E Common Stock, Louis G. Leeburg, a Director of the Company, who owns an aggregate of 7,272 shares of Class E Common Stock, and William Leeburg, who owns or controls an aggregate of 21,816 shares of Class E Common Stock. The Company entered into a proposed settlement of this lawsuit whereby the holders of Class E Common Stock could elect to receive either $.40 for each share of Class E Common Stock or a two year option to purchase one Class A Common Stock for each 100 shares of Class E Common Stock they hold. On January 8, 2001, the Delaware Chancery Court held a hearing on the proposed settlement and ruled on February 2, 2001, that holders of Class E Common Stock must be provided an opportunity to request exclusion from the settlement class. In December 2001, the Company agreed to proceed with the settlement to include a provision that each former E shareholder has the right to request exclusion from the settlement class. By June 30, 2002, the final settlement arrangements had been mailed to former holders of Class E Common Stock pursuant to which they would receive a settlement payment of $0.40 for each share. Approximately 3.6 million shares of Class E Common Stock will participate in the settlement whereas holders of approximately 0.5 million shares opted out of the settlement. The Company has determined that it is probable that the settlement offer will occur and an estimated settlement charge of $1.5 million has been accrued as of June 30, 2002. On or about June 9, 2000, a small group of holders of Class E Common Stock (the "Texas Plaintiffs") commenced an action in a state court in Texas (the "Texas Action"). The Texas Plaintiffs allege that the actions of the Company, and certain named individuals, leading up to and surrounding the Company's 1995 proxy statement constitute fraud, negligent misrepresentation, fraudulent inducement, breach of fiduciary duty and civil conspiracy. In general, the Texas Plaintiffs allege misrepresentations and omissions in connection with a request from the Company that its shareholders consent to a recapitalization, resulting in a 5.5 to 1 reverse stock split and the issuance of certain Class E Common Stock. The Texas Plaintiffs further allege that, as a result of the defendants' actions, they were induced to consent to the Company's recapitalization. The Company believes the allegations underlying the Texas Action have no basis in fact and that this lawsuit is without merit. The Company has retained counsel and is vigorously defending against these claims. The participants in the Texas Action will be provided the opportunity to accept the settlement discussed above. In addition, the Company participated in a mediation proceeding relating to the Texas Action on October 23, 2001. During fiscal 2002, the Company incurred and expensed legal fees associated with these claims of approximately $0.7 million, however, an insurance claim for the aggregate amount incurred in connection with the Texas Action in excess of applicable deductibles has been filed by the Company. During the first quarter of fiscal 2002, one of the insurance companies responsible for the claim, which had previously filed for reorganization, was declared insolvent. The Company is working with regulatory agencies to resolve and collect the monies due under this policy, although the Company currently considers any potential recovery under this policy as speculative. Accordingly, no claim for recovery is recorded as of June 30, 2002. On March 6, 2002, the Company commenced an action in a state court in New Mexico for various claims surrounding the now insolvent insurance carrier and the Company's former insurance broker. On November 15, 2000, the Company filed a complaint against Carmichael & Company LLC, in the State of New Mexico, for violation of its agreement with the Company as financial advisors and sought to terminate the agreement. On or about November 15, 2000, Carmichael & Company LLC filed a complaint against the Company in the State of New York, for breach of contract and claiming approximately $5 million in damages. On April 5, 2001, the parties met in New Mexico for mediation and was settled by payment of $1.3 million to Carmichael. The Company incurred approximately $300,000 in legal fees in connection with this matter during fiscal 2001. The financial advisor contract with Carmichael & Company LLC was terminated and both parties released the other from any further claims. F-19
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) The Company is involved in various legal actions arising in the normal course of business. After taking into consideration legal counsel's evaluation of such actions, management is of the opinion that their outcome will not have a significant effect on the Company's financial position or results of operations. 16. RELATED PARTY TRANSACTIONS During the fiscal years ended June 30, 2002, 2001, and 2000, current directors (or their firms) of the Company, provided legal and consulting services to the Company for which they billed the Company an aggregate of approximately $478,000, $405,000, and $425,000, respectively. Sales to Lucent Technologies, Inc., which owned approximately 3% of the outstanding Class A common stock of the Company, for the year ended June 30, 2000 were approximately $930,000. 17. SEGMENT INFORMATION Optoelectronics and Fiber Telecommunications ("Telecom"), represents 67% of total fiscal 2002 revenues of the Company, and Traditional Optics, represent 33% of total fiscal 2002 revenues, are the Company's reportable segments under SFAS No. 131,"Disclosure about Segments of an Enterprise and Related Information" (SFAS 131). The telecom segment is based primarily on the development and sale of fiber collimators and fiber-optic switches, free space isolators, precision molded aspheric optics and other related passive component products for the optoelectronics segment of the telecommunications industry. The traditional optics segment is based primarily upon the sale of lenses to the data storage and medical equipment market and the development and sale of GRADIUM glass in the form of lenses and blanks for the general optics markets. During fiscal 2002 approximately $3.4 million in telecom sales were derived from two isolator customers. During fiscal 2001 approximately $13.4 million in telecom sales were derived from one isolator and one collimator customer and approximately $.6 million of traditional lens sales were derived from one medical equipment customer. During fiscal 2000 approximately $1.3 million in sales were derived from one isolator and one collimator customer and approximately $227,000 of lens sales were derived from two YAG laser customers. F-20
LightPath Technologies, Inc. Notes to Consolidated Financial Statements June 30, 2002 and 2001 (Continued) Summarized financial information concerning the Company's reportable segments for the respective years ended June 30, is shown in the following table. Traditional Corporate Segment Information Telecom Optics And other (1) Total - ------------------- ------- ------ ------------- ----- Revenues (2) 2002 $ 8,339,467 4,167,115 -- $ 12,506,582 2001 $ 21,076,466 5,066,690 -- $ 26,143,156 2000 $ 1,497,911 768,353 -- $ 2,266,264 Segment operating loss (3) 2002 $ (11,705,885) (4,006,492) (35,869,368) $(51,581,745) 2001 $ (7,201,837) 73,162 (55,997,603) $(63,126,278) 2000 $ (7,540,317) (365,316) (8,292,289) $(16,197,922) Depreciation and amortization 2002 $ 8,147,870 2,534,427 240,234 $ 10,922,531 2001 $ 13,450,705 2,617,060 194,024 $ 16,261,789 2000 $ 2,468,543 558,205 63,574 $ 3,090,322 Capital expenditures for segment assets 2002 $ 1,649,634 401,379 706,515 $ 2,757,528 2001 $ 5,500,656 1,146,402 583,636 $ 7,230,694 2000 $ 2,768,108 2,255,552 124,778 $ 5,148,438 Total assets 2002 $ 16,733,907 5,283,454 14,959,867 $ 36,977,228 2001 $ 40,307,590 12,899,691 31,083,127 $ 84,290,408 Other Foreign Geographic Countries Information United States Canada (over 15) Total - ----------- ------------- ------ --------- ----- Revenues (4) 2002 $ 10,810,964 371,539 1,324,079 $ 12,506,582 2001 $ 22,236,329 1,678,633 2,228,194 $ 26,143,156 2000 $ 1,749,974 -- 516,290 $ 2,266,264 - ---------- (1) Corporate functions include certain members of executive management, the corporate accounting and finance function and other typical administrative functions which are not allocated to segments. Corporate assets include cash and cash equivalents, other receivables, advances, prepaid expenses and unallocated property and equipment. The Company's investment in LightChip is included in the assets of the Telecom segment. (2) There were no material inter-segment sales during the years ended June 30, 2002, 2001 or 2000. (3) In addition to unallocated corporate functions, management does not allocate restructuring charges, impairments, interest expense, interest income, other non-operating income and expense amounts in the determination of the operating performance of the reportable segments (4) Revenues attributed to foreign countries are export sales, and are based on the destination of the shipment. The Company has no long lived assets in a foreign country. F-21
LIGHTPATH TECHNOLOGIES, INC. In accordance with Section 13 or 15(d) of the Exchange Act, the registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized. LIGHTPATH TECHNOLOGIES, INC. By: /s/ Robert Ripp August 29, 2002 ------------------------------------ ROBERT RIPP DATE CHAIRMAN AND INTERIM CHIEF EXECUTIVE OFFICER, PRESIDENT In accordance with the Exchange Act, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated. <TABLE> <S> <C> /s/ Robert Ripp August 29, 2002 /s/ Kenneth Brizel August 29, 2002 - --------------------------------------------- --------------------------------------- Robert Ripp Kenneth Brizel, as of July 8, 2002 Chief Executive Officer, Interim Chief Executive Officer, President and President Director (Principal Executive Officer) (Principal Executive Officer) /s/ Donna R. Bogue August 29, 2002 - --------------------------------------------- Donna R. Bogue Senior Vice President, Chief Financial Officer and Treasurer (Principal Financial Officer) /s/ Robert Ripp August 29, 2002 /s/ James L. Adler Jr. August 29, 2002 - --------------------------------------------- --------------------------------------- Robert Ripp James L. Adler Jr. Chairman of the Board Director /s/ Robert Bruggeworth August 29, 2002 /s/ Louis Leeburg August 29, 2002 - --------------------------------------------- --------------------------------------- Robert Bruggeworth Louis Leeburg Director Director /s/ Dr. Steven R. J. Brueck August 29, 2002 /s/ Gary Silverman August 29, 2002 - --------------------------------------------- --------------------------------------- Dr. Steven R. J. Brueck Gary Silverman Director Director </TABLE> 56
CERTIFICATION I, Robert Ripp, certify that: 1. I have reviewed this annual report on Form 10-K of LightPath Technologies, Inc.; 2. Based on my knowledge, this annual report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this annual report; and 3. Based on my knowledge, the financial statements, and other financial information included in this annual report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this annual report. Date: August 29, 2002 /s/ Robert Ripp ------------------------------- Chief Executive Officer, LightPath Technologies, Inc. I, Donna Bogue, certify that: 4. I have reviewed this annual report on Form 10-K of LightPath Technologies, Inc.; 5. Based on my knowledge, this annual report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this annual report; and 6. Based on my knowledge, the financial statements, and other financial information included in this annual report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this annual report. Date: August 29, 2002 /s/ Donna Bogue ------------------------------- Chief Financial Officer, LightPath Technologies, Inc. 57