SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the Year End Commission File Number December 31, 2001 0-13646 DREW INDUSTRIES INCORPORATED (Exact Name of Registrant as Specified in its Charter) Delaware 13-3250533 (State or other jurisdiction of (I.R.S. Employer incorporation or organization) Identification Number) 200 Mamaroneck Avenue, White Plains, N.Y. 10601 (Address of principal executive offices) (Zip Code) Registrant's Telephone Number including Area Code: (914) 428-9098 Securities Registered pursuant to Section 12(b) of the Act: None Securities Registered pursuant to Section 12(g) of the Act: Common Stock (Title of Class) Check mark indicates whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes |X| No |_| Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X] Aggregate market value of voting stock (Common Stock, $.01 par value) held by non-affiliates of Registrant (computed by reference to the closing price as of March 7, 2002 was $72,722,732). The number of shares outstanding of the Registrant's Common Stock, as of the latest practicable date (March 7, 2002) was 9,683,563 shares of Common Stock. Documents Incorporated by Reference Annual Report to Stockholders for year ended December 31, 2001 is incorporated by reference into Items 6, 7 and 8 of Part II. Proxy Statement with respect to Annual Meeting of Stockholders to be held on May 16, 2002 is incorporated by reference into Part III.
FORWARD LOOKING STATEMENTS AND RISK FACTORS This Form 10-K contains certain statements, including the Company's plans and expectations regarding its operating strategy, products and costs, and its views of the prospects of the manufactured housing and recreational vehicle industries, which are forward-looking statements and are made pursuant to the safe harbor provision of the Securities Litigation Act of 1995. These forward-looking statements reflect the Company's views, at the time such statements were made, with respect to the Company's future plans, objectives, events and financial results, such as revenues, expenses, income, earnings per share, capital expenditures, and other financial items. Forward-looking statements are not guarantees of future performance; they are subject to risks and uncertainties. The Company does not undertake to update forward-looking statements to reflect circumstances or events that occur after the date the forward-looking statements are made. There are a number of factors, many of which are beyond the Company's control, which could cause actual results and events to differ materially from those described in the forward-looking statements. These factors include pricing pressures due to competition, raw material costs (particularly aluminum, vinyl, steel, glass, ABS resin, and tires), availability of retail and wholesale financing for manufactured homes, availability and costs of labor, inventory levels of retailers and manufacturers, interest rates, and adverse weather conditions impacting retail sales. In addition, general economic conditions and consumer confidence may affect the retail sale of manufactured homes and RV's. ITEM 1. BUSINESS Introduction Drew Industries Incorporated ("Drew" or the "Company") has two reportable operating segments, the manufactured housing products segment (the "MH Segment") and the recreational vehicle products segment (the "RV Segment"). Drew's wholly-owned subsidiaries, Kinro, Inc. ("Kinro") and Lippert Components, Inc. ("Lippert"), have operations in both the MH Segment and the RV Segment, while Lippert Tire & Axle, Inc. ("LTA") and Coil Clip, Inc. ("Coil Clip") operate entirely within the MH Segment. Kinro manufactures and markets aluminum and vinyl windows and thermo-formed bath and shower units for manufactured homes, and aluminum windows and doors for recreational vehicles. Lippert manufactures and markets steel chassis and steel chassis parts and galvanized roofing for manufactured homes, and manufactures and markets steel chassis and steel chassis parts for recreational vehicles. LTA manufactures and markets new axles, and refurbishes and distributes used axles, and distributes new and refurbished tires, for manufactured homes. Coil Clip produces coil steel and sheet steel components, certain of which are supplied to Lippert. Several of the Company's customers produce both manufactured homes and recreational vehicles, and the Company supplies products having similar characteristics for use in both these lines of business. Since 1980, the Company has acquired thirteen manufacturers of products for both manufactured homes and recreational vehicles, expanded its geographic market and product lines, added manufacturing facilities, integrated manufacturing, distribution and administrative functions, and developed new and innovative products. As a result, the Company currently operates 41 manufacturing facilities in 18 states and Canada, and achieved consolidated sales of $269 million for 2001. The Company was incorporated under the laws of Delaware on March 20, 1984, and is the successor to Drew National Corporation, which was incorporated under the laws of Delaware in 1962. The Company's principal executive and administrative offices are located at 200 Mamaroneck Avenue, White Plains, New York 10601; telephone number (914) 428-9098. The Common Stock of the Company is traded on the American Stock Exchange (symbol: DW). 2
Manufactured Housing Products Segment The Company's subsidiaries in the MH Segment manufacture and market a number of components for manufactured homes, including aluminum and vinyl windows and screens, thermo-formed bath and shower units, steel chassis and steel chassis parts, galvanized roofing, and new axles, and the Company refurbishes and distributes used axles and distributes new and refurbished tires. In 2001, the MH Segment represented approximately 60% of the Company's consolidated sales. The MH Segment also supplies related products to other industries, representing less than 5% of sales of this segment. Raw materials used by the Company's MH Segment, consisting of fabricated steel (coil, sheet, galvanized and I-beam), extruded aluminum and vinyl, glass, ABS resin, and various adhesive and insulating components, are available from a number of sources. Used axles and tires, which are refurbished by the Company, are purchased from dealers of manufactured homes and independent agents, and their availability is subject to competitive pricing. The Company maintains an aluminum hedging program under which it purchases futures contracts on the London Metal Exchange to hedge the prices of a portion of its anticipated requirements. During 2001, the Company did not purchase futures contracts. Operations of the Company's MH Segment consist primarily of fabricating, welding, thermo-forming, painting and assembling components into finished products, and refurbishing used axles and tires. The Company's MH Segment operations are conducted at 26 manufacturing and warehouse facilities throughout the United States, strategically located in proximity to the customers they serve. Three of these facilities also conduct operations in the Company's RV Segment. See Item 2. "Properties." The Company's manufactured housing products are sold by 19 sales personnel, working exclusively for the Company, to major builders of manufactured homes such as Champion Enterprises, Skyline, Clayton Homes, Oakwood Homes, and Cavalier Homes. The Company's MH Segment competes on the basis of price, customer service, product quality, and reliability. Although definitive information is not readily available, the Company believes that the two leading suppliers of windows for manufactured homes are the Company and Philips Industries, and that the Company's market share for windows and screens is more than 50%. The Company's manufactured homes chassis and chassis parts operations compete with several other manufacturers of chassis and chassis parts, as well as with certain builders of manufactured homes which produce their own chassis and chassis parts. The Company's thermo-formed bath unit operation competes with three other manufacturers of bath units. Although definitive information is not readily available, the Company believes that its market share for chassis and chassis parts for manufactured homes is approximately 15%, and that its share of the total market for bath units is approximately 40%. The market for refurbished axles and tires is highly fragmented, has low entry barriers, and is therefore highly competitive. Drew's axle and tire refurbishing operation has not performed well over the past several years, primarily due to increased competition, which severely affected operating margins. At the end of the third quarter of 2000, the Company announced that it was studying whether goodwill and fixed assets related to this operation had been impaired. Based upon this evaluation, it was determined that goodwill had been impaired, resulting in a non-cash charge of $6,897,000, which, along with a charge of $409,000 for plant closing expenses, were recorded in the fourth quarter of 2000. During 2001, the axle and tire refurbishing operation closed two of its five factories and sold the operations of a third factory. Although definitive information is not readily available, the Company believes that its market share for refurbished and new axles and tires is less than 15%. Recent Acquisition On June 1, 2001, the Company acquired the net assets of the Better Bath division of Kevco, Inc. Better Bath manufactures thermo-formed bath and shower units for the manufactured housing industry, and is operated 3
as a division of Kinro. The purchase price, including costs, for Better Bath was $10.2 million in cash, after adjustments for changes in working capital. Better Bath had sales of approximately $27.7 million in 2000, and $22.3 million in 2001, including $13.2 million in the seven months subsequent to the acquisition Recreational Vehicles Products Segment Through its wholly-owned subsidiaries, the Company manufactures and markets a number of components for recreational vehicles, including aluminum windows, a variety of doors, steel chassis, and steel chassis parts. In 2001, the RV Segment represented approximately 40% of the Company's consolidated sales. Raw materials used by the Company's RV Segment, consisting of fabricated steel (coil, sheet, tube and I-beam), extruded aluminum, glass, and various adhesive and insulating components, are available from a number of sources. The Company maintains an aluminum hedging program under which it purchases future contracts on the London Metal Exchange to hedge the prices of a portion of its anticipated requirements. During 2001, the Company did not purchase any futures contracts. Operations of the Company's RV Segment consist primarily of fabricating, welding, painting and assembling components into finished products, and tempering glass for its own use and for sale to other window manufacturers. The Company's RV Segment operations are conducted at 18 manufacturing and warehouse facilities throughout the United States, strategically located in proximity to the customers they serve. Three of these facilities also conduct operations in the Company's MH Segment. See Item 2. "Properties." The Company's recreational vehicles products are sold by 6 sales personnel, working exclusively for the Company, to major manufacturers of recreational vehicles such as Thor Industries (including Keystone which recently merged with Thor) Fleetwood Enterprises and Forest River. The Company's RV Segment operations compete on the basis of price, customer service, product quality, and reliability. Although definitive information is not readily available, the Company believes that there are several other suppliers of windows and doors for recreational vehicles. The Company's recreational vehicles chassis and chassis parts operations compete with several other manufacturers of chassis and chassis parts, as well as with certain manufacturers of recreational vehicles which produce their own chassis and chassis parts. The Company's operation as a supplier of chassis and chassis parts for recreational vehicles initially had only a small market share in 1997, but the Company's market share has been increasing substantially. Although definitive information is not readily available, the Company believes that its market share for chassis and chassis parts for recreational vehicles exceeds 40%. Recent Acquisitions During 2001, the Company acquired two manufacturers of chassis and chassis parts with combined annual sales of approximately $3 million. The aggregate purchase price for these operations was $1.4 million. Both operations have been integrated into Lippert. Regulatory Matters Windows produced by the Company for manufactured homes must comply with performance and construction regulations promulgated by the United States Housing and Urban Development Authority ("HUD") and by the American Architectural Manufacturers Association relating to air and water infiltration, thermal performance, emergency exit conformance, and hurricane resistance. Thermo-formed bath and shower units manufactured by the Company for manufactured homes must comply with performance and construction regulations promulgated by HUD, the American National Standards Institute, the American Society for Testing and Materials, and Underwriters Laboratory relating to fire resistance, electrical safety, color fastness, and stain resistance. 4
Windows and doors produced by the Company for the recreational vehicle industry are regulated by The United States Department of Transportation Federal Highway Administration ("DOT"), National Fire and Protection Agency, and the National Electric Code governing safety glass performance, egressability, door hinge and lock systems, egress window retention hardware, and baggage door ventilation. Manufactured homes are built on steel chassis which are fitted with axles and tires sufficient in number to support the weight of the home, and are transported by producers to dealers via roadway. When the home is installed at the site, the axles and tires are usually repurchased and removed by the dealer or installer. Regulations promulgated by HUD require the axles to be inspected after each use and refurbished or, if necessary, replaced. The Company purchases from dealers and independent agents, and repairs and refurbishes, used axles and tires, and markets the refurbished axles and tires to producers of manufactured homes. In accordance with regulations promulgated by HUD, refurbished axle assemblies distributed by the Company are refurbished in accordance with a detailed Quality Control Program formulated by an independent inspection agency. Compliance with the Quality Control Program is monitored by the inspection agency on a monthly basis. All expenses of formulating the program, inspection, and monitoring are paid for by the Company. In addition, new and refurbished tires distributed by the Company are subject to regulations promulgated by DOT and by HUD relating to weight tolerance, maximum speed, size, and components. The Company's operations are also subject to certain federal, state and local regulatory requirements relating to the use, storage, discharge and disposal of hazardous chemicals used during their manufacturing processes. The Company believes that it is currently operating in compliance with applicable laws and regulations, and does not believe that the expense of compliance with these laws and regulations, as currently in effect, will have a material effect on the Company's capital expenditures, earnings or competitive position. Employees The number of persons employed full-time by the Company and its subsidiaries at December 31, 2001 was 2,379. The Company and its subsidiaries believe that relations with its employees are good. 5
Item 2. PROPERTIES The Company's manufacturing operations are conducted at facilities that are used for both manufacturing and warehousing. In addition, the Company maintains administrative facilities used for corporate and administrative functions. The following is a chart identifying the Company's properties: MH PRODUCTS SEGMENT <TABLE> <CAPTION> City State Square Feet Owned Leased ---- ----- ----------- ----- ------ <S> <C> <C> Birmingham (1) Alabama 36,000 X Boaz Alabama 86,600 X Double Springs Alabama 62,500 X Ocala Florida 47,100 X Fitzgerald (2) Georgia 55,300 X Nampa Idaho 39,500 X Garret Indiana 21,600 X Goshen Indiana 100,000 X Goshen Indiana 58,000 X Goshen Indiana 68,000 X Middlebury Indiana 79,400 X Bristol Indiana 57,500 X Arkansas City Kansas 7,800 X Bossier City Louisiana 11,400 X Cairo Georgia 105,000 X Waxahachie Texas 200,000 X Whitehall New York 12,700 X Harrisburg North Carolina 58,000 X Liberty North Carolina 47,000 X Sugarcreek Ohio 14,500 X Denver (2) Pennsylvania 72,600 X Dayton Tennessee 100,000 X Mansfield Texas 61,500 X Alvarado (2) Texas 49,700 X Waco Texas 43,000 X Lancaster Wisconsin 12,300 X ------ 1,507,000 ========= </TABLE> (1) This facility was vacated in March 2002. The Company has no further obligation with respect to the lease. (2) These plants also produce products for recreational vehicles. 6
RV PRODUCTS SEGMENT City State Square Feet Owned Leased ---- ----- ----------- ----- ------ Fontana California 108,800 X Rialto California 62,700 X Fitzgerald (1) Georgia 23,700 X Goshen Indiana 50,500 X Elkhart (2) Indiana 36,600 X Goshen Indiana 98,000 X Goshen Indiana 87,800 X Crawfordsville Indiana 17,800 X Goshen Indiana 53,000 X Pendleton Oregon 56,800 X Denver (1) Pennsylvania 10,700 X Alvarado (1) Texas 21,300 X Longview Texas 58,900 X Berkley Springs West Virginia 53,400 X Ontario Canada 39,900 X Denver Indiana 12,000 X Elkhart Indiana 42,000 X Campbellsville Kentucky 26,900 X ------ 860,800 ======= (1) These plants also produce products for manufactured homes. (2) Purchased in February 2002. ADMINISTRATIVE City State Square Feet Owned Leased ---- ----- ----------- ----- ------ Arlington Texas 9,400 X Naples Florida 4,500 X White Plains New York 2,800 X ----- 16,700 ====== In addition, the Company (i) owns a 35,500 square feet building in McAdoo, Pennsylvania, and a 53,200 square feet building in Phil Campbell, Alabama which are held for sale and have been leased to third parties, and (ii) leases a 13,000 square feet building in Omaha, Nebraska and a 12,000 square feet building in Edgerton, Ohio which are held for sublease. 7
Item 3. LEGAL PROCEEDINGS On or about December 11, 2000, Lippert Tire & Axle Texas Limited Partnership ("LT&A"), an indirect subsidiary of the Company, was served with a Summons and Complaint in an action entitled Ace Tire & Axle, Inc. vs. Lippert Tire & Axle Texas Limited Partnership, Terry Winskey and John Penny, pending in the United States District Court, Eastern District of Texas (Marshall Division), Civil Action No. 2:00 CV254-TJW. Plaintiff alleged that defendants conspired to fix prices in violation of Section 1 of the Sherman Antitrust Act under Section 4 of the Clayton Act, as well as in violation of Texas antitrust laws. Plaintiff sought damages in an unspecified amount, treble damages, and costs of the proceeding. LT&A denied the allegations in the Complaint and vigorously defended against the allegations. On January 4, 2002, the parties agreed to settle the matter for an aggregate of $75,000, of which LT&A agreed to pay $37,500. The Company is not a party to any legal proceedings which, in the opinion of Management, could have a material adverse effect on the Company or its consolidated financial position. Item 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS None. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT The following tables set forth certain information with respect to the Directors and Executive Officers of the Company as of December 31, 2001. <TABLE> <CAPTION> Name Position - ---- -------- <S> <C> Leigh J. Abrams President, Chief Executive Officer and Director of the Company since (Age 59) March 1984. Edward W. Rose, III Chairman of the Board of Directors of the Company since March (Age 60) 1984. David L. Webster Director of the Company since March 1984. (Age 66) L. Douglas Lippert Director of the Company since November 1997. (Age 54) James F. Gero Director of the Company since May 1992. (Age 56) Gene H. Bishop Director of the Company since June 1995. (Age 72) Chief Financial Officer of the Company since January 1986 and Fredric M. Zinn Executive Vice President of the Company since February 2001. (Age 50) Harvey J. Kaplan Secretary and Treasurer of the Company since March 1984. (Age 67) </TABLE> LEIGH J. ABRAMS has also been President, Chief Executive Officer and a Director of LBP, Inc. ("LBP") since July 1994, and a Director of Impac Mortgage Holdings, Inc., a specialty finance company organized as a real estate investment trust, since April 2001. 8
EDWARD W. ROSE, III, for more than the past five years, has been President and principal stockholder of Cardinal Investment Company, Inc., an investment firm. Mr. Rose also serves as a director of the following public companies: Osprey Holding, Inc., previously engaged in selling computer software for hospitals; Liberte Investors, Inc., engaged in real estate loans and investments; and ACE Cash Express, Inc., engaged in check cashing services. Since July 1994, Mr. Rose has also been Chairman of the Board of LBP. DAVID L. WEBSTER, since November 1980, has been President and Chief Executive Officer of Kinro, Inc., a subsidiary of the Company, and Chairman of Kinro, Inc. since November 1984. L. DOUGLAS LIPPERT, since October 1997, has been President and Chief Executive Officer of Lippert Components, Inc., a subsidiary of the Company, and President of the predecessor of Lippert Components, Inc. since 1978. Mr. Lippert has also been President of Coil Clip, Inc., a subsidiary of the Company, since its acquisition in December 1998 and President of Lippert Tire & Axle a subsidiary of the Company, since September 1999. JAMES F. GERO, since March 1992, has been Chairman and Chief Executive Officer of Sierra Technologies, Inc., a manufacturer of defense systems technologies, and a director of its affiliates. Since May 1995, Mr. Gero has been Chairman of Clearwire, Inc., a provider and servicer of high-speed Internet access. Mr. Gero also serves as a director of Orthofix International, N.V., a publicly-owned international supplier of orthopedic devices for bone fixation and stimulation. Since July 1994, Mr. Gero has also been a Director of LBP. GENE H. BISHOP, from March 1975 until July 1990, was Chief Executive Officer of MCorp, a bank holding company, and from October 1990 to November 1991, was Vice Chairman and Chief Financial Officer of Lomas Financial Corporation, a financial services company. From November 1991 until his retirement in October 1994, Mr. Bishop served as Chairman and Chief Executive Officer of Life Partners Group, Inc., a life insurance holding company. Mr. Bishop also serves as a director of the following publicly-owned companies: Liberte Investors, Inc., engaged in real estate loans and investments; and Southwest Airlines Co., a regional airline. FREDERICK B. HEGI, JR., (58) was nominated to the Board of Directors in March 2002 to fill the vacancy on the Board created by the resignation of J. Thomas Schieffer. Mr. Hegi is a founding partner of Wingate Partners, including the indirect general partner of each of Wingate Partners L.P. and Wingate Partners II, L.P. Since May 1982, Mr. Hegi has served as President of Valley View Capital Corporation, a private investment firm. He is a director of Lone Star Technologies, Inc., a diversified company engaged in the manufacture of tubular products; Pro Parts Xpress, Inc., a wholesale distributor of automotive parts; and ENSR International, an international environmental service firm. Mr. Hegi was also Chairman, President and Chief Executive Officer of Kevco, Inc., a publicly held distributor of building products to the manufactured housing and recreational vehicle industries, which filed for protection under Chapter 11 of the United States Bankruptcy Code on February 5, 2001. J. THOMAS SCHIEFFER, a Director of the Company since May 2000, resigned as a Director on July 27, 2001 after his appointment and confirmation as United States Ambassador to Australia. FREDRIC M. ZINN has also been Chief Financial Officer of LBP since July 1994. Mr. Zinn is a Certified Public Accountant. HARVEY J. KAPLAN has also been Secretary and Treasurer of LBP since July 1994. Mr. Kaplan is a Certified Public Accountant. 9
Compliance with Section 16(a) of the Securities Exchange Act Section 16(a) of the Securities Exchange Act of 1934, as amended, requires the Company's executive officers and directors, and persons who beneficially own more than ten percent of the Company's equity securities, to file reports of ownership and changes in ownership with the Securities and Exchange Commission and the American Stock Exchange. Officers, directors and greater than ten-percent shareholders are required by SEC regulation to furnish the Company with copies of all Section 16(a) forms they file. Based on its review of the copies of such forms received by it, the Company believes that during 2001 all such filing requirements applicable to its officers and directors (the Company not being aware of any ten percent holder during 2001 other than Edward W. Rose, III and L. Douglas Lippert, directors of the Company) were complied with. PART II Item 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS are incorporated by reference to the Company's Annual Report to Stockholders for the year ended December 31, 2001. Dividend Information The Company has not paid any cash dividends on its Common Stock. Future dividend policy with respect to the Common Stock will be determined by the Board of Directors of the Company in light of prevailing financial needs and earnings of the Company and other relevant factors. The Company's dividend policy is subject to certain restrictions contained in its 6.95% Senior Notes and in other financing agreements. Item 6. SELECTED FINANCIAL DATA, and Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS are incorporated by reference to the Company's Annual Report to Stockholders for the year ended December 31, 2001. Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK The Company is exposed to market risk in the normal course of its operations due to its purchases of certain commodities, and its investing and financing activities. Certain raw materials, particularly aluminum, steel, vinyl, glass, ABS resins and tires are subject to price volatility. While effective hedges for most of these raw materials are not available, the Company periodically purchases aluminum futures contracts to hedge the impact of future price fluctuations on a portion of its aluminum raw material requirements. During 2001, the Company did not purchase any futures contracts. The Company is exposed to changes in interest rates primarily as a result of its financing activities. At December 31, 2001, the Company had approximately $53 million of fixed rate debt. Assuming a decrease of 100 basis points in the interest rate for borrowings of a similar nature, which the Company becomes unable to capitalize on in the short-term as a result of the structure of its fixed rate financing, future cash flows would be affected by approximately $530,000 per annum. The Company also has a $25 million line of credit that is subject to a variable interest rate. At December 31, 2001, $200,000 was borrowed pursuant to this line of credit. 10
In addition, the Company is exposed to changes in interest rates as a result of temporary investments in government backed money market funds, however, such investing activity is not material to the Company's financial position, results of operations, or cash flow. If the actual change in interest rates is substantially different than 100 basis points, the net impact of interest rate risk on the Company's cash flow may be materially different than that disclosed above. Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA, are incorporated by reference to the Company's Annual Report to Stockholders for the year ended December 31, 2001. Item 9. DISAGREEMENTS ON ACCOUNTING AND FINANCIAL DISCLOSURE Not applicable. PART III Part III of Form 10-K is incorporated by reference to the Company's Proxy Statement with respect to its Annual Meeting of Stockholders to be held on May 16, 2002. PART IV Item 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES and REPORTS ON FORM 8-K (a) Documents Filed: (1) Financial Statements. The Consolidated Financial Statements of the Company and its subsidiaries are incorporated by reference to the Consolidated Financial Statements and Notes to Consolidated Financial Statements in the Company's Annual Report to Stockholders for the year ended December 31, 2001. (2) Schedules. Schedule II - Valuation and Qualifying Accounts. (3) Exhibits. See "List of Exhibits" at the end of this report incorporated herein by reference. (b) Reports on Form 8-K None 11
SIGNATURES Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized. Date: March 25, 2002 DREW INDUSTRIES INCORPORATED By: /s/ Leigh J. Abrams ----------------------------- Leigh J. Abrams, President Pursuant to the requirements of the Securities and Exchange Act of 1934, as amended, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities and dates indicated. Each person whose signature appears below hereby authorizes Leigh J. Abrams and Harvey J. Kaplan, or either of them, to file one or more amendments to the Annual Report on Form 10-K which amendments may make such changes in such Report as either of them deems appropriate, and each such person hereby appoints Leigh J. Abrams and Harvey J. Kaplan, or either of them, as attorneys-in-fact to execute in the name and on behalf of each such person individually, and in each capacity stated below, such amendments to such Report. <TABLE> <CAPTION> Date Signature Title - ---- --------- ----- <S> <C> <C> March 25, 2002 By: /s/ Leigh J. Abrams Director, President and Chief ----------------------------- Executive Officer (Leigh J. Abrams) March 25, 2002 By: /s/ Harvey J. Kaplan Secretary and Treasurer ----------------------------- (Harvey J. Kaplan) March 25, 2002 By: /s/ Fredric M. Zinn Executive Vice President and ------------------------------ Chief Financial Officer (Fredric M. Zinn) March 25, 2002 By: /s/ John F. Cupak Controller ----------------------------- (John F. Cupak) March 25, 2002 By: /s/ Edward W. Rose, III Director ----------------------------- (Edward W. Rose, III) March 25, 2002 By: /s/ David L. Webster Director ----------------------------- (David L. Webster) March 25, 2002 By: /s/ L. Douglas Lippert Director ----------------------------- (L. Douglas Lippert) March 25, 2002 By: /s/ James F. Gero Director ----------------------------- (James F. Gero) March 25, 2002 By: /s/ Gene H. Bishop Director ----------------------------- (Gene H. Bishop) </TABLE> 12
Independent Auditors' Report The Board of Directors Drew Industries Incorporated: Under date of February 6, 2002, we reported on the consolidated balance sheets of Drew Industries Incorporated and subsidiaries as of December 31, 2001 and 2000, and the related consolidated statements of income, stockholders' equity, and cash flows for each of the years in the three-year period ended December 31, 2001, as contained on pages 15 through 28 in the 2001 annual report to stockholders. These consolidated financial statements and our report thereon are incorporated by reference in the annual report on Form 10-K for the year 2001. In connection with our audits of the aforementioned consolidated financial statements, we also have audited the related financial statement schedule as listed in Item 14. This financial statement schedule is the responsibility of the Company's management. Our responsibility is to express an opinion on this financial statement schedule based on our audits. In our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein. KPMG LLP Stamford, Connecticut February 6, 2002 13
DREW INDUSTRIES INCORPORATED AND SUBSIDIARIES SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS (in thousands) <TABLE> <CAPTION> COLUMN A COLUMN B COLUMN C COLUMN D COLUMN E - -------- -------- -------------------------- -------- -------- Additions -------------------------- Balance At Charged To Charged To Balance At Beginning Costs and Other End Of Period Expenses Accounts Deductions Of Period <S> <C> <C> <C> <C> <C> YEAR ENDED DECEMBER 31, 2001: Allowance for doubtful accounts receivable, trade $ 1,023 $ (6) $ 33(a) $ 351(b) $ 699 YEAR ENDED DECEMBER 31, 2000: Allowance for doubtful accounts receivable, trade $ 521 $ 559 $ (57)(b) $ 1,023 YEAR ENDED DECEMBER 31, 1999: Allowance for doubtful accounts receivable, trade $ 690 $ (214) $ (45)(b) $ 521 </TABLE> (a) Represents balance at date of acquisition of acquired companies. (b) Represents accounts written-off net of recoveries. 14
EXHIBIT INDEX Exhibit Sequentially Number Description Numbered Page - -------------------------------------------------------------------------------- 3. Articles of Incorporation and By-laws. 3.1 Drew Industries Incorporated Restated Certificate of Incorporation. 3.2 Drew Industries Incorporated By-laws, as amended. Exhibit 3.1 is incorporated by reference to Exhibit III to the Proxy Statement-Prospectus constituting Part I of the Drew National Corporation and Drew Industries Incorporated Registration Statement on Form S-14 (Registration No. 2-94693). Exhibit 3.2 is incorporated by reference to the Exhibit bearing the same number included in the Annual Report of Drew Industries Incorporated on Form 10-K for the fiscal year ended August 31, 1985. 10 Material Contracts. 10.27 Lease between Kinro, Inc. and Robert A. White and Larry B. White, dated June 1, 1979, as amended. 10.39 Leases between Robert A. White, Larry B. White and Kinro, Inc. dated July 25, 1983, as amended. 10.47 Registration Agreement among Drew Industries Incorporated and the Leslie-Locke Shareholders dated August 28, 1985. 10.100 Drew Industries Incorporated Stock Option Plan, as amended. 10.134 Letter, dated April 28, 1988, from Drew Industries Incorporated to Leigh J. Abrams confirming compensation arrangement. 10.135 Description of split-dollar life insurance plan for certain executive officers. 10.146 Form of Plan and Agreement of Distribution between Leslie Building Products, Inc. and Drew Industries Incorporated dated July 29, 1994. 10.147 Form of Shared Services Agreement between Leslie Building Products, Inc. and Drew Industries Incorporated dated July 29, 1994. 10.148 Form of Tax Matters Agreement between Leslie Building Products, Inc. and Drew Industries Incorporated dated July 29, 1994. 10.160 Agreement and Plan of Merger, dated October 7, 1997, by and among Drew Industries Incorporated, Lippert Acquisition Corp., Lippert Components, Inc. and the shareholders of Lippert Components, Inc. named therein. 15
10.161 Registration Rights Agreement, dated October 7, 1997, by and among Drew Industries Incorporated, Lippert Acquisition Corp., and certain shareholders of Lippert Components, Inc. named therein. 10.164 Executive Employment and Non-Competition Agreement, dated October 7, 1997, by and between Lippert Components, Inc. and L. Douglas Lippert. 10.165 Note Purchase Agreement, dated January 28, 1998, by and among Kinro, Inc, Lippert Components, Inc. and Shoals Supply, Inc. (collectively, the "Note Co-Issuers") and Teachers Insurance and Annuity Association of America, ING Investment Management, Inc. as agent for Midwestern Life Insurance Company, Security Life of Denver Insurance Company, Equitable Life Insurance Company of Iowa and USG Annuity & Life Insurance Company (collectively, the "Note Purchasers"). 10.166 6.95% Senior Notes due January 28, 2005 in the aggregate principal amount of $40,000,000 issued by the Note Co-Issuers to the Note Purchasers. 10.167 Pledge Agreements, dated January 28, 1998, by and between The Chase Manhattan Bank, as trustee for the benefit of the Note Purchasers and, separately, Registrant, Kinro, Inc., Shoals Supply, Inc., Kinro Manufacturing. 10.168 Guarantee Agreement, dated January 28, 1998, by and among Registrant and the Note Purchasers. 10.169 Subsidiary Guaranty, dated January 28 1998, by Kinro Holding Inc., Kinro Manufacturing, Inc., Shoals Holding, Inc., Kinro Texas Limited Partnership, Kinro Tennessee Limited Partnership, Shoals Supply Texas Limited Partnership and Shoals Supply Tennessee Limited Partnership (collectively, the "Subsidiaries") in favor of the Note Purchasers. 10.170 Collateralized Trust Agreement, dated January 28, 1998, by and among the Note Co-Issuers and the Note Purchasers. 10.171 Subordination Agreement, dated January 28, 1998, by and among Registrant, the Note Co-Issuers, Lippert Components, Inc., the Subsidiaries, and the Note Purchasers. 10.172 $25,000,000 Revolving Credit Facility - Credit Agreement, dated January 28 1998, by and among Kinro, Inc., and Lippert Components, Inc. (The "Borrowers") and The Chase Manhattan Bank ("Chase") and KeyBank National Association ("KeyBank") (together, the "Lenders"). 10.173 $15,000,000 Revolving Credit Note, dated January 28, 1998, made by the Borrowers to Chase. 10.174 $10,000,000 Amended and Restated Revolving Credit Note, dated January 28, 1998, made by the Borrowers to KeyBank. 10.175 Company Guarantee Agreement, dated January 28, 1998, made by Registrant to Chase, as agent for the Lenders. 10.176 Subsidiary Guarantee Agreement, dated January 28, 1998, made by each direct and indirect subsidiary of Registrant (other than the Borrowers) in favor of Chase, as agent for the Lenders. 10.177 Subordination Agreement, dated January 29, 1998, made by each direct and indirect subsidiary of Registrant and Chase, as agent for the Lenders. 16
10.178 Pledge and Security Agreement, dated January 28, 1998, made by Registrant, the Borrowers, and certain indirect subsidiaries of Registrant in favor of Chase, as collateral agent. 10.179 $25,000,000 Revolving Credit Facility - Amended and Restated Credit Agreement, dated January 28 1998, as amended and restated as of November 13, 2001, by and among Kinro, Inc., Lippert Tire & Axle, Inc. and Lippert Components, Inc. (the "Borrowers") and JP Morgan Chase Bank ("Chase") and KeyBank National Association ("KeyBank") (together, the "Lenders"). 10.180 $15,000,000 Amended and Restated Revolving Credit Note, dated November 13, 2001, made by the Borrowers to Chase. 10.181 $10,000,000 Amended and Restated Revolving Credit Note, dated November 13, 2001, made by the Borrowers to KeyBank. 10.182 Supplement to Subsidiary Guarantee Agreement, dated November 13, 2001, made by each direct and indirect subsidiary of Registrant (other than the Borrowers) in favor of Chase, as agent for the Lenders. 10.183 Supplement to Subordination Agreement, dated November 13, 2001, between each direct and indirect subsidiary of Registrant and Chase, as agent for the Lenders. 10.184 Supplement to Pledge and Security Agreement, dated November 13, 2001, made by the Borrowers, and certain indirect subsidiaries of Registrant in favor of Chase, as collateral agent. 10.185 Amendment No. 1 to Note Purchase Agreement, effective as of November 14, 2001, by and among Kinro, Inc, Lippert Components, Inc. and Lippert Tires Axle, Inc. (collectively, the "Note Co-Issuers") and Teachers Insurance and Annuity Association of America, ING Investment Management, Inc. as agent for Midwestern Life Insurance Company, Security Life of Denver Insurance Company, Equitable Life Insurance Company of Iowa and USG Annuity & Life Insurance Company (collectively, the "Noteholders"). 10.186 Replacement 6.95% Senior Notes due January 28, 2005 in the aggregate principal amount of $32 million issued by the Note Co-Issuers to the Noteholders. 10.187 Amendment No. 1 to Pledge Agreement, dated as of November 14, 2001, by and between JP Morgan Chase Bank, as trustee for the benefit of the Noteholders, and Lippert Components, Inc. 10.188 Subsidiary Joinder, dated as of November 14, 2001 by Coil Clip, Inc. and LD Realty, Inc. in favor of the Noteholders. 10.189 Supplement to Subordination Agreement, dated as of November 14, 2001, by and among Registrant, the subsidiaries party thereto, and the Noteholders. 10.190 Amended and Restated Employment Agreement by and between Kinro, Inc. and David L. Webster, dated April 4, 2000. Exhibit 10.27 is incorporated by reference to the Exhibits bearing the same number indicated on the Registration Statement of Drew National Corporation on Form S-1 (registration No. 2-724920). Exhibit 10.39 is incorporated by reference to the Exhibit included in the Annual Report of Drew National Corporation on Form 10-K for the fiscal year ended August 31, 1983. 17
Exhibit 10.47 is incorporated by reference to the Exhibits included in the Company's Current Report on Form 8-K dated September 6, 1985. Exhibit 10.100 is incorporated by reference to Exhibit A to the Proxy Statement of the Company dated May 10, 1995. Exhibit 10.134 is incorporated by reference to the Exhibit bearing the same number included in the Company's Transition Report on Form 10-K for the period September 1, 1992 to December 31, 1993. Exhibit 10.135 is incorporated by reference to the Exhibit bearing the same number included in the Company's Transition Report on Form 10-K for the period September 1, 1992 to December 31, 1993. Exhibits 10.146-10.148 are incorporated by reference to the Exhibits bearing numbers 10.1, 10.3 and 10.4, respectively, included in Post-Effective amendment No. 1 on Form 10/A, dated August 30, 1994, to the Registration Statement of Leslie Building Products, Inc. on Form 10 (Registration No. 0-24094). Exhibits 10.161 and 10.164 are incorporated by reference to the Exhibits included in the Company's Current Report on Form 8-K dated October 16, 1997. Exhibits 10.165 - 10.178 are incorporated by reference to the Exhibits bearing the same numbers included in the Company's Annual Report on Form 10-K for the year ended December 31, 1997. Exhibits 10.179-10.190 are filed herewith. 13. 2001 Annual Report to Stockholders. Exhibit 13 is filed herewith. _______________ 21. Subsidiaries Exhibit 21 is filed herewith. _______________ 23. Consent of Independent Auditors. Exhibit 23 is filed herewith. _______________ 24. Powers of Attorney. Powers of Attorney of persons signing this Report are included as part of this Report. 18